铸钢

zhù gāng
  • cast steel
铸钢铸钢
铸钢 [zhù gāng]
  • [cast steel] 用铸造方法成形的钢,与铸铁相比,具有较高的力学性能,如强度、韧性等

铸钢[zhù gāng]
  1. 模数法计算齿轮铸钢件冒口的CAD

    Hhe application of the casting modulus method to design riser of cast steel gears

  2. CrNiMo耐磨铸钢及在锤头上的应用

    Cr Ni Mo Wear resistance Cast Steel and Application for Hammers

  3. B级铸钢侧架疲劳试验方案研讨

    Discussion on Fatigue Test Scheme for Grade B Cast Steel Side Frames

  4. 铸钢件补缩系统三次方程CAD实用化研究

    The Practicality Study on Feeding System of Steel Castings by CAD

  5. 城市轻轨PC梁铸钢支座强度分析和实验研究

    Experimental study on bearing of prestressed concrete beam for light railway

  6. 铸钢件铸造工艺工装CAD软件研究与开发

    Research and Development of CAD Software of Steel Casting Technology and Pattern Assembly

  7. 铸钢件工艺CAD通用软件的研制与应用

    The Developing and Application of the General CAD Software of Steel Castings Technology

  8. CAD在铸钢件浇注系统上的应用与研究

    The Research and Application of the CAD on the Gating Systems of Steal Castings

  9. 摩擦压力机机身铸钢件铸造工艺CAD生产总结

    The Production Summarize for Casting Technique CAD of Steel Casting of Friction Press Frame

  10. 基于UG的铸钢件浇注系统CAD二次开发

    CAD Secondary Development of Gating System for Casting Steel Based on UG

  11. 包中吹Ar可提高铸钢件质量

    Blasting Argon in The Ladle to Improve Quality of Steel Casting

  12. 含B中碳低合金铸钢及B、Al、Ti的相互作用和对冲击韧度的影响

    Effect of Impact Toughness of B , Al , Ti Content in Mid-carbon Low Alloying B Cast Steel

  13. 利用通用有限元程序ANSYS对所分析的典型铸钢节点进行研究,对节点在外荷载作用下的使用性能进行分析。

    And then service performance of cast steel joints is researched with FEM analysis program ANSYS .

  14. 铸钢件铸造工艺CAD软件的研制与应用铸造工艺CAD组件集成环境的研究

    Study and Application of Foundry Technology CAD Software for Steel Castings The Development of Component Integrated Environment on Foundry Technology Design

  15. 合适的Si含量也是影响高硅铸钢韧性重要因素。

    An appropriate Si amount is also a positive factor on the toughness of austempered high silicon cast steel .

  16. 铸造CAE技术在铸钢件中的应用

    Applications of Foundry CAE in Steel Casting

  17. 本文探讨了9Cr18MoRE不铸钢磨片的化学成份的选择原则,以及本材质的各项性能指标。

    This paper deals with the principle of selection of chemical composition for grinding-disc made of 9Cr18MoR_E stainless steel and approaches its various performance indexes .

  18. 铸钢件冒口CAD系统分为两大部分:铸钢件冒口设计和冒口绘制。

    The study mainly includes two parts , one is the design system of riser for steel casting and the other is the riser drawing system .

  19. 两相连续铸钢周期Stefan问题的古典解

    The classical solution of the continuous casting periodic Stefan problem

  20. 高锰铸钢MAG堆焊试验研究

    Study of MAG surfacing of high manganese cast steel

  21. 本文结合国家七五重点攻关科研课题《大型铸钢件铸造工艺CAD图形库》的研究,设计了一个功能齐全的SCR通用接口软件。

    Based on the research of " The casting technological CAD drawing library of large cast steel " a multifunction . SCR universal interface software is designed .

  22. Si-Mn贝氏体/马氏体耐磨铸钢等温热处理工艺及性能研究

    Study on Isothermal Quenching Process and Property of Si-Mn Bainite-Martensite Wear-resisting Cast Steel

  23. XF型铸钢覆盖剂的生产应用实践

    Application of XF Steel Casting Cover Flux in Production

  24. 马钢5000t油压机横梁铸钢件的工艺分析及生产

    Study on Foundry Technology of Upper Beam Steel Casting of 5000t Oil Press

  25. 通过对K型铸钢节点与K型钢管相贯节点的有限元分析表明,K型铸钢节点应用于结构后,节点连接不能按照相贯节点铰接假设计算,也不可按照简单刚接考虑。

    After the finite element analysis of K-type tubular joints and K-type castle steel joints , it is presented that the K-type castle steel joint can not be regarded as both hinged joint and rigid joint .

  26. 大型汽轮机用Cr-Mo-V与Cr-Mo铸钢高温性能的比较研究

    Comparative Study on High Temperature Properties of Cr-Mo-V and Cr-Mo Castings for Large Steam Turbines

  27. 研究了铸钢基体上先后沉积Ni-P化学镀层和Zn-Ni电镀层的交替叠层膜在5%NaCl溶液中的耐蚀性能。

    This study investigates a Zn-Ni / Ni-P multilayer system to increase the corrosion resistance of cast steel in 5 % NaCl solution .

  28. 结果表明:硅锰钢中加入量w为015%的稀土合金后,其铸造性能得到了改善,铸态组织细化,为发展稀土铸钢奠定了基础。

    The result shows that the casting properties of SMS ( silicon manganese steel ) are improved and the casting structure is refined greatly after adding 0.15 % of No. 1 RE alloy to SMS .

  29. 利用华铸CAE软件对大型挂舵臂铸钢件进行凝固过程的数值模拟,揭示了铸件产生缩松、缩孔的部位和形成原因。

    The origination and location of shrinkage porosity ( hole ) in the rudder horn was described by simulating the filling process of large pelagic cast-steel rudder horn using a CAE software .

  30. 分析了堆焊层的组织及性能,探讨了采用不同焊接材料进行高锰铸钢MAG焊的可行性。

    The microstructures and properties are analyzed . A reliable MAG surface processing technology for high manganes cast steel with different welding materials is studied .