恒温槽
- 网络thermostatic bath;thermostat bath;oven;waterbath
-
OCXO恒温槽温度控制系统控制方法研究
Research of control mean on temperature control system on OCXO oven
-
振荡控温式恒温槽的缩减因数
The Reducing Factor of the Oven Controlled by an Oscillating Circuit
-
我们可将一个盛水的密闭容器置于恒温槽内。
We might put a sealed container of water in a constant-temperature bath .
-
基于模糊PID控制的高精度恒温槽设计
Design of Precision Thermostat Bath Based on Fuzzy-PID Control
-
制冷工质PVT实验用精密低温恒温槽的研制
The Development of Precise Low-temperature Thermostat for PVT Measurement of Refrigerants
-
在频率稳定性方面,对恒温槽的热学模型和PID算法进行了研究,通过理论学习和试验,找到了改进恒温槽性能的方法。
In order to optimize the stability of frequency , thermal model of OCXO was studied . Through theoretical analysis and experimental , method to improve temperature performance of OCXO was found .
-
介绍了一套自行研制的制冷工质PVT实验用精密低温恒温槽。
In this paper , a precise low temperature thermostat is developed for PVT measurement of refrigerants .
-
通过对实验数据的研究和分析表明恒温槽内温度的控制精度小于±0.1℃,证明本文中所使用的模糊PID控制算法和恒温槽系统设计的合理性和有效性。
The experiment data shows the temperature accuracy is less than ± 0.1 ℃, which proves the rationality and the validity of the fuzzy-PID control arithmetic and the thermostat bath control system design .
-
对恒温槽的设计方法做了概括和分类。从理论上对振荡器设计中的相位噪声、振荡器的Lesson模型、各种振荡电路进行了较为深入的研究。
Secondly , the paper has summarized and classified the design methods of thermostat bath and has done a thorough theoretical study on phase noise in oscillator design , Lesson oscillator model and a variety circuit of oscillator .
-
流体热物性测试用全自动高精度恒温槽的研制
High precision automatic thermostat bath for measurement of fluid thermophysical properties
-
恒温槽温度补偿的晶体振荡器研制
The Development for Crystal Oscillator with Temperature Compensation of Constant Temperature Groove
-
有源负载恒温槽性能分析
An Analysis of the Performances of an Active Load Oven
-
一种新的高精度流体热物性测试用低温恒温槽的研制
Development of a New-Type Low-Temperature Thermostat Bath for Fluid Thermophysical Properties Measurement
-
超级恒温槽使用功能的改进
Improvement on the service function of super constant temperature trough
-
控温精度为0.1℃的恒温槽控温电路
Controlling Circuit with 0.1 ℃ Precision for Constant Temperature Module
-
恒温槽温场温度均匀度的测试为旋光仪加装恒温水套
Temperature Homogeneity Measurement for Temperature Field of Thermostatic Bath
-
半导体致冷片设计小型恒温槽
Designing a Small-Sized Constant Temperature Bath with Semiconductor Refrigerant
-
低温冲击试验自动恒温槽
An automatic control cryostat for low temperature impact test
-
计算机辅助模拟物理化学实验教学系统&恒温槽操作模拟
Computer-Assisted Simulation of physical Chemistry Experiment Instruction System & Operating simulation of thermostat
-
恒温槽装配和性能测试实验仪器的改进
The Constant Temperature Slot Assembles to Experiment the Instrumental Improvement with Performance Test
-
恒温槽工作基于空气浴原理。
The oven operates on the air-bath principle .
-
恒温槽温场计量特性分析及仿真研究【医】旋流温水浴疗法
Research on the Metrological Properties Analysis and Simulation of Temperature Field of Thermostat Bath
-
精密低温恒温槽温度控制器
Temperature Controller of Precise Cryogenic Thermostat
-
给出了以管式炉和恒温槽为控制对象的仿真计算及实际应用结果。
The results of its simulation and application used in tube typed furnace and constant temperature trough are given .
-
实验台主要包括两部分:一是锥板式粘度计,一是恒温槽。其他辅助仪器包括特斯拉计等。
The bench of experiment consists of two main parts : first , cone-plate viscometer , second , Constant temperature bath .
-
介绍用于精密低温恒温槽的温度控制器的构成原理、设计思想和相关技术问题。
The compositional principle , design concept and relevant technical issues of the temperature controller for precise cryogenic thermostat are introduced .
-
用于恒温槽时控制精度优于0.01℃.实践证明该方法在高精度控温中具有良好的控制效果。
When used in a constant temperature trough , the control accuracy of the combined method is even smaller than 0.01 ℃ .
-
介绍了一种便携式低温恒温槽的工作原理及组成结构,并给出了试验数据。
Their principle and construction for a portable low constant temperature trough are introduced and their testing data are given in this paper .
-
本文阐述了有源负载恒温槽的工作原理,推导了描述其静态特性的缩减因数表达式,并对这种恒温槽的性能和应用作出了评价。
The expression of the reducing factor for calculating its static characteristics is derived , and the performances and applications of this oven are evaluated .
-
提高了系统的灵敏度、温度测量精度和稳定性;取消了恒温槽,降低了系统成本。
The new method can improve the temperature precision , stability and sensitivity of system and reduce the system cost with the constant temperature groove abrogated .