丁基橡胶
- 网络BUTYL;Butyl Rubber;IIR
-
丁基橡胶配方实例表明,GMDH是目前较好的一种橡胶配方回归设计方法。
Its application on the IIR formulation showed it was a successful example .
-
功能填充剂对丁基橡胶吸声性能的影响
Influence of Functional Fillers on the Hydroacoustic Properties of IIR
-
中和反应后pH值对溴化丁基橡胶结构与性能的影响
Effects of pH value after neutralization on structure and properties of brominated butyl rubber
-
药用氯化丁基橡胶塞对不同pH注射剂不溶性微粒的影响
Study of Effect of Medicinal Chlorinated Butyl Rubber Stoppers on Insoluble Micro-Particles in Injections with Different pH Values
-
磺化丁基橡胶离子聚合体及其与PP或HDPE共混物的性能
Properties of sulfonated butyl rubber ionomers and their blends with PP or HDPE
-
结果:配伍溶液中不溶性微粒数量明显增多,应引起重视。药用氯化丁基橡胶塞对不同pH注射剂不溶性微粒的影响
RESULTS : The particulate matter increased obviously . Study of Effect of Medicinal Chlorinated Butyl Rubber Stoppers on Insoluble Micro-Particles in Injections with Different pH Values
-
甲苯与氯原子光氧化产生二次有机气溶胶粒子实时探测研究药用氯化丁基橡胶塞对不同pH注射剂不溶性微粒的影响
Real-time Measurement of Secondary Organic Aerosol Formation from Photooxidation Toluene and Cl Atoms Study of Effect of Medicinal Chlorinated Butyl Rubber Stoppers on Insoluble Micro-Particles in Injections with Different pH Values
-
针对ESD在丁基橡胶生产时可能出现的问题,提出了解决方案。
Some countermeasures against the problem possibly occurred in the process of the butyl rubber industrial production are presented .
-
方法:选择A、B厂家的免洗丁基橡胶输液瓶塞进行预试验,确定胶塞清洗的最少次数为1次,并选定A厂家生产的胶塞进行扩大试验。
METHODS : Pharmaceutical butyl rubber stoppers for infusion bottles produced by manufacturer A and B were se-lected and washed at least once before a preliminary test was performed . Then product A was chosen for further test .
-
以丁基橡胶为主体材料,加入增粘剂及其它助剂,研制了一种对PP、PC等非金属材料及金属材料皆有很好粘接性能的热熔胶。
Using butyl rubber as the base material , tackifier and some auxiliary additives , the butyl rubber based hot-melt adhesive was prepared for favorable adhesiveness with PP , PC and metals .
-
同时将星形支化聚合物及相应的线性聚合物进行了对比,并提出了支化剂DVB在星形支化丁基橡胶正离子反应过程中的反应机理。
The performances of star-branched butyl polymer were analysed , in comparison with line-shaped butyl polymers . The mechanism was proposed .
-
采用溶液插层法制备了丁基橡胶/有机黏土纳米复合材料,并用透射电子显微镜和X射线衍射仪研究了该纳米复合材料的形态结构。
Isobutylene-isoprene rubber ( IIR ) / organic clay nanocomposites was prepared by solution intercalation , and its morphological structure was investigated by transmission electron microscopy ( TEM ) and X-ray diffraction ( XRD ) .
-
研究了由不同动态硫化时间制备的氯化丁基橡胶(CIIR)和聚丙烯酸乙酯(PEA)共混物熔体的流变行为。
Rheological behaviors of melt chlorinated butyl rubber ( CIIR ) / polyethylacrylate ( PEA ) blends in different dynamically cured time were studied .
-
使用的原料有硅橡胶、氟橡胶、天然橡胶、氯丁橡胶、三元乙丙橡胶、丁基橡胶、聚氨脂橡胶、聚乙烯、聚丙烯、EVA、ABS、PP、PVC等。
The main materials we used are including silicone rubber , fluorubber , natural rubber , neoprene rubber , EPDM , butyl rubber , polyurethane , polyethylene , EVA , ABS , PP , and PVC .
