合金化

并给出了合金化温度对比接触电阻（ρc）的影响。

The effect of alloy temperature on the specific contact resistance ( Pc ) was studied .

MgO－Al2O3－CaF2粘结焊剂及其合金化研究

Research on MgO-Al_2O_3-CaF_2 System Bonded Flux and its Alloy Addition

基体合金化元素Cu对C／Al复合材料界面微结构的影响

Effects of Matrix-alloying-element Cu on the Interfacial Microstructure of C / Al-Cu Composite

激光表面Cr－Ni合金化层的成分控制与抗蚀性

Composition control and corrosion resistance on laser Cr-Ni alloying coating

铸铁表面Cr合金化层的微观结构及耐磨性能

Microstructure and wear resistance of Cr powder alloying layers on cast iron

碳钢表面激光TiN合金化的研究

Study of TiN laser alloying in the carbonic steel surfaces

微合金化是一种有效提高锡基无铅钎料性能的有效途径。本文主要研究和分析在Sn-0.7Cu钎料中添加微量的Co、Ni元素后对其性能的影响。

The micro-alloying is an effective method to improve the properties of Sn-based lead-free solder .

Ni在NaCl-KCl-PrCl3熔体中的电化学合金化

Electrochemical alloying of Ni in molten nacl-kcl-prcl_3

机械合金化过程中Fe（70）B（30）粉末晶粒尺寸和微观应变的研究

Study of Crystal Size and Microstrain by Mechanical Alloying on Fe_ ( 70 ) B_ ( 30 ) Powder

机械合金化Nd（Fe，Mo）（12）Nx的结构与磁性能

Structure and Magnetic Properties of Mechanically Alloyed Nd ( Fe , Mo ) 12 N x Compounds

时效处理对Nb微合金化钢筋屈服的影响

Effect of Aging on Nb Micro-alloyed Reinforced Bar 's Yield

稀土La的渗入起到了微合金化的作用。

The La , as rare earth element , permeated , produce the effect of microalloying .

M2高速钢激光表面钴合金化的研究

Study on Laser Surface Alloying of M2 High Speed Steel with Cobalt Powder

薄板坯连铸连轧工艺Ti微合金化高强钢屈服强度影响因素回归分析

Regression Analysis of Influence Factors to Yield Strength for Ti Micro-Alloying High Strength Steel in Thin Slab Casting and Rolling Process

在CSP线生产550MPa以上V微合金化HSLA钢的试验研究

Testing on production of vanadium-microalloyed HSLA steel with over 550 MPa strength in CSP

控轧控冷工艺参数对Nb微合金化高碳钢组织的影响

Effect of Controlled Rolling and Cooling Process Parameters on Structure of Nb Microalloyed High Carbon Steel

通过X射线衍射，分析讨论了机械合金化和高温自蔓延方法合成稀土-WSi2/MoSi2复合材料粉末过程中的相变化；

The phase transformation had been analyzed by X-ray during synthesis of rare earth - WSi_2 / MoSi_2composite by mechanical alloying and self-propagating high-temperature synthesis .

通过对化学镀NiP层进行合金化，获得了一种含W9.7%.P5.9%的NiWP三元合金镀层。

A new tertiary alloy deposit of Ni-W-P containing 9.7 % of tungsten and 5.9 % of phosphorus was developed by alloying the electroless nickle coatings .

利用高温应力法研究Ti含量和冷却速度对中碳微合金化钢沉淀强化效应的影响

Influence of Ti content and cooling rate on precipitation strengthening effect in medium Mn-V microalloyed steels by a high temperature stress method

本文探讨了低V在白口铸铁中的合金化和稀土变质的作用。

An investigation was concerned with the effect of alloying elements v and RE modifier on the structure and properties of white cast iron .

合金化填充材料Ti及其它工艺参数对SiCp/6061Al等离子弧焊焊缝组织及性能的影响

Effect of Alloying Filler Titanium and Other Welding Parameters on Microstructure and Mechanical Properties of Welded Joint during PAW of SiCp / 6061Al

论述了用机械合金化技术制备纳米WC硬质合金粉的影响因素。

The influence factors of nanometer WC cemented carbide powder produced by mechanical alloying are also reviewed .

通过加入Cu、Cr元素进行微合金化处理改善了制动鼓显微组织和力学性能，以提高制动鼓的工作寿命。

The microstructrue and mechanical properties of wear brake drum were improved by means of microalloying with Cu and Cr to increase its service life .

经XRD和EDS分析烧结后金/铂得到了很好的合金化，且焊接性能良好。

By XRD and EDS analysis , Au / Pt powder obtain good alloying and has good weld ability .

提高钢的洁净度，加入Ni，Cu等耐腐蚀元素和进行微合金化提高钢的抗断裂韧性是防止辙叉表面剥落的主要措施。

Increasing cleanliness of steel , adding anti - corrosion element Ni and Cu and microalloying of steel are main measures to prevent frog surface spalling .

NiAl金属间化合物力学性质的合金化效应

Alloying Effects of the Mechanical Properties of B_2-NiAl Intermetallic Compound

Cr、Yb合金化对Al-Zn-Mg-Cu-Zr合金组织和断裂特征的影响

Influence of Cr and Yb Alloying on the Microstructures and Fracture Characteristics of Al-Zn-Mg-Cu-Zr Alloy

机械合金化制备Cu-Cr合金时效强化特性的研究

Study on Age Hardening Characteristics of Cu-Cr Alloy Prepared by Mechanical Alloying

光束合金化合成Fe-Al系金属间化合物涂层的微观特征

Microstructure characteristics of Fe-Al intermetallic compound coating synthesized by light beam alloying

铝镁合金化对VH2电子结构的影响

Effect of Mg and Al alloying on electronic structure of VH_2