铸造合金

牙用镍铬烤瓷铸造合金的Ames试验研究

Study on the Ni-Cr casting alloy used for porcelain by Ames test

结果表明，磨损表面形成一层含有Al、Si、Pb、O化合物组成的反应膜，可显著地改善热挤压铸造合金的抗咬合性能；

Results indicates that a friction reactive film composed of Al , Si , Pb , O compounds and formed on the worn surface can effectively improves the anti-seizure property of hot extruded casting alloy .

Al-Si系铸造合金微观结构对疲劳寿命影响的研究进展

Effect of microstructure on Al-Si Casting Alloy in fatigue lifetime progress

热处理工艺对锶变质近共晶Al-Si铸造合金力学性能的影响

Effect of Heat Treatment on Mechanical Properties of Near-eutectic Al-Si Cast Alloys Modified With Sr

研究了Fe－C－Cr－Mn系亚稳奥氏体基耐磨铸造合金的成分与结构设计。

: The composition and structure design for the metastable austenite matrix wear resisting cast alloys of Fe - C - Cr - Mn system were investigated in this paper .

Sr对Al-Si-Mg铸造合金中Mg2Si相结晶行为影响的研究

Investigation on the Effect of Strontium on the Crystallizing Behavior of Mg_2Si Phase in Al-Si-Mg Casting Alloys

结果表明：细胞在2种Au-Ag-Pd-Cu牙科铸造合金的浸渍液中培养3d和5d后，细胞形态良好，生长旺盛；

The results show that the cell morphology is good , and the growth of cells is vigorous after the cells have been cultured and steeped in the two alloys for 3 days and 5 days .

研究了经不同变质处理后的共晶铝硅铸造合金在热处理（T6处理）过程中组织与性能的变化。

Changes of microstructure and performance of the eutectic aluminum-silicon casting alloy processed by different modifications during heat treatment process ( T6 treatment ) are studied .

Mg-Y-Zn-Zr系铸造合金热强性能的研究

The investigation on heat-resistant properties of mg-y-zn-zr system magnesium casting alloys

结果表明，经扩散退火处理的ZA-27铸造合金适用于冷挤压成型方法，制件的成品率为100%。

The result of the investigation shows that ZA27 alloy by diffusion annealing is suited for cold extrusion processing method , the proportion of finished product of the element was100 % .

研究发现，Fe-B-C铸造合金的凝固组织由硼化物、铁素体和珠光体组成，而且硼化物全部是Fe2B，显微硬度达到1430-1480HV，硼化物沿晶界呈网状分布。

The results show that the solidification structures of cast FeB-C alloy consist of pearlite , ferrite and boride ( Fe_2B ) with hardness of 1430 ~ 1480HV.Boride distributes along grain boundary in the network form .

2种牙科贵金属铸造合金的细胞毒性研究

Cytotoxicity of Two Kinds of Casting Alloys of Dental Precious Metals

消失模铸造合金钢弯管的热裂分析

An analysis of the crackle in the EPC alloy steel bend pipe

铸造合金线收缩、热裂检测系统

Linear Shrinkage & Hot Crack Detection System for Cast Alloy

不同齿科铸造合金电化学腐蚀的观测研究

The recent observation on the electrochemical corrosion of different dental casting alloys

离心铸造合金钢套筒的应用技术

Applicable Technology of Alloying Steel Sleeve in Centrifugal Casting

一种测算单晶铸造合金取向的程序及其应用

A program for determining orientations of single crystal cast alloys and its application

铸造合金动态线收缩测试装置的研究

Study on Dynamic Linear Contraction Setup for Foundry Alloys

铸造合金熔炼过程化学成分调整计算系统

A System of Chemical Composition Adjustment Calculation During Melting Processes of Cast Alloys

铸造合金优化配料原理与计算机软件开发

Fundamental of Majorization Burden and Developing of Its Computer Software for Cast Alloys

铸造合金凝固过程瞬时应力的测试

Measurements of Twinkling Stress of Casting Alloys During Solidification

钛和硼对铝镁铸造合金组织和性能的影响

Effect of Ti and B on the Structure and Properties of Al-Mg Cast Alloy

铸造合金过滤净化机理的探讨

Study on the Mechanism of Filtering Casting Alloy

熔融金属料，铁水铸造合金原理及熔炼

Hot-metal charge Principles of Cast Alloy & Melting

挤压铸造合金材料的研究进展

Progress in Alloy Materials in Squeezing Casting

铸造合金的微观组织模拟研究进展

Advances in Microstructure Simulation of Casting Alloy

目的：比较牙科用非贵金属高熔铸造合金铸造前后的金相结构。

Objective : To study the dental non-precious alloys structure before casting and after casting .

铸造合金原理及熔炼

Principles of Cast Alloy & Melting

壳型铸造合金贝氏体球铁伞齿轮工艺与材料的研究

Study on technology and material of bevel gear with alloy bainite ductile iron by shell moulding

锌铝铸造合金

Zinc - Aluminium Cast Alloys