光接口

硬件设计采用高性能的CPU、高速以太网控制芯片，以太网光接口和电接口，高速光串行接口；

The hardware design adopts a high-performance CPU , high-speed Ethernet controller , Ethernet optical interface and electrical interface and high-speed serial optical interface .

10G以太网光接口及其实现

10 Gigabit Ethernet Optical Interface and Its Implementation

数字化可寻址调光接口（DALI）是一种专用于照明控制系统的通信接口规范。

Digital Addressable Lighting Interface ( DALI ) is a communication regulation suiting for lighting system management .

SDH之所以具有强大的生命力和广泛的适应性，主要有两个原因：提供统一标准的光接口和电接口，使不同厂家设备实现横向兼容；

The reasons of the wide applicability of SDH are : First , it provides worldwide standards for electrical interface and optical interface , which can promote multi-vendor interoperability ;

709标准应用到实际光接口盘的设计中，并通过实验验证了FEC技术的良好效果。

Digital wrapper technology was used in the design of optical transponder unit . The benefits of using FEC technology were verified by experiment .

2.5Gbit/sSDH系统中2×STM-4光接口盘的研制

The development of 2 × STM-4 optical interface board in 2.5 Gbit / s SDH system

目前许多接入网设备都要求具备STM-1光接口，因此本论文研究的STM-1模块设计与实现，对SDH接入网设备相关模块的研发具有一定参考价值。

Today many access network facilities have STM-1 optical interface . So this dissertation is helpful to design the STM-1 module of access network facilities .

OC-192c核心路由器光接口卡设计与实现

Design and Realize the Optical Interface Card of OC-192c Core Router

以太网以其成本低、灵活等明显的优势成为了各种数据业务的首选，而SDH因为具有同步复用、标准光接口和强大的网管功能等核心特点一统了电信传输网的天下。

Ethernet has become the first choice in various data business because of its obvious advantage of low-cost , agility , etc. At the same time , SDH control the telecom transmission for its core characteristics , such as synchronized duplication , standard optical interface and mighty management function .

第四章研究了光接口板的各个重要模块的设计。

The design of each important module is studied in the 4th chapter .

光接口板和光发射机/接收机的连接

Optical Interface Board , and Optical Transmitters / Receivers

波分复用系统光接口主要性能参数的实验研究

Experimental study of optical interface key parameters based on wavelength division multiplexing system

程控交换机中光接口的设计

Design of Optical Interface in Digital Switching System

具有数字化可寻址调光接口的电子镇流器的设计

Design of Digital Addressable Lighting Interface Ballast

电源（参见）光接口板（参见）

Optical Interface Board ( See )

它具有统一的数字传输体制，同步复用，网管丰富规范，标准光接口等优点。

It has many advantages such as an universal digital transportation system , synchronous multiplex , multiple network management and tandard optical interface .

在系统测试部分重点介绍光接口的指标及测试：包括测试的主要仪器的原理、使用方法；

Introduce the index and test of all interface especially partly in system testing : Including the principle , operation method of the main instrument that test ;

根据红外热像仪对高速数据传输以及数据网络共享的需要，基于光接口的设计，采用了光纤通道技术。

According to the demand of high speed data transmitting and data network share in infrared calorie-image instrument , and considering of the design of light interface , the fiber channel technology is adopted .

基于Linux操作系统，以千兆光互连接口卡为网络接口，设计实现了一种可用于机群系统的双环光互连网络。

A Linux-based twin-ring optical interconnection network is introduced , which can be used in computer cluster , including the design of optical interconnection interface card , the device driver , and the architecture .

RS-232C串行光隔离接口

RS - 232C Serial Optical Isolated Interface

本文提出了一种新的用户光网络接口（UNI）信令协议，以实现动态指配光网络资源的功能。

A novel optical User Network Interface ( UNI ) signaling protocol for optical network dynamic resource provisioning is proposed for dynamic lightpath provisioning .

光网络接口技术的另一重点是外部网络网络接口（E-NNI），文中主要从信令过程和所支持服务两方面对E-NNI功能进行了分析论证，强调了接口技术在光网络中的重要作用。

Another optical network interface technology focused on the external network-network interface , signaling procedure and services supported is the main research contents .

SFX为第二代GBIC技术，主要包括SFP/SFF封装方案，是光网络接口技术上的一项创新。

As the second-generation technology of GBIC , SFX mainly includes the encapsulation solution of SFP / SFF , which is an innovation on the interface technology of optical-fiber network .

生物电放大器计算机光隔离接口电路

The optically isolated interface circuit of bioelectric amplifier computer

顶层为数字路由结点和光网络接口卡组成的星型网，底层为光网络接口卡连接而成的环形网。

The top layer was a star network which was made up of a digital routing node and optical network interface cards , and the bottom layer was ring networks which were made up of optical network interface cards .

介绍了基于Linux操作系统，以光互连链路接口卡为网络硬件接口编制并行计算环境的物理层链路驱动软件的设计方法和程序结构等。

The design method of physical link driver software for Linux , which uses optical interconnection link as network interface for parallel computing , is introduced .

本文设计和实现了具有PCI总线峰值带宽传输能力的光互连网络接口卡。

In this paper , an optical network interface card with PCI bus peak bandwidth transmission rate has been designed and implemented .

2.5Gb/s是目前最流行的传输速率，其相应transponder用于SDH/SONETOC-48/STM-16的光/电接口。文章介绍了2.5Gb/sopticaltransponder的功能、结构等技术和相应的设计方案。

2.5 Gb / s is the most popular velocity now , the interrelated transponder is used in the optical / electricity connection of SDH / Sonet OC-48 / STM-16 . This article introduced the technology and designed scheme of 2.5 Gb / s optical transponder .

光网络的接口功率问题

The optical power at the interface of optical network

3G光接入网的接口协议分析

The Analyse of Interface Protocols in 3G Optical Access Networks