注塑制品
- 网络injection molding products;injection products
-
对于厚壁注塑制品,不均匀收缩是成型加工中的主要缺陷之一。
For thick-walled injection molding products , non-uniform thickness due to uneven shrinkage is a major flaw .
-
介绍了PC/ABS塑料合金注塑制品缺陷产生的原因及规律,其中包括缩孔、熔接线、银纹,翘曲变形等,从模具结构,成型工艺等方面,列举了避免缺陷的措施。
It introduces the defect cause and pattern produced in the PC / ABS plastic alloy injection molding products including shrinkage cavity , weld linc , silver streak and warpage . The guarding measures against defects was listed in mold structure , molding technology .
-
K料注塑制品的常见缺陷和解决办法
Common faults of injection products of K materials and their solutions
-
PC注塑制品常见缺陷分析及解决方法
Analysis of common defects in the injected PC products and their solving methods
-
ABS注塑制品的模内蠕变试验研究
Test and Study on In-Mold Creep of ABS Injection Molded Part
-
工艺参数对注塑制品翘曲影响的CAE分析
CAE analysis of the effect of process parameter on Warpage of injection molding part
-
基于CAE的塑料注塑制品强度设计
CAE-based Strength Design of Injection Molded Parts
-
另外,也研究了模温和熔体压力对PS注塑制品的影响。
In addition , the influence of molding temperature and injection pressure on PS product was discussed , too .
-
作为注塑模智能CAD系统的一个重要组成部分,本系统旨在实现对任一常见注塑制品脱模方式的智能化推断及相应脱模机构三维实体模型的自动生成。
Its aim is to realize the intelligent selection for ejecting way of any common plastic product and automatic generation for the according 3D model of ejection system .
-
采用溶剂浸渍法和恒定应变四点弯曲方法研究了HDPE注塑制品的ESC行为。
2 , Using Solvent immersion method and constant strain four-point bending method research the ESC behavior of HDPE injection molded parts .
-
经过对力学性能的综合考虑,建议PP平板状注塑制品的最佳型腔表面平均温度为55~65℃,PS为45~55℃。
Synthetically considered the mechanical properties of injection slab , 55 ~ 65 ℃ was recommended as the optimum average surface temperature of mould profile , PS was 45 ~ 55 ℃ .
-
考虑到短纤维在注塑制品中分布的随机性,Tandon-Weng模型还不能反映出纤维的微观分布状态,无法给出相应的等效的均匀分布模型。
Considering the distribution random for short-fiber in injection modeling products , Tandon-Weng model could not reflect the microscopic distribution for short-fiber and could not accordingly provide uniform distribution model .
-
巧用浇口解决注塑制品成型缺陷
Skillfully using the runner to solve defect of injection molding products
-
注塑制品设计专家系统开发及应用前景
Expert System for Plastics Product Design and Prospects of Its Application
-
基于神经网络的注塑制品材料选择方法
A neural network approach to material selection for injection molded parts
-
工艺参数对注塑制品质量的影响研究
Influence of Processing Parameter on Quality of Plastic Injection Molded Parts
-
提高注塑制品尺寸精度的有效途径
Effective Approaches for Increasing the Dimension Precision of Injection Plastic Produce
-
长玻璃纤维/聚丙烯复合材料粒料注塑制品的拉伸强度
Tensile properties of injection molded long glass fiber reinforced polypropylene parts
-
分析微注塑制品形态结构的一些特殊现象。
Some special phenomenon in the analysis of micro injection parts morphology .
-
注塑制品的变形影响产品的最终形状和尺寸精度。
The deflection of injection products influences final shape and dimensional precision .
-
大型注塑制品熔接痕分析及解决对策
Analysis and Countermeasure of Weld Line of Large Injection-moulded Product
-
基于图像处理的注塑制品缺陷检测方法研究
Research on Injection Molding Product Defects Detection Method Based on Image Processing
-
影响长纤维增强热塑性塑料注塑制品中纤维长度的主要因素
Main Factors Influencing the Fiber Length of Injection Molded Long-fiber Thermoplastic Products
-
基于改进主动轮廓模型的注塑制品轮廓提取
Injection molding product edge extraction using improved active contour model
-
并针对注塑制品的特点,提出了一种基于特征的三角形网格简化算法。
A triangular mesh simplification algorithm with geometric feature recognition is presented .
-
论文设计出适合于注塑制品缺陷分析诊断的专家系统结构。
The thesis devises advanced expert system to solve the injection defect .
-
注塑制品常见的质量缺陷分析
An analysis on common quality defect of injected plastic products
-
浇注系统对注塑制品质量的影响及其优化设计
Effect of the pouring system on injection-molded products and its optimal design
-
注塑制品的瞬态温度场分析
An Analysis o the Trasient Temperature Field of Injection Part
-
带镀银嵌件尼龙1010注塑制品的加工
Processing of nylon 1010 injection molding product with silvered insert