聚合工艺

BF3催化C8~C（13）混合烯烃的聚合工艺

Polymerization Process of C_8 ~ C_ ( 13 ) Alpha-Olefins Catalyzed by Boron Trifluoride

聚合工艺对纳米SiO2在原位乳液聚合中分散性的影响

Influence of in-situ emulsion polymerization process for dispersivity of nano-SiO_2

PET连续聚合工艺流程优化改造

Innovation and optimization of technological process of PET continuous polymerization

试验中对C5石油树脂的聚合工艺、催化剂的失活和脱除及C5石油树脂的精制等工艺条件进行了研究。

This paper also deals with technological conditions for washing and separating of the catalyst , refining and analysing for C_5 petroleum resin .

创新地利用原位生成聚合工艺，成功聚合出具备抗紫外功能的纳米TiO2／PET复合树脂。

The anti-UV functional composite resin has been polymerized successfully .

聚合工艺条件对PS分子量的影响

The Influence of Polymerization Condition on Polystyrene Molecular Weight

大庆SAN装置聚合工艺过程分析

Daqing SAN plant polymerization process analysis

VAc为第二单体的PAN溶液聚合工艺研究

Discussion on Process of PAN Solution Polymerization with VAc as Second Monomer

用凝胶渗透色谱（GPC）、红外、核磁对产物进行表征，并探讨了合成该嵌段共聚物的聚合工艺。

The products is Characterized by gel permeation chromatography ( GPC ), IR and 1H-NMR .

综述了高表观密度聚氯乙烯（PVC）建材专用树脂的主要聚合工艺，并给出了若干聚合配方实例。

In this paper , main polymerization technology of high bulk density PVC resin was reviewed , then some polymerization recipes were given .

应用正交实验及SPSS统计软件研究聚乳酸-己内酯直接熔融聚合工艺。

The direct melt polymerization of poly ( lactic acid-co-caprolactone ) was studied by orthogonal experiment and SPSS software .

聚合物光纤用P（3FEM）聚合工艺

Polymerization process of p ( 3fem ) applied to polymer optical fiber

采用单釜连续聚合工艺合成出了固含量45%，粘度为5900mPa·s（25℃）的POP。

POP product with 45 % solid content and 5 900mPa · s ( 25 ℃) viscosity was synthesized by one-reactor continuous process .

C6H（14）-CH2Cl2溶剂中异丁烯聚合工艺研究

Investigation of isobutene polymerization process in C_6H_ ( 14 ) - CH _2Cl_2 complex solvents

分析探讨了采用减压后聚合工艺生产PA6的可行性及实施效果。

Both the feasibility and the processing result of vacuum polymerization finishing process for PA6 fiber were discussed .

结果表明，聚合工艺对AMPS乳液的聚合稳定性有较大影响；

It is found that the polymerization process has a great effect on the polymerization stability .

聚合工艺控制参数如催化剂颗粒的粒径、聚合反应温度、聚合物浆液的平均停留时间等的波动，会导致PP粒度分布变宽而引起下游工艺系统的堵塞。

The influence factors of PP particle size distribution , such as catalyst particle size , polymerization temperature and mean residence time of polymer slurry , were analyzed .

TPU连续聚合工艺及设备

Continuous polymerization technology and equipment of TPU

试验结果表明，聚合工艺及AMPS的用量对乳液的聚合稳定性有较大影响。

It has shown that the polymerization process and amount of AMPS affect the polymerization stability greatly .

以磷酸二氢铵和尿素为原料，用微波反应器和马弗炉分别研究聚磷酸铵（APP）的聚合工艺条件。

The polymerization conditions of ammonium polyphosphate ( APP ) were studied by microwave reactor and muffle furnace respectively with ammonium dihydrogen phosphate and urea as raw materials .

实验结果表明：采用单釜连续聚合工艺能使POP产品分散相粒子粒径分布比较宽，从而能有效降低高固含POP粘度。

Experiment results showed that broader distribution of particle diameter was gained by one-reactor continuous process than by batch process , and POP viscosity by one-reactor continuous process was lower .

对溶液法聚乙烯（PE）工艺的特点进行了描述，介绍了近几年溶液法PE技术在催化剂、聚合工艺和设备方面的进展。

This paper described the characteristics of solution polymerization polyethylene ( PE ) process and briefly introduced the recent years ' advances in catalyst , technology and equipment of the solution polymerization PE .

研究了温度、时间和纳米TiO2的加入对单体转化率的影响，确定了聚合工艺。

Effect of polymerization temperature , time and the affixion of TiO_2 nanoparticles on conversion of monomers was studied , and polymerization techniques were confirmed .

介绍了乙烯&乙酸乙烯酯（EVM）共聚合物的聚合工艺、性能及应用。

Introduced the polymerization craft , performance and application of ethylene-vinyl acetate ( EVM ) copolymer .

通过对淤浆法HDPE装置间歇聚合工艺条件及程序的研究，提出了优化措施，并取得了良好的效果。

Through the investigation to process conditions and procedure of batch-type polymerization with slurry in HDPE plant , optimization measures were worked out and good result was achieved .

20世纪SSBR合成技术进展Ⅱ.聚合工艺及工程设备的开发

Progress of SSBR synthetic technology in the 20th century ⅱ . Development of polymerization process and engineering apparatus

综述了可熔性聚四氟乙烯（PFA）的聚合工艺、后处理工艺、不稳定端基处理工艺、晶核尺寸的控制方法。

Polymerization process , after-treatment process , after-treatment of unstable end-group , control method for crystalline core size are reviewed .

采用种子乳液聚合工艺合成纯丙乳液，并以其为成膜物质配制低VOC乳胶涂料。

Acrylate emulsion was synthesized by seeded emulsion polymerization , and it was taken as film forming matter to prepare latex coating with low VOC .

采用半连续乳液聚合工艺，在十二烷基硫酸钠（SDS）/壬基酚聚氧乙烯醚（NP-10）复合乳化体系，合成了有机硅改性丙烯酸酯共聚乳液。

A copolymerization latex based on organosilicon-modified acrylate was synthesized by semi-continuous emulsion polymerization , which used SDS / NP-10 as compound emulsifier .

通过预乳化乳液聚合工艺，合成了含官能团单体双丙酮丙烯酰胺（DAAM）、丙烯酰胺、N-甲基丙烯酰胺（NMA）的自交联丙烯酸酯乳液。

The self-crosslinking acrylate latex contained functional monomer DAAM 、 acrylamide and NMA through pre-emulsification polymerization process was prepared .