活塞缸

  • 网络Piston Cylinder
活塞缸活塞缸
  1. 水泵转轮体活塞缸裂纹成因分析及处理

    The water pump transfers piston cylinder crack origin analysis and processing

  2. 介绍了斜面-钢球-斜面-钢球三级力放大机构与无杆活塞缸组成的液压-机械集成传动系统,并给出了其输出力和增力系数的计算公式。

    Wedge-steel ball-wedge-steel ball three classes force amplificatory structure and hydraulic-mechanic transmission integrated system constituted by shank-less piston cylinder were introduced . The formula about output forces and amplificatory coefficient was worked out .

  3. 该文利用ANSYS软件,对活塞缸进行了力学分析;并根据计算结果,对由活塞缸引起的引信失效原因进行了详细的分析。

    The mechanics analysis is done on the piston jar with the ANSYS software , and the reasons of the fuze failure caused by the piston jar are analyzed in more detail based on calculation results .

  4. 准流体保险机构的活塞缸有限元分析

    FEM Analysis of Piston Jar of the Quasi-fluid Safety Mechanism

  5. 双活塞缸式气动真空发生系统的建模与仿真

    Modeling and Simulation of Pneumatic Vacuum System with Two Cylinders

  6. 准流体引信保险机构活塞缸优化设计

    An Optimization Design of Piston Jar of the Quasi-fluid Fuze

  7. 双活塞缸砂浆泵补偿机构设计和运行理论分析

    Analysis of Designing and Operating for Mortar Pump compensative Mechanism

  8. 在活塞缸的下端设有缺口。

    A nick is arranged on the lower end of a piston vat .

  9. 基于三级力放大机构与无杆活塞缸的液压-机械集成传动系统

    Hydraulic-mechanic Transmission Integrated System Based on Three Classes Force Amplificatory Structure and Shank-less Piston Cylinder

  10. 基于无杆活塞缸与机械增力机构的气动夹具

    Air-powered Clamping Device Driven by the Air Cylinder with Rod-less Piston and Mechanical Force Amplifier

  11. 在液流惯性阻力未知的情况下解决了速关阀关闭时间问题。即速关阀关闭的时间即为活塞缸中液体油完全排出的时间。

    The closing time of quick closing valve is the time that oil completely flows out of the piston vat .

  12. 活塞缸是准流体保险机构中重要的机械零件,其力学性能对引信功能的影响非常大。

    Piston jar is the important part of the quasi fluid safety mechanism . Its mechanics property affects the fuze 's function greatly .

  13. 基于无杆活塞缸的液压&机械复合传动装置研究旋转阀控差动缸式液压激振器仿真与实验研究

    The Study of the Hydro-Mechanism Composite Transmission Device Base on Rod-Less Piston Hydraulic Cylinder ; Simulation and Experimental Research on a Hydraulic Exciter with Rotating Valve Control Differential Effect Cylinder

  14. 活塞缸是火炮动态后坐装置中的关键部件,其结构强度设计是整个实验装置强度设计的核心。

    The piston vat is a key component of gun 's dynamic recoil mechanism , therefore , its intensity design will be the most important thing in the process of designing intensity for the whole testing mechanism .

  15. 陶瓷发动机无环活塞和缸套间漏气量的理论和试验研究

    Gas Leakage between Ringless Piston and Liner of Ceramic Engine

  16. 汽油机活塞敲缸响的力学分析

    The Mechanics Analysis of the Abnormal Noise of Piston in Petrol Engine

  17. 声发射技术用于诊断发动机活塞与缸套间磨损故障的实验研究

    Experimental study on engine piston-liner wear fault diagnosis by acoustic emission technology

  18. 发动机活塞捣缸故障的诊断分析

    Analysis of engine trouble in which a piston colliding with a cylinder

  19. 小型风冷柴油机采用双金属气缸套防止活塞咬缸

    Application of Bimetallic Liners to Prevent the Piston Seizure in an Air-cooled Diesel Engine

  20. 汽车发动机活塞敲缸探析

    Analysis of the Automotive Engine Piston Knocking

  21. 柴油机活塞敲缸故障分析

    Failure analysis of piston of diesel engine

  22. 活塞敲缸故障的诊断研究

    Diagnosis Research on Piston liner Breakdown

  23. 基于无杆活塞液压缸与对称型斜面-钢球-斜面二次增力机构的复合传动系统

    Compound drive system of two-step force amplifier composed of inclined planes and steel-balls which is based on fluid cylinder and symmetric mode

  24. 结果表明,采用耦合传热方法模拟活塞-缸套间的传热可以大大简化边界条件,同时使传热过程的模拟更加符合实际工作状态。

    Simulation of heat transfer of piston-cylinder liner using the coupled method simplifies the boundary conditions and accords with the actual working mode .

  25. 在工程中经常出现破碎的小阀片等异物掉入往复活塞式压缩机气缸内造成活塞撞缸的问题。

    The case that the small valve pieces drop into cylinder of reciprocating compressor is often occurred in engineering , then the cylinder is impacted by piston .

  26. 介绍了双活塞液压缸的研制及应用,与单活塞液压缸相比,它具有动作快速、灵活等优点,特别适合在需要快速提供强大推力或拉力的场合。

    Compared to single piston cylinder , it features fast action and flexibility , specially used when large thrust force or tensile force is required within short time .

  27. 定期在活塞与缸套间及其他活动件之间涂润滑脂,以防粘结、锈蚀而造成安全阀失灵和工作性能不稳定。

    Apply grease periodically between piston and cylinder , and between other moving parts to avoid failure and unstable operation performance in the safety valve due to sticking or rusting .

  28. 扼要地论述YGZ70型独立回转凿岩机冲击部分采用无阀配气结构的优点,活塞在缸体内运动的三个阶段的工作原理;

    This is a brief description of the advantages of the valveless air distribution mechanism adopted in the impact component , and the working principle of the three stages of piston movements in the cylinder .

  29. 若是因润滑、磨损、部分机件损伤或损坏而造成的异响如活塞敲缸、大小瓦响等无法进行自行调整的,要及时安排进修理车间、解体修理。

    If you wear and lubrication , due to injury or damage mechanism parts and knock louder as : the piston cylinder , size tiles ring etc can adjust , arranging repair shop and disintegration in repair .

  30. 根据功率匹配原则,讨论了阀控非对称动力机构(阀控单活塞杆液压缸)的负载压力pL和负载流量QL,以供对其静动态特性研究及优化设计作参考。

    This paper discusses , according to power matching rule , the load pressure P_L and flow capacity Q_L of valve-control asymmetric actuating unit , which offers a reference to study on its kinematics and dynamic characteristics and optimum design .