仿真过程

基于BP网络的红外图像压缩仿真过程分析

Analysis of Simulation Process of Infrared Image Compression Based on BP Network

基于OpenGL的数控车削动态仿真过程及图形显示

Dynamic simulation process of NC turning and display of graphics based on openGL

渐开线链轮CAD软件给出了传动用齿形链各种节距下的渐开线链轮的二维图形以及加工仿真过程。

2-D drawings of involutes sprockets and machined process were given in the software of involutes sprockets .

介绍一种基于MEMS技术的微型电磁继电器的制造工艺和仿真过程。

The fabrication and simulation of an electromagnetic microrelay based on MEMS technology are presented .

较好的解决了EDA设计、仿真过程的新问题。

It preferably settles the new problems in the EDA design and simulation .

在星载合成孔径雷达的设计、分析、模拟和仿真过程中，计算机辅助设计（CAD）起到了不可磨灭的作用。

Compute Aided Design ( CAD ) plays an indelible part in the procedure of spaceborne SAR design , analysis , simulation and emulation .

最后，给出了WDM光网络性能分析与优化的交互式仿真过程。

Finally , an interactive simulation process for the WDM network performance optimization is proposed .

由于仿真过程直观高效，此方法可作为其他控制系统PID参数优化的参考。

For the simulation is visualized and efficient , it can be used as reference for PID parameter optimization of other control system .

利用力反馈设备PhantomDesktop模拟舵轮，实现手动操舵的虚拟仿真过程。

Based on functional requirements , we use force feedback devices PHANTOM Desktop to simulate manual steering process .

给出了模型参数的矩估计和电容器的平均退化量、可靠度、平均寿命等可靠性指标评估的Bootstrap仿真过程。

The reliability index , such as average degradation , reliability and average life are estimated by Bootstrap simulation method .

利用软件测试技术理论的思想，以ECA规则作为执行推动力，从流程功能和结构方面研究仿真过程；

With the software testing and ECA rules , it studies workflow simulation from functions and structures .

为了改善系统性能，在仿真过程中采用变结构PID控制以及力矩控制与位置控制相互切换的方法，这些方法在试验过程中取得很好的效果。

The variable structure PID control and switching between torque control and position control were used to improve the performance of system during the simulation , which had good effects in the experimentation .

模型验证表明：交通仿真过程中，在车辆跟驰模型实施之前，利用Bayes算法模型化驾驶员在多源信息刺激下任务集聚、协同反应的过程是行之有效的。

The model verification shows that the Bayes algorithm is effective to model the task concentration and the cooperative reaction before the car-following model is implemented .

应用LS-DYNA软件，实现圆管液压胀形的模拟仿真过程，为具体的成形实验提供了参考。

By using the explicit code LS-DYNA , the tube hydroforming process was simulated and reference was provided for the practical forming experiments .

在DIS仿真过程中，过程数据的记录与事后的重演对演练过程的再现起着决定性的作用。

It is very important for reappearing of the drill process that the data of the course has been recorded and feedback in the course of DIS simulation .

通过无刷直流电机控制系统的设计及在线仿真过程，介绍了基于dSPACE的半实物仿真技术。

Through brushless direct current motor control system designing and the on-line simulation processing , hardware-in-the-loop simulation system based on dSPACE was presented .

通过合理的方式，将仿真过程中得到的每一仿真数据跟RGB系统结合起来，时域稳步推进过程当中，将仿真数据通过动态的二维FDTD图像显示出来。

Each simulation data obtained during the simulation is combined with RGB system through reasonable manner . During the time-domain process , the simulation data is displayed via a dynamic Two-dimensional FDTD images .

该文以面向对象分析和设计为基础，利用C++和OpenGL，使用三角形图元造型来研究数控机床加工异形螺旋杆的仿真过程。

Based on Object-Oriented analysis & design this paper describes the research on simulation procession that CNC machine manufactures special shape screw pole by use of triangle model . And both C + + and OpenGL are used .

该系统利用Visualc++6.0编写了软件人机交互界面，利用MATLAB引擎提供后台计算服务，利用SqlServer2005实现对数据的存储，并将仿真过程中部分重要参数利用TeeChart控件实现了曲线的实时显示。

The man-machine interface is built by Visual C + + 6.0 software , MATLAB engines provide backend calculation service , and the data are stored into SQL Server 2005 . Some important real-time parameters of the curve is displayed by Tee Chart .

介绍了利用MATLAB软件分析电路的方法，该方法具有简便、高效的特点，通过几个典型实例的建模、编程和仿真过程，来重点研究MATLAB软件在电工电子课程中应用。

The article introduces a method to analyze circuit by using MATLAB , this method has characteristics of simplicity and high efficiency . Through model building , programming and simulation of several typical examples , the paper mainly study the application of MATLAB in electric and electronic course .

针对计算机仿真过程中经常需要访问不同类型数据库，而利用开放式数据库连接并手动配置数据源容易出错的问题，提出了在程序中进行ODBC数据源动态配置的方法。

Towards the fallible problem of accessing different type of databases by configuring Open Database Connection ( ODBC ) data source manually during computer simulation process , the paper presents a method of ODBC data source dynamic configuration in program .

在混合PN中，连续节点被用来表示大容量库所和短时变迁，解决了传统的离散PN在仿真过程中存在的可达状态爆炸和仿真时间过长的问题。

In the hybrid PN , locations with bigger capacities and transitions with shorter operating durations are modeled by continuous nodes , which eliminates the disadvantages of state explosion and high simulation costs which traditional discrete PNs often encounter when modeling large scale manufacturing systems .

依据现场熟练技术人员的运行经验、领域专家总结的知识规律，以及经验参数，重点探讨了改进的自适应FMRAS控制算法的原理及其MATLAB仿真过程。

On the basic of operation experience of skilled staff , summary knowledge of experts and experience parameter , this paper mainly discussed the principle of improved adaptive FMRAS control algorithm and the process of matlab simulation .

给出了在该硬件平台下，基于多相滤波结构的信道化实现、基于CORDIC算法对信号瞬时特征参数提取的实现以及调制方式识别的仿真过程和实验结果。

In the hardware is given , channelized is realization with multiphase filter structure , signal feature parameters is extraction based on the CORDIC algorithm and the process of simulation and experimental results is given of modulation mode identification .

VDSL是通过双绞线实现最后传输的接入技术，因此信道环境的仿真过程，就是双绞线信道的建模过程，所以对双绞线信道的建模尤为重要。

VDSL is the connecting technology realizing the final transmission by the twisted-pair , so the simulating process of channel condition is the modeling process of twisted-pair channel , which shows that the modeling of twisted-pair channel is more important .

由于在基于Voxel模型的数控加工仿真过程中，数据量大，计算量大，显示速度慢，尚未达到实时显示，为此我们引入了并行处理技术。

Because of the tremendous amount of data and the large scale of calculation during the voxel based NC simulation process , it causes the low display velocity and poor real-time efficiency . In order to improve these impressions , we introduce the parallel processing .

建立了功率控制的仿真过程模型，对决定其性能的功率控制算法进行了研究。

In addition , the power control algorithms have been studied .

仿真过程中，采用铱星系统的网络模型结构作为仿真拓扑，进行性能评价。

Iridium constellation is adopted as the simulated network model architecture .

射击仿真过程中实体碰撞命中检测模型研究

Study on Model of Entities Collision Hitting Detection in Shooting Simulation

系统实现了仿真过程的可视化。

Three-dimensional visualization of simulation process is realized in the system .