乙炔炭黑

  • 网络ACET;DENKA BLACK
乙炔炭黑乙炔炭黑
  1. GB/T3781.4-1993乙炔炭黑ph值的测定

    Acetylene black & Determination of pH value

  2. 研究了含结晶水无机物和乙炔炭黑(CB)填充聚合物复合材料的吸波性能。

    The microwave-absorbing property of polymer filled with inorganic substance with crystal water and carbon black was examined .

  3. 用多元乳液共聚法制备了用于粘贴导静电PVC地板胶粘剂,加入乙炔炭黑赋予乳液胶粘剂导静电性能。

    Using emulsion copolymerization technique the emulsion adhesive used for static conducting PVC flooring was prepared and endued with static conductibility by introducing acetylene black .

  4. 结果发现,乙炔炭黑用于制备PTC导电复合材料具有PTC效应强、炭黑逾渗值适中、加工便利的优点;

    The results show that the acetylene black is suitable for preparing PTC composites with a good electricity conductivity .

  5. 探讨填充锆钛酸铅(PZT)压电陶瓷粉和乙炔炭黑的压电IIR阻尼性能。

    The damping property of piezoelectric IIR filled with PZT piezoelectric ceramic powder and acetylene black was investigated .

  6. 乙炔炭黑填充VMQ/EPDM共混导电橡胶的流变性能和结构分析

    Rheological Properties and Structure Analysis of VMQ / EPDM Conductive Blends Filled with Acetylene Carbon Black

  7. 为了赋予高聚合度PVC制品优良的抗静电性,添加导电炭黑(SCF)、乙炔炭黑或液体抗静电剂SP-8,确定其加工工艺。

    Conductive carbon black ( SCF ), acetylene carbon black or liquid antistatic agent SP-8 were filled into PVC products with high degree of polymerization ( DP ) to improve their antistatic property .

  8. 分别采用了填充空壳结构的导电炭黑、乙炔炭黑和抗静电剂SP8(烷基醇酰胺类)改良高聚合度聚氯乙烯(HPVC)的抗静电性。

    Filling with conductive carbon black , with hollow shell structure acetylene carbon black and antistatic agent , antistatic property of high polymerization degree PVC ( HPVC ) separately is improved .

  9. 研究了预处理短纤维用量对乙炔炭黑填充甲基乙烯基硅橡胶(VMQ)/EPDM共混硫化胶拉伸、撕裂、耐屈挠疲劳和导电性能的影响。

    The influence of the level of the pretreated short fibre on tensile strength , tear strength , flex fatigue and conductivity of the acetylene black filled VMQ / EPDM blend vulcanizate was studied .

  10. GB/T3781.8-1993乙炔炭黑盐酸吸液量的测定次氯酸盐苔黑酚试验

    Acetylene black & Determination of hydrochloric acid absorption number ate-orcinol test

  11. 乙炔炭黑制氮系统工艺改造

    The Process Improvement in Nitrogen Manufacturing System of Acetylene Carbon Black

  12. 通过在橡胶中填加乙炔炭黑的方法制成了具有优良导电性的导电橡胶。

    A good conductive rubber was made by adding ethine carbon black .

  13. 标准参比乙炔炭黑及鉴定方法

    Standard reference acetylene black and standard practice for evaluation

  14. GB/T3781.6-1993乙炔炭黑视比容的测定

    Acetylene black & Determination of apparent specific volume

  15. 对乙炔炭黑填充硅橡胶的导电性能进行研究。

    The electrically conductive properties of silicone rubber filled with acetylene black were studied .

  16. 多壁碳纳米管修饰乙炔炭黑微电极溶出伏安法测定痕量锡

    Determination of trace tin by stripping voltammetry with a multi-walled carbon nanotubes modified acetylene carbon black microelectrode

  17. 通过乙炔炭黑制氮系统的工艺改造,讨论了JH&100型制氮机应用于实际生产所采用的措施和优越性。

    Though the process improvement in nitrogen manufacturing system of acetylene Carbon black , this paper discusses the practical measures and advantage for JH-100 nitrogen making facilities .

  18. 结果表明,由乙炔炭黑用量和渗滤阈可以预测和控制导电硅橡胶的体积电阻率;

    The results showed that the volume resistivity of electrical conductive silicone rubber could be predicted and controlled by the additional level and threshold of acetylene black ;

  19. 用炭系混合填料(乙炔炭黑、石墨、碳纤维)制备了面状发热体用的在安全电压以下具有明显电发热特性的导电涂料。

    A conductive coating has been developed by use of a carbon comPOund fillers ( acetylene black , graphite and carbon fibre ), which shows evidently an electrically heating characteristics under safe voltage .

  20. 通过改变白炭黑、乙炔炭黑、过氧化二异丙苯和氧化铁的用量,以正交实验设计法对硅橡胶的导电性以及综合性能加以研究。

    Effects of the variations in loading levels of silica , acety lene black , dicumyl peroxide and ferric oxide on the conductivity and mechanical properties of silicone rubber was studied by orthogonal testing design .

  21. 探讨了测试条件对乙炔炭黑和球状镍粉水泥基复合材料压敏性的影响,发现两种复合材料的压敏性基本不受加载速率、测试电流和偏心加载的影响。

    The influence of test condition on the piezoresistivity of cement-based composites with acetylene carbon black and globate nickel powder was discussed . The piezoresistivity of these two kinds of cement-based composites is not affected by loading speed , testing current and eccentric compression . 6 .

  22. 本装置上,等离子体热解天然气制乙炔和炭黑的动力学不是由反应速度控制,而是由混合与扩散控制。

    The process of conversion of methane to nana-carbon black and acetylene via thermal Plasma is under the control of mixing and diffusion rate .

  23. 分析了热力学计算出的乙炔和炭黑与实验测定结果的差异,判明系统没有达到热力学平衡。

    A conclusion has been drawn that C-H system do not reach thermodynamic equilibrium in the present processing because of sever distort between the calculated results and experimental ones .

  24. 乙炔黑是炭黑的一种,具有炭黑的一切优良性质,用乙炔黑做电极材料,有可能制成具有较低电极电阻、制备方法简便而且成本低廉的双电层电容器。

    Acetylene Black is a kind of carbon black , so the preparation of electrode is easy too , and the production of Acetylene Black is very easy , and the price is low too .