旋转成型

塑料旋转成型的特点与研究

Characteristics and study of rotational molding of plastics

介绍旋转成型模具设计原理，模具壁厚的确定和模具材料的选用。

This paper mainly introduces the design principles of the rotational molding mould , the determination of mould wall thickness and the choosing of mould material .

PE电缆、管材、旋转成型专用料市场动向

Market trends of PE cable pipe and rotoforming specially used material

研究了旋转成型浆液用料聚丙烯（PP）／羧甲基纤维素（CMC）体系的热失重行为和成膜行为。

Film formation of PP / CMC aqueous slurry for rotational molding was investigated .

旋转成型PP／CMC体系的热失重行为和成膜行为研究

Study on Film Formation and Thermal Stability of PP / CMC Aqueous Slurry for Rotational Moulding

LLDPE旋转成型技术及其在防腐蚀工程中的应用

LLDPE rotational forming technique and its application in anticorrosive engineering

旋转成型用短GF/PP复合材料的CMC浆液稳定性的研究

Stability of CMC Aqueous Slurry for the Rotational Moulding of Short GF / PP Composites

研究了以粉状聚丙烯（PP）为原料、以羧甲基纤维素（CMC）为稳定剂的旋转成型用水性浆液料的干燥行为。

The investigation of the drying behavior of the aqueous slurry of powdered polypropylene ( PP ) using sodium carboxymethylcellulose ( CMC ) as a suspension stabilizer during heating process in rotational moulding was carried out .

叙述了聚全氟乙烯（FEP）树脂的压缩、注射、真空、传递和旋转成型的原理、方法、工艺和设备。

Principle , method and equipment of compression , injection , vacuum , transmission and rotatory molding for fluorinated ethylene-propylene ( FEP ) are reviewed .

通过对旋转成型专用料性能的分析，确定了专用料DNDA－7144的性能指标和开发工艺技术路线及操作条件，并在LLDPE装置中试成功。

The technical properties and process development and conditions of special resin DNDA-7144 are determined through analysis Of the property of rotary forming special resin , and is successful in LLDPE pilot plant test .

旋转成型专用料DNDA-7144的开发

Development of Rotary Forming Special Resin DNDA-7144

铸型转速为695r/min，铸型壁厚为气缸套大端厚度的1.2倍，浇注速度20～40kg/s，旋转成型时间30min。

The rotation speed of the mould is 695 r / min , thickness of the mould wall is 1.2 time of the maximum thickness of the casting , pouring rate is 20 ~ 40 kg / s , mould turning time 30 min.

旋转成型工艺在防腐蚀领域中的应用

The Application of the Circle Forming Technology in Anticorrosion Industry

旋转成型制品的质量保证对策

The Quality Defect of Rotational Molding and its Control Countermeasure

聚丙烯旋转成型用聚乙烯醇浆液料稳定性的研究

Stability of the PVA Aqueous Slurry for the Rotational Moulding of Polypropylene

塑料制品的旋转成型技术及其发展

Production Technology and Development of Rotational Molding for Plastic Products

用旋转成型技术为金属中空制品内衬塑料

Lining Metal Hollow Products with Plastics by Rotational Moulding

塑料旋转成型用原料的特点、品种和发展

Characteristics , Assortment and Development of the Raw Materials of the Rotational Moulding of Plastics

聚丙烯旋转成型浆液料粘结和干燥工艺研究

Study on Sticking and Drying Process of Aqueous Slurry of Powder PP for Rotational Moulding

填充聚合物的旋转成型

The rotational moulding of filled polymers

酚醛树脂磨具成型料松散性研究聚丙烯旋转成型浆液料的干燥行为

Investigation of the drying behavior of the aqueous slurry of powdered PP for the rotational moulding

改进了以浆液料作为旋转成型的物料，用于制备短玻璃纤维增强聚丙烯复合材料的新工艺。

An aqueous slurry was developed as a sort of raw materials in rotational moulding for the preparation of short glass fiber reinforced polypropylene composites .

根据自动建模的程序流程，实现了轴主体部分和键槽特征的草绘、轴主体部分旋转成型以及键槽特征的拉伸成型。

Subsequently this thesis narrated in detailed the method that sketched the axis main body and the keyway and created the features of revolve , chamfer and extrude .

沥青稳定碎石基层旋转压实成型参数的试验研究

Experiment and Study on Gyratory Compacting Parameters of Asphalt Treated Base

旋转模塑成型长纤维增强树脂基复合材料制品研究

Rotational Moulding for Product Made from Long Fiber Reinforced Resin Matrix Composites

长纤维增强液态反应性树脂复合材料旋转模塑成型工艺气泡形成机理试验分析

Study on the Mechanism of Void Formation in Roto-moulding of Long-fiber Reinforced Resin

橡胶螺杆旋转注射成型方法的试验研究

Experimental Study on Screw Rotating Injection Molding for Rubber

聚乙烯旋转模塑成型工艺条件的研究

Study on Process Conditions of Polyethylene Rotational Molding

卡车翼子板旋转模塑成型实验制品设计

Experiment Part Design OF Truck Fender Rotationally Molded

作者提出了突破传统观念的螺杆旋转注射成型方法。

A screw rotating injection molding method which breaks through the traditional viewpoint was put forward by the authors .