丁腈橡胶

  • 网络Nitrile rubber;nbr;Buna-N;Buna N;HNBR;CTBN
丁腈橡胶丁腈橡胶
  1. 丁腈橡胶与尼龙织物的粘接

    Bonding NBR to Nylon Fabric

  2. 粉末丁腈橡胶改性软质PVC的研究

    Study on powder NBR modifying soft PVC

  3. 丁腈橡胶/丙烯酸酯UV固化压敏胶的研究

    Study on UV curable NBR / acrylates pressure sensitive adhesive

  4. 用傅里叶变换红外(FT-IR)光谱法测定了丁腈橡胶中的结合丙烯腈含量(C(AN))。

    The bound acrylonitrile ( cAN ) in NBR was determined by FT-IR spectrometry .

  5. 羧基丁腈橡胶包覆纳米碳酸钙的制备及其对PVC复合材料性能的影响

    Influences of Carboxylated NBR ( XNBR ) Encapsulated CaCO_3 on the Mechanical Properties of PVC / nano-CaCO_3 Composite

  6. SiO2-PMMA杂化材料改性丁腈橡胶的研究

    Study on the modification of NBR by using SiO2-PMMA hybrids material

  7. 丁腈橡胶/导电粒子复合材料的正温度系数(PTC)特性

    Positive Temperature Coefficient ( PTC ) Effects of Conductive Particles / Butadiene Nitrile Rubber Composites

  8. 该方法的显著特点是,可以允许CCD中部分像元达到饱和。饱和丁腈橡胶的制备

    The most distinct , characteristic is that the CCD can be used in saturation state . Preparation methods of hydrogenated nitrile rubber

  9. BMI改性丁腈橡胶作FPC基材胶粘剂的研究与应用

    Development and Application of BMI-improved Butadiene-acrylonitrile rubber used for adhesive of FPC substrate

  10. FL对丁腈橡胶粘结磁体性能的影响

    The influence of FL on NBR bonded magnet properties

  11. 改性FS对丁苯橡胶、三元乙丙橡胶、丁腈橡胶、羧基丁腈橡胶具有良好的增强效果。

    Modified FS had good reinforcing effect on SBR , EPDM , NBR and CNBR .

  12. 金属活性助剂MCA对丁腈橡胶性能的影响

    Effect of Metal Coagent MCA on Property of NBR

  13. 本文研究了UV(紫外光)固化胶粘剂的配方设计、制备工艺及其性能的优化,考察了纳米二氧化硅、端羟基聚丁二烯和端羟基丁腈橡胶对胶粘剂粘接性能的增韧、增强作用;

    The recipe of UV-curable adhesive was designed and optimized , the influences to the properties of the gradients was studied in this paper .

  14. 丁腈橡胶/聚甲醛(POM)共混物的研究

    Study on NBR / POM Blend

  15. 氢化丁腈橡胶可耐H2S侵蚀,最高使用温度可达150℃;

    Whereas hydrogenated nitrile-butadiene rubber is resistant to H 2S and can withstand a temperature as high as 150 ℃ .

  16. 利用X-光衍射(XRD)和透射电子显微镜(TEM)等手段考察了该法制备的粘土/丁腈橡胶纳米复合材料的微观结构,证实和描述了粘土在丁腈橡胶基体中的纳米分散结构。

    When using TEM and XRD to observe and characterize the microstructure of the prepared nanocomposite , it was shown that clay layers were dispersed as nano-level in the NBR matrix .

  17. MlNi(5-x)(CoMnAl)x催化丁腈橡胶双键加氢研究

    Study on hydrogention of acrylonitrile-butadiene rubber catalyzed by MlNi_ ( 5-x )( CoMnAl ) _x

  18. 新型硫化促进剂TBSI在丁腈橡胶中的应用研究

    Study on Application of New Accelerator TBSI in Butadiene Acrylonitrile Rubber

  19. 介绍了金属活性助剂MCA在丁腈橡胶的高硫硫化体系,低硫硫化体系、过氧化物(DCP)硫化体系中的鉴定结果。

    The paper relates the appraisal result of the metal coagent MCA in high sulfur , low sulfur and DCP curing systems of NBR .

  20. 本研究通过分子动力学模拟方法研究了不同压力对丁腈橡胶Tg的影响,同时探讨了探针半径Rp和压力对自由体积的影响。

    In this paper , the effect of pressure on Tg of NBR was simulated . The influences of probe radius ( Rp ) and pressure on free volume was studied .

  21. 应当使用丁腈橡胶手套和安全眼镜(来操作WD-40)。

    Nitrile rubber gloves and safety glasses should be used .

  22. 介绍了一种以液体端羧基丁腈橡胶(CTBN)改性环氧树脂为主体,改性聚硫橡胶为固化剂的结构胶粘剂。

    In this paper , a kind of CTBN modified epoxy resin structural adhesive is introduced .

  23. 首先选择了液体端羟基丁腈橡胶(HTBN)增韧环氧树脂,讨论了影响增韧性能的因素,并就制备过程中的反应机理进行了探讨。

    The toughening mechanism and the influence factor of toughening effect were discussed .

  24. 研究了单轴拉伸时甲基丙烯酸镁补强丁腈橡胶的应力-应变行为.采用Gregory提出的储能函数形式,描述了甲基丙烯酸镁补强丁腈橡胶的应力-应变行为。

    Gregory 's hypothetic form for the stored energy function was adopted to study the stress strain behavior of magnesium methacrylate reinforced NBR in simple extension .

  25. 研究了各种反应条件对贮氢合金MlNi5-X(CoMnAl)X的氢化物对丁腈橡胶溶液双键加氢的影响。

    The effect of different reaction parameters on the level of hydrogenation catalyzed by hydrides forming from alloy MlNi_ ( 5-X )( CoMnAl ) _X was studied .

  26. 采用De-link断硫化剂再生丁腈橡胶密封件硫化胶毛

    Application of Devulcanizing Agent De-link Reprocessing Vulcanized Rubber Hair of NBR Seals

  27. 本文使用液体丁腈橡胶、奇士系列和EPG等三种增韧剂对单组份环氧树脂进行增韧改性。

    In this paper , the use of liquid acrylonitrile-butadiene rubber , Sunkist and EPG series of three one-component epoxy toughening agent for toughening modified .

  28. 丁腈橡胶(BUNa-N)是一种多用途抗油品腐蚀聚合物,称为腈橡胶。

    BUNa-N is a general purpose oil resistant polymer known as nitrile rubber .

  29. 结果表明,丁腈橡胶的tgδ测试段在高于参考温度以后出现,因而随着压力的增加,玻璃化温度相应升高,峰值往高频移动达大约1.5个数量级。

    The result showed that the peak of tg δ has been appeared after the reference temperature . With the increasing of the pressure , the glass transition temperature moved towards higher frequency of about 1.5 orders of magnitude .

  30. 丁腈橡胶/聚氯乙烯/受阻酚AO-60共混物的结构与性能

    Structure and properties of acrylonitrile-butadiene rubber / poly ( vinyl chloride ) / hindered phenol AO-60 blends