-
采用聚丙烯酸酯(PA)为第二组分,与氯化丁基橡胶(CIIR)制备了CIIR/PA阻尼橡胶。
A series of chlorinated butyl rubber ( CIIR ) / polyacrylate ( PA ) damping rubber were prepared with PA as the second composition of the blends .
-
制备了一系列氯化丁基橡胶(CIIR)聚(甲基)丙烯酸酯(PMAc)共混复合物。
A novel blend composition was prepared based on chlorinated butyl rubber ( CIIR ) and poly ( meth ) acrylate ( PMAc ) .
-
研究了白炭黑补强溴化丁基橡胶(BIIR)的性能及特点。
The properties of brominated isobutylene-isoprene rubber ( BIIR ) reinforced with silica were studied .
-
欣闻江苏金浦集团和墨西哥KUO集团丁基橡胶合资项目,今天在南京举行签字活动。
Glad to hear of the Signing Ceremony held today in Nanjing for the NBR Joint-Venture Project between Jiangsu GPRO Group and Grupo KUO from Mexico .
-
制备了酚醛树脂硫化的丁基橡胶(IIR)/丙烯酸酯橡胶(ACM)共混物,并研究其与钢片的粘接性能。
Blends of butyl rubber ( IIR ) and acrylate rubber ( ACM ) cured with phenol-formaldehyde resin were prepared , and the adhesive property of the blends to metal were studied .
-
BF-8型丁基橡胶防水卷材
BF-8 Waterproof Rolled Sheet Made of Butyl Rubber
-
对再生丁基橡胶(RIIR)与非极性不饱和橡胶共混物的性能进行了研究。
A study was made on the properties of reclaimed butyl rubber ( RIIR ) blends with non-polar unsaturated rubber .
-
研究表明,硬脂酸钠(NaSA)改性硅酸盐空心纤维(HFS)在丁基橡胶(IIR)中可以形成良好的分散,提高了IIR的损耗因子(tanδ);
According to the results , Sodium stearate ( NaSA ) modified hollow fibrillar silicate ( HFS ) can be well dispersed in isobutylene isoprene rubber ( IIR ) and enhance the loss factor ( tan8 ) of IIR .
-
目前燕山生产的IIR1751牌号的丁基橡胶是制造子午胎内胎和无内胎轮胎不可替代的材料。
IIR1751 , which is available now is the non-replaceable material for manufacturing meridian tube and tubeless tyre .
-
结果表明,4种丁基橡胶产品的性能基本相当,IIR-1751完全可以用于生产轮胎内胎。
The results showed that the properties of 4 kinds of butyl rubber are similar , and IIR-1751 can absolutely be used to make inner tube of tyre .
-
介绍QH90室温自硫化丁基橡胶的技术特性,总结其在高温、真空、转动、巨型及水泥设备上橡胶衬里防腐蚀应用情况和施工方法。
The characteristics of QH90 selfvulcanized butyl rubber , its anticorrosion services on high temperature , vacuum , rotary and huge equipment or the equipment in cement production are introduced .
-
对IIR-268、IIR-1751、IIR-301和IIR-1675四种丁基橡胶产品的生胶性能、混炼胶加工性能、硫化胶物理机械性能及内胎应用性能进行了系列研究。
The properties of butyl rubber such as crude rubber , gross rubber processability , vulcanized mechanical property and inner tube of tyre application about IIR-268 IIR-1751 IIR-301 and IIR-1675 were studied .
-
BF-8型丁基橡胶防水卷材具有优良的耐老化、耐酸碱、耐渗透性能,可在-30~80℃温度范围内应用,冷施工,操作方便,价格较低。
BF-8 Waterproof Roiled Sheet has advantageous properties of ageing resistance , acid-alkali resistance and impermeability . It can be used within the range of - 30 ℃~ 80 ℃, cold applied , easily operated and it is low cost .
-
丁基橡胶塞炽灼残渣测定条件的比较试验
Comparative Test of Flaming Dregs Defined Conditions of Butyl Rubber Closures
-
注压硫化工艺在药用卤化丁基橡胶瓶塞中的应用
Application of Injection Molding to Pharmaceutical Closure of Halogenated Butyl Rubber
-
丁基橡胶的国内外技术现状及生产情况分析
The Technology and Manufacture of Butyl Rubber on Home and abroad