装料

研究发现，通过调整装料密度与保温方式可获得较高质量的复合管。

It was found that the composite pipes with high quality can be obtained through the adjustment of feed density and heat preservation way .

CANDU6堆调试期间的物理启动和物理调试试验主要在B阶段和C阶段进行，同时也包括A阶段的堆芯装料后的临界监督。

Physical startup and physical commissioning test of CANDU 6 during commissioning are primarily performed at Phases B and C , and critical monitoring after fuel loading at PHASE A is also included .

基于Controllerlink网络的自动装料装置控制系统

Automatic Block Fetching & Loading Device Control System Based on Controller Link Network

Vb对重力式自动装料衡检定软件的开发

Develop the " Automatic Gravimetric Filling Instruments Verification " Software by Visual Basic Language

特征统计算法（CSA）在堆芯装料方案优化中的应用

Characteristic Statistic Algorithm ( CSA ) for In - Core Loading Pattern Optimization

PLC控制系统投入使用后，运行情况良好，自动控制装料，上料准确，装料速度快。

Since the PLC control system was brought into operation , it has been operating well and can control automatically burden charging with accuracy and quickness .

在发酵周期相同，装料相同的情况下，三级发酵与二级发酵比较，三级发酵阿维菌素B1的发酵单位提高10%以上，阿维菌素B1的发酵总亿提高20%以上。

The results indicated that the titer and total productivity of avermectin B1 in the trinary fermentation increased by 10 % and 20 % respectively compared with the secondary fermentation under the same conditions .

HTR-10初次临界装料预估

Prediction calculation of HTR-10 fuel loading for the first criticality

HTR-10装料前的调试

Commissioning of HTR-10 before Fueling

蒙特卡罗方法用于HTR-10首次临界燃料装料预估的校算

Application of Monte Carlo Method for Verification Calculation in Fuel Loading Prediction for First Criticality of HTR-10

这种液体包装专用料也可以代替LDPE重包装料制成重包装袋，用于包装各类材料。

This special polyolefin liquid packaging resin may replace LDPE heavyduty packaging bags and can be used for the package of all kinds of materials .

15t侧装料铝合金熔化炉

Brief a 15t Al-alloy Melting Furnace with Side Charging

10MW高温气冷堆首次装料的包覆燃料颗粒研制

Research and Development on the First-loading Coated Fuel Particles for the 10 MW High Temperature Gas-cooled Reactor

提高加热炉装料炉门使用寿命的实践护士分层次使用在NICU管理中的实践

Practice of prolonging use-life of furnace charging-gate The practice about using of nurses at different levels in the NICU

针对采用瑞士SOLO工业炉技术生产的国产底装料立式多用炉，进行了性能测试、工艺试验和典型件生产试验。

The bell-type furnace from SOLO Switzerland has been made in China successfully , the different tests in its performance , process examination and production test of typical parts were carried out .

DXD系列液体包装机装料部分装配建议

The Assembling Suggestion about Loading Parts of Series of DXD Liquid Packaging Machine

通过该编译器，可直接编译生成底层CPU需用的hex格式的机器码文件。最后以装料小车控制案例，对本文设计的PLC进行功能测试。

The compiler can directly generate the hex-format machine language file that is needed by bottom-level CPU . Finally , we test the functioning of the designed PLC with the example of controlling a loading car .

相关的绝缘装料管，通常用多铝红柱石制成，这个可以将产物和TDB管隔离开来。

An electrically insulative load tube , usually made of mullite , can be used to isolate the product from the TDB .

研究了桨型、装料高度、桨叶位置及桨叶直径对KLa的影响。

The effects of type , diameter , and position of agitator , depth of liquid on the KLa coefficient were investigated .

WZ-C无料钟炉顶装料设备优化改进

Optimization and Modification of WZ-C Bell-less Top Charging Equipment

本文首先通过对火车装料时扬尘的扩散状况，以及某筛贮焦楼火车装焦现有通风除尘系统的控制效果进行CFD模拟分析，确定了课题中侧吸罩加四周挡风装置的尘源控制方案。

After simulation analysis on the dust diffusion and the control effects of the existing ventilation and dust removal system , this paper put forward side suction hood and around windshield device ventilation method to control the dust diffusion of dust source .

本文简要介绍了HTR-10的系统划分及调试项目的设计原则，并重点介绍了第一阶段装料前冷态调试试验的内容及结果以及对调试不符合项的处理办法。

This paper introduces systems of HTR 10 and principle of test items planning , especially introduces contents and results of some main test before first fueling , and nonconformance handling .

高炉装料设备用D-298焊条的研制

Development of d-298 electrode for blast furnace charging equipment

合适的工艺条件：浆料比1.3∶1、黑曲霉接种量2%、装料量25g、自然pH值、发酵温度30~33℃、发酵周期5d。

The appropriate technological conditions were : pulp-material ratio 1.3 ∶ 1 , grafting amount of aspergillus niger 2 % , material loading 25 g , natural pH value , fermentation temperature 30 ~ 33 ℃, fermentation cycle 5 d.

结果表明，SCYCLE程序在求解装料优化问题方面具有很高的搜索效率和很好的全局性。

It is shown that SCYCLE has high efficiency and good global performance on this problem .

方法：通过单因素试验，初步考察了初始含水量、pH值、装料量、接种量、种龄、补水方式、培养时间和培养温度8个因素对红曲霉荞麦固态发酵产monacolink的影响。

Methods : Through single-factor test , the effects of initial water content , initial pH , filling quantity , inoculum size , age of seed , methods of additional water , culture time and culture temperature on Monacolin K yield by Monascus solid-state fermentation were primarily discussed .

研究了200MW核供热堆（NHR-200）初始堆芯装料的可燃毒物配置的最优化问题。

The optimization of the burnable poison disposition in the initial core loading of the 200 MW nuclear heating reactor ( NHR-200 ), is studied .

在冷料入炉条件下生产装料级铬铁产量增加约30%，单位电耗为2270kwh／t

Output was increased around 30 % and the unit power consumption was 2270kWh / t on conditon with cool charge to produce charge FeCr

本文依照研究堆的核安全法规和导则，并根据HTR-10的安全特性，完成了HTR-10应急计划的制定、应急准备及装料前的场内综合应急演习等工作，保证了HTR-10在2000年建成并达到临界。

Based on the codes on the safety of research reactors and the safety features of HTR-10 , the emergency plan has been developed and exercises on the preparedness and emergency response has been conducted before the first loading of fuel on HTR-10 .

作者介绍了一台工作空间2400×1600×600mm、最大装料量4t的全液压传动电液压清砂设备的用途、特点、主要技术参数及设备的组成情况。

An introduction is made to the uses , distinguishing features , main technical parameters and formation of a full hydraulic transmission electro-hydraulic cleaning equipment which has a working space of 2400x1600 × 600mm and a maximum charg - ing volume of 4t .