玻壳
- glass bulb
-
基于逆向工程的显像管玻壳模CAD建模
Reverse engineering-based CAD modeling of die for kino lamp glass bulb
-
玻壳检验可重构控制系统的实现
The Realization of Reconfigurable Control System in Glass Bulb Checking System
-
玻壳锥成型末端设备的PLC控制
The Control of Programmable Controller at the End Equipment in Taper Line
-
玻壳成型PLC冗余自控系统的设计
Design of a PLC based redundant automation system for glass panel forming
-
制作U形玻壳的一种有效方案
An Efficient Program for Producing U Shaped Glass Tube
-
CAE技术在玻壳成形冷却过程中的应用
Application of CAE Technology in Studying the Cooling Process in the Forming Stage of CPT Bulk
-
CPT玻壳在加热排气过程中温度应力的有限元法分析
Finite Element Analysis of Temperature Stresses for CPT Bulb Being Exhausted
-
本文提出了一种有效的生产U形玻壳的工艺方案,以满足紧凑型荧光灯发展的要求。
Abstract To satisfy the requirment for developing twin U compact fluorescent lamps , an efficient program of producing technique is suggested .
-
介绍了用由面阵CCD组成的单列阵扫描法测量大型显像管玻壳模具的表面裂纹和砂眼等缺陷。
A measuring method of the surface defects for the large model of the monitor tube , by scanning with planar CCD array is presented .
-
以废弃彩色CRT玻壳的屏锥分离工艺为例,采用权重总和计分评价法对备选工艺进行评价,取得较满意的效果。
Also , panel-funnel separating techniques of end-of-life color CRT glass are assessed and sequenced as a case study .
-
废旧阴极射线管(CRT)显示器玻壳进入土壤后铅的释放及转化
Release and Transform of Lead from the Glass of Cathode Ray Tube ( CRT ) Following Its Entrance in the Soil
-
从硬件配置到软件设计两个方面进行了论述,介绍了OMRON的PLC产品在玻壳生产线上的应用。
The paper expounds the use of OMRON 'S PLC products in the glass shell production line , and discusses problems from hardware allocation to software design .
-
本产品主电路采用IGBT器件,从根本上格新了以玻壳电子管为特征的老一代高频设备。
The product host circuit has adopt the IGBT component , has complied with fundamental lattice new being old characteristic generation high frequency equipment with shell electron tube Bo .
-
56cm彩色显像管玻壳应力计算与分析
Stress calculation and analysis of glass shell of 56 cm color kinescope
-
由于大功率激光被充满D-T气体的玻壳靶均匀吸收,并把D-T气体作为理想气体处理。
Giant pulse laser energe is absorbed uniformly by the shell of glass pellet filled with D-T gas . D-T gas is taken as the perfect gas here .
-
ACBC公司是一家以生产彩色显像管玻壳和彩色显示器玻壳为主的大型企业集团。
ACBC company is a large-scale enterprise group taking color picture tube blub and color display tube blub as main fact .
-
针对玻壳图像中缺陷的特征,采用Kirsch梯度算子法对图像进行处理,取得了理想的效果,可识别出玻壳缺陷。
In view of the image characteristics of the defect , the Kirsch gradient operator is used in image processing . A ideal result is received and the defect of glass shell can be identified .
-
玻壳模具温度场及变形的边界元分析液氮温度下JX-6型椰壳炭的性能测试
BEM Research on Cooling and Deforming of the Glass Panel Mold ; The test for the capability of the coconut shell charcoal ( JX-6 ), under the temperature of liquid nitrogen
-
为估计一种基于线性可变差动传感器(LVDT)玻壳测试系统的质量,用最小二乘法对测试曲面进行球面拟合,得到相对应的玻壳曲面。
In order to test a glass-shell measurement based on the Linear Variable Differential Transformer ( LVDT ), the sphere surface fitting is done with least square approximation , and its corresponding square surface is founded with its radius of curvature .
-
采用区域标号算法对玻壳图象中的多目标区域进行划分,实现多个目标区域的识别。
Region labeling is presented and can differentiate multiple target regions .
-
彩色显像管玻壳的高温应力测试技术
High temperature stress measurement technique for colour teletron in exhaust oven
-
玻壳成品的引爆试验完全符合对壳体所作的理论分析。
Theoretical analysis coincides with the results of the UL test .
-
等离子喷涂技术在彩色显像管玻壳模具上的应用
Application of Plasma Spraying Technology in Color Picture Tube 's Mold
-
彩色显像管玻壳屏裙部炸裂的原因分析
Analysis of the Reason for CPT Bulb Cracking in the Screen Skirt
-
玻壳成型过程诱导残余应力的数值预测
Numerical Prediction of Process-Induced Residual Stresses in Glass Bulb Panel
-
安玻建成中国现代化彩色玻壳工业基地
Anbo completes construction of China 's modern , colored glass-shell industrial base
-
含裂纹缺陷显像管玻壳体安全性计算分析
Safety calculation and analysis of the CPT bulb with the crack defects
-
玻壳局部缺陷检测方法的研究
A Method of Local Threshold Segmentation in the Detection of Glass-bulb Defect
-
显像管玻壳铅尘污染特性的研究
Study on Pollution Characteristics of Lead Dust of Glass Shell of Kinescope
-
玻壳模具镀金工艺及镀层性能研究
Gold plating Technique and Coating Performance of Glass Shell Mould