合金粉末

  • 网络Alloy Powder
合金粉末合金粉末
  1. 超音速气体雾化高硅铝合金粉末冷却速度计算

    Cooling rate calculation of a high silicon aluminum alloy powder prepared by ultrasonic gas atomization process

  2. 结果表明:气体雾化法制备的储氢合金粉末氧含量低,呈球形无表面缺陷;

    The results indicate that the hydrogen absorbing alloy powder manufactured through gas atomization contains little amount of oxygen .

  3. 铝青铜合金粉末涂层制备中Fe元素的扩散特性

    Dispersion characteristics of element Fe in preparation of aluminum bronze alloy powder coating

  4. 采用均匀颗粒成型法(uniformDropletSpray-UDS)制备Fe基合金粉末。

    Fe-based alloy droplets were generated by Uniform Droplet Spray ( UDS ) .

  5. 高能球磨制备纳米掺La硬质合金粉末

    Preparing Nano-crystalline La Doped WC / Co Powder by High Energy Ball Milling

  6. 本文还报道了用自制Fe基合金粉末成功修复大型轧辊的实例

    As a practical example , a large mill roll has been successfully repaired with the self-made Fe-based alloy powders

  7. TiC弥散强化铁基合金粉末的研究

    Study of TiC Dispersion Strengthening Fe Base Alloy Powder

  8. 本文在45钢基板上利用Fe基和Ni基合金粉末,进行激光熔覆快速成形试验研究。

    This research adopts Fe-based and Ni-based alloy powder based on the 45-steel plate for laser cladding rapid prototyping experiments .

  9. TiAl基合金粉末爆炸烧结特性常数的测算

    Calculating of Characteristic Date Explosive Sintering of TiAl Based Powder

  10. 快速凝固Al-Si合金粉末的电镜观察

    TME Observation of Rapid Solidification of Al-Si Alloy Powders

  11. 超音速气雾化过共晶Al-Si合金粉末特性及组织

    Characteristics and Microstructure of Hypereutectic Al-Si Alloy Powder by Ultrasonic Gas Atomization Process

  12. 研究了激光熔覆FeNiCrBSi合金粉末时粉末中的碳含量对于熔覆层组织、开裂敏感性、硬度和硬度均匀性的影响。

    The effects of carbon content on the microstructure , cracking sensibility , hardness and hardness uniformity of Fe-Ni-Cr-B-Si alloy powders laser-clad layers was studied .

  13. 采用差示扫描量热法(DSC),分析了歧化态合金粉末的脱氢-再结合行为。

    Differential scanning calorimetry ( DSC ) was used to characterize the desorption-recombination behaviour of the as-disproportionated alloy powder .

  14. 快冷Al-Si合金粉末热压时组织和硬度的变化

    The Effect of Hot Pressing on the Microstructure and Hardness of Rapidly Solidified Al-Si Alloy Powders

  15. 针对激光熔覆中的裂纹问题,进行了Ni基合金粉末单道、多道和梯度材料熔覆过程的裂纹试验,分析了材料成分对裂纹产生的影响;

    It analyzed effect of material ingredient on crack forming by cladding experiments of single cladding , multiple cladding and gradient material cladding of nickel-based alloy .

  16. 定量描述了Nd-Fe-B磁体的烧结致密化过程,分析了有效稀土含量、合金粉末粒度与烧结致密化过程的关系,讨论了Nd-Fe-B磁体烧结过程的致密化机制。

    The densification process and densification mechanism during sintering of Nd-Fe-B magnets were investigated .

  17. 热处理对Mn5Ge(2.8)Sb(0.2)合金粉末磁热效应的影响

    Influence of heat treatment on magnetocaloric effect of the Mn_5Ge_ ( 2.8 ) Sb_ ( 0.2 ) alloy powder prepared by ball miller

  18. 研究了以共沉淀法制备的镍-钴草酸盐为前体,在一定温度下分解制备Ni-Co合金粉末的方法。分析了金属粉末的化学成分。

    A process for making Ni Co alloy powder from a precursor of Ni Co oxalate prepared by coprecipitation method was investigated , its chemical compositions were analyzed .

  19. 金刚石工具用Ni-Co合金粉末的制备及表征

    Preparation and characterization of Ni-Co alloyed powder used in diamond tools

  20. 综合比较认为真空保护球磨Mg合金粉末的质量较好,但乙醇保护球磨更好地揭示了球磨过程中Mg合金粉末微观结构的变化。

    A comprehensive comparison shows that ball milling under vacuum produces better quality powders while ball milling under alcohol more clearly reveals the microstructure transformation of Mg alloy powders .

  21. HMD法制备U-10wt%Mo合金粉末的粒度控制

    Granularity Control of U-10wt % Mo Powder Prepared by HMD Method

  22. PREP制取高温合金粉末的特点

    Characteristics of prep in preparing superalloy powder

  23. 多级雾化Cu-Cr合金粉末成形后的组织和性能

    Microstructure and Property of Multistage Atomized Cu Cr Alloy

  24. 然后对歧化态Nd-Fe-B合金粉末的脱氢-再结合过程的热力学和动力学特征进行研究。

    Then , the thermodynamic aspects of the desorption-recombination experiments of disproportionated Nd-Fe-B alloy were analyzed .

  25. 对预合金粉末进行了性能表征,所制得的Ni-Co预合金粉末氧含量低,形貌近似球形,粒度均匀;

    The material properties of the pre-alloyed powder were characterized ;

  26. 快速冷凝Ti3Al基合金粉末性能研究

    Study on the Powder Properties of Ti_3Al Based Alloys by Rapid Solidification

  27. Ml(NiCuAlZn)5储氢合金粉末的包覆处理

    Encapsulation of Ml ( NiCuAlZn ) _5 Hydrogen Storage Alloy Powder

  28. NiFe合金粉末触媒合成金刚石研究

    Study on Synthesizing Diamond with NiFe - alloy Powder Catalyst

  29. Fe-Ni合金粉末材料渗碳烧结的研究

    Study of Carbusintering Process of Fe-Ni Alloy Powder Materials

  30. Al-Mg合金粉末冶金成形性研究

    Preparation of Al-Mg Alloy by Powder Metallurgy Forming