丁腈

粉末丁腈橡胶改性软质PVC的研究

Study on powder NBR modifying soft PVC

羧基丁腈橡胶包覆纳米碳酸钙的制备及其对PVC复合材料性能的影响

Influences of Carboxylated NBR ( XNBR ) Encapsulated CaCO_3 on the Mechanical Properties of PVC / nano-CaCO_3 Composite

过氧化苯甲酰、特别是偶氧二异丁腈不参加链移反应。

Benzoylperoxide , and especially azobisisobutyronitrile , do not take part in transfer reactions .

丁腈橡胶/丙烯酸酯UV固化压敏胶的研究

Study on UV curable NBR / acrylates pressure sensitive adhesive

用傅里叶变换红外（FT-IR）光谱法测定了丁腈橡胶中的结合丙烯腈含量（C（AN））。

The bound acrylonitrile ( cAN ) in NBR was determined by FT-IR spectrometry .

SiO2-PMMA杂化材料改性丁腈橡胶的研究

Study on the modification of NBR by using SiO2-PMMA hybrids material

丁腈橡胶/导电粒子复合材料的正温度系数（PTC）特性

Positive Temperature Coefficient ( PTC ) Effects of Conductive Particles / Butadiene Nitrile Rubber Composites

该方法的显著特点是，可以允许CCD中部分像元达到饱和。饱和丁腈橡胶的制备

The most distinct , characteristic is that the CCD can be used in saturation state . Preparation methods of hydrogenated nitrile rubber

BMI改性丁腈橡胶作FPC基材胶粘剂的研究与应用

Development and Application of BMI-improved Butadiene-acrylonitrile rubber used for adhesive of FPC substrate

FL对丁腈橡胶粘结磁体性能的影响

The influence of FL on NBR bonded magnet properties

改性FS对丁苯橡胶、三元乙丙橡胶、丁腈橡胶、羧基丁腈橡胶具有良好的增强效果。

Modified FS had good reinforcing effect on SBR , EPDM , NBR and CNBR .

金属活性助剂MCA对丁腈橡胶性能的影响

Effect of Metal Coagent MCA on Property of NBR

本文研究了UV（紫外光）固化胶粘剂的配方设计、制备工艺及其性能的优化，考察了纳米二氧化硅、端羟基聚丁二烯和端羟基丁腈橡胶对胶粘剂粘接性能的增韧、增强作用；

The recipe of UV-curable adhesive was designed and optimized , the influences to the properties of the gradients was studied in this paper .

丁腈橡胶/聚甲醛（POM）共混物的研究

Study on NBR / POM Blend

采用二硫代苯甲酸苄酯和偶氮二异丁腈组成的引发体系，以可逆加成-断链链转移聚合方法合成了苯甲酸乙烯酯与马来酸酐及N取代马来酰亚胺的交替共聚物。

Reversible addition-fragmentation chain transfer ( RAFT ) copolymerization of vinyl benzoate ( VBz ) with maleic anhydride ( MAn ) and N-substituted maleimides was conducted , initiated by S-benzyl dithiobenzoate / AIBN system .

氢化丁腈橡胶可耐H2S侵蚀，最高使用温度可达150℃；

Whereas hydrogenated nitrile-butadiene rubber is resistant to H 2S and can withstand a temperature as high as 150 ℃ .

安迪，始创于1990年，是一家专业生产浸胶手套的私营企业，主要产品为丁腈，天然乳胶，氯丁胶和PU手套。

Andi founded in1990 , is a privated enterprise of manufacturing working gloves , major products are Nitrile , Nature Latex , Neoprene and PU coated gloves etc.

利用X-光衍射（XRD）和透射电子显微镜（TEM）等手段考察了该法制备的粘土／丁腈橡胶纳米复合材料的微观结构，证实和描述了粘土在丁腈橡胶基体中的纳米分散结构。

When using TEM and XRD to observe and characterize the microstructure of the prepared nanocomposite , it was shown that clay layers were dispersed as nano-level in the NBR matrix .

余下的含氟丙烯酸酯单体与丙烯酸丁酯、甲基丙烯酸丁酯及丙二醇乙醚混合并加入偶氮二异丁腈，溶解后缓慢滴加入四口烧瓶中保温反应4h，制得含氟丙烯酸酯共聚物。

The rest fluorinated acrylic monomer is mixed with butyl acrylate , butyl methylacrylate and propanediol ether , and added by azobisisobutyronitrile .

主要研究了3种改性纳米碳酸钙（CCR、MCCR、MCaCO3）对丁腈胶力学性能的影响。

The mechanical properties of NBR vulcanizates filled with three kinds of modified nano-calcium carbonate , M-CaCO_3 , M-CCR and CCR were studied .

MlNi（5-x）（CoMnAl）x催化丁腈橡胶双键加氢研究

Study on hydrogention of acrylonitrile-butadiene rubber catalyzed by MlNi_ ( 5-x )( CoMnAl ) _x

新型硫化促进剂TBSI在丁腈橡胶中的应用研究

Study on Application of New Accelerator TBSI in Butadiene Acrylonitrile Rubber

液体端羧基丁腈（CTBN）增韧环氧树脂的研究

Study of Toughened Epoxy Resin by Using CTBN

介绍了金属活性助剂MCA在丁腈橡胶的高硫硫化体系，低硫硫化体系、过氧化物（DCP）硫化体系中的鉴定结果。

The paper relates the appraisal result of the metal coagent MCA in high sulfur , low sulfur and DCP curing systems of NBR .

本研究通过分子动力学模拟方法研究了不同压力对丁腈橡胶Tg的影响，同时探讨了探针半径Rp和压力对自由体积的影响。

In this paper , the effect of pressure on Tg of NBR was simulated . The influences of probe radius ( Rp ) and pressure on free volume was studied .

以偶氨二异丁腈（AIBN）作引发剂，合成了偏氯乙烯（VDC）/丙烯腈（AN）/苯乙烯（St）三元悬浮共聚树脂。

S Vinylidene chloride ( VDC ) / acrylonitrile ( AN ) / styrene ( St ) suspension terpolymer was synthesized with AIBN as initiator .

上机纺纱试验表明，其成纱条干CV值等指标与丁腈胶辊无明显差异，且简化了使用工艺，可代替丁腈-26制造纺织胶辊。

In situ test on spinning-machine showed that there are no obvious differences of yarn quality CV value between PU and NBR rollers and that made the treatment of roller more simple .

应当使用丁腈橡胶手套和安全眼镜（来操作WD-40）。

Nitrile rubber gloves and safety glasses should be used .

介绍了一种以液体端羧基丁腈橡胶（CTBN）改性环氧树脂为主体，改性聚硫橡胶为固化剂的结构胶粘剂。

In this paper , a kind of CTBN modified epoxy resin structural adhesive is introduced .

以醇水为介质，偶氮二异丁腈为引发剂、由分散聚合制得粒径5μm单分散交联聚苯乙烯（CPS）微球。

Mono - size crosslinked polystyrene microspheres ( CPS ) in average diameter of 5 ? μ m were prepared in a mixture of ethanol and water .