雾化法

  • 网络Atomization Method
雾化法雾化法
  1. 预合金粉末是采用多种金属熔炼成低熔点合金后再喷制成的粉末,其制取可以用雾化法和湿法冶金等工艺生产。

    The pre-alloyed powder forms from the fusion of multiple metals and by means of atomization and hydrometallurgy .

  2. 而传统的微粒子制备方法,如切丝打孔重熔法、雾化法以及均匀液滴成型法等都有或多或少的缺点,不能满足上述应用领域的使用要求。

    While , the traditional preparation methods of micro particles , such as Cutting Punching Remelting Method , Atomization , Uniform Droplet Spray Method ( UDS ) have more or less faults , and cannot meet the requirements of the above application fields .

  3. ICP-AES雾化法氢化法联合同时测定人血清中三十种元素

    Simultaneous determination of 30 elements in human serum using ICP-AES by nebulization and hydride generation methods

  4. 用于MIP-AES的气动雾化法的研究

    Study on a Pneumatic Nebulization Sample Introduction System for MIP-AES

  5. 对于雾化法得到的ZWC预合金粉末和ZSF预合金粉末组成的胎体锯片,金刚石浓度为18%时即能够保证有较好的锋利度、耐磨性以及加工质量。

    Better sharpness , wearability and working quality of the saw blades can be ensured by using atomized prealloyed powder ZWC and ZSF at diamond concentration of 18 % .

  6. 断续喷洒去溶电热雾化法在电感耦合等离子体原子发射光谱方法中的应用研究

    Application of Intermittent Injection Desolvation-Electrothermal Vaporization Method in Inductively Coupled Plasma-Atomic Emission Spectrometry

  7. 干扰素超声雾化法对呼吸道合胞病毒肺炎的疗效观察

    Effect of Ultrasonic Aerosol Inhalation of Interferon on Treatment of Respiratory Syncytial Virus Pneumonia

  8. 同时提出雾化法乙氧基化反应器结构优化设计的方法。

    This article also propose the reactor optimization design method of atomization ethoxylation reactor .

  9. 结论采用超声雾化法治疗急性皮炎湿疹效果与湿敷法相当。

    Conclusions Ultrasonic atomization was effective as wet dressing therapy on acute dermatitis and eczema patients .

  10. 本文所讨论的电热雾化法是采用继续喷洒去溶技术,使试样在石墨炉表面逐步积累的进样方法。

    The intermittent injection desolvation method is used to accumulate the sample onto the graphite furnace surface .

  11. 铝粉雾化法是现今生产铝粉的主要方法,生产企业对监控系统和监控方法提出了越来越高的要求。

    Aluminum powder atomized method is the mainly production methods now . Aluminum production enterprise requires higher on monitoring systems .

  12. 氮气雾化法生产铝粉具有细粉率高,铝粉活性好,球形铝粉成型率高,生产安全等优点。

    Nitrogen atomization method has the following privileges : high percent fine powder , good activation and shape , production safety etc.

  13. 目的观察清热解毒中药超声雾化法在治疗眼睑炎症中的临床效果。

    Objective To observe the effectiveness of traditional Chinese medicine in clearing away heat and detoxification on the inflammatory eyelids by ultrasonic nebulization .

  14. 较传统的气动雾化法,检出限降低了10~100倍。

    The detection limits of Sb , As and Hg are re - duced by 10 ~ 100 times compared with the traditional pneumatic nebulization method .

  15. 首先分别简述了气体雾化法、熔体快淬法和铸带法制备储氢合金的微观组织结构特征和电化学性能。

    Firstly , the microstructure and the electrochemical properties of hydrogen storage alloys prepared , respectively , by gas atomization , melt quenching and strip casting were presented .

  16. 铝粉在工业生产中发挥着重要作用,氮气雾化法由于其活性好,细粉率高而被广泛应用。

    Aluminum powder plays an important role in the industrial production . The nitrogen atomizing technology has the reactive feature and the fine power proportion , so it is adopted by many enterprises .

  17. 借助于高速气流直接破碎金属或合金液流而制得粉末的金属熔体的二流雾化法是粉末冶金最重要的制粉方法之一。

    Two-fluid atomization of molten metal , in which molten metal is directly crashed into droplets by a high velocity gas stream and then rapidly solidified into powders , is one of the most important methods for the preparation of powders .

  18. 实际的运行结果表明,该控制系统控制精度高,运行稳定,人机交互界面友好,操作方便快捷,满足了氮气雾化法生产铝粉的控制要求,为企业的经济效益做出了贡献。

    The result of field operation shows that the control system has high control accuracy , high stability and friendly man-machine interface . It meets the need of aluminum powder manufacture via nitrogen atomization method , contributing to the economic benefit of the enterprise .

  19. 雾化蒸发法处理Vc废液的研究

    Study on the Treatment of Waste Liquor from Vc Production by the Atomization-vaporization Technology

  20. 研究了雾化蒸发法处理Vc废液的可行性。

    This paper makes a study of the possibility of treatment waste liquor from Vc production by the atomization-vaporization technology .

  21. 超声雾化麻醉法在纤维支气管镜中的应用

    The use of ultrasonic aerosol spraying anesthesia in fibreoptic bronchoscopy

  22. 用雾化熏蒸法消毒,两种消毒剂均达不到消毒要求。

    Aerosol fumigation disinfection with both disinfectants could not fulfil requirement of disinfection .

  23. 采用木瓜蛋白酶雾化吸入法建立兔肺气肿模型。

    Rabbit models of emphysema were established by caroid aerosol inhalation . 2 .

  24. 3种雾化吸入法治疗支气管哮喘的比较

    Comparison on three different ways of atomizing inhalation to treat patients with asthma

  25. 雾化吸入法治疗矽肺合并结核病人的疗效观察

    Effects of Inhalation Method for Treating Silicosis-tuberculosis Patients

  26. 超声雾化提取法测定3种香料中的挥发性成分

    Determination of Volatile Components from Three Kinds of Spices by Ultrasonic Nebulization Extraction-Gas Chromatography

  27. 结论氧驱动雾化吸入法治疗小儿喘憋性肺炎有更好的疗效。

    Conclusion The oxygenic force atomization atmotherapy is better than supersonic atomization atmotherapy in treating child bronchiolitis .

  28. 目的:探讨治疗儿童哮喘,缓解支气管痉挛,迅速解除缺氧状态的方法,验证氧驱动雾化吸入法的疗效。

    Objective : To evaluate the clinical effect of the therapy of nebulized oxygen inhalation on infants with asthma .

  29. 方法用高渗盐水超声雾化吸入法留取研究组及对照组儿童支气管诱导痰液。

    Methods Collected sputum in children with bronchial asthma and normal volunteers by way of hypertonic saline inhalation challenge .

  30. 用雾化喷涂法或涂刷法直接在钢材或工件表面上形成厚度均匀、结构致密、粘结牢固的覆层坯体。

    The green body possesses uniform particle distribution , compact structure , controllable thickness , proper flexility and tensile strength .