冷轧取向硅钢
-
MnS和板坯加热温度对3%Si冷轧取向硅钢性能的影响
Effect of MNS and slab reheating temperature on properties of ORIENTED-GRAIN fe-3 % si
-
冷轧取向硅钢CGG-1初轧开坯工艺探讨
Discussion on Blooming Process for Cold Rolling Oriented Silicon Steel CGG - 1
-
冷轧取向硅钢织构的演变规律及模拟分析
Analysis of Simulation and Evolution of Texture in Cold Rolled Grain-oriented Silicon Steel
-
冷轧取向硅钢片中的抑制相系
Restraint Phases for Cold-Rolling Oriented Silicon Sheet
-
硅钢的氧化特性非晶态合金的主要用途是取代冷轧取向硅钢制作变压器的铁芯。
Amorphous metals is mainly used instead of grain oriented silicon steel in making transformer cores .
-
复合线圈宜选用软磁材料制作,根据复合感应器的特点,本文选用在电源变压器中有着广泛应用,并且工艺比较成熟的冷轧取向硅钢片制造复合感应线圈。
Based on compound inductor characteristics , Cold-rolled SI-ORIENT-CORE Oriented Electrical Steel Sheets which have broad application in power transformers and mature manufacture techniques are the best choice .
-
微量Ti对冷轧无取向硅钢片磁性的影响
Effect of trace amount of titanium on the magnetism of cold rolled nonoriented silicon steel sheet
-
冷轧无取向硅钢再结晶退火过程的EBSD分析
EBSD investigation of cold-rolled non-oriented silicon steel in recrystallization annealing process
-
冷轧晶粒取向硅钢生产工艺技术的研究进展
Research Progress in Production Technology of Cold Rolled Oriented Silicon Steel
-
冷轧无取向硅钢片电磁性能的控制
Control of magnetic properties on cold-rolled non-oriented silicon steel sheets
-
高纯度冷轧无取向硅钢冶炼技术的发展
Development of refining technologies for high cleanliness cold rolled non-oriented silicon steel sheet
-
轧制条件对冷轧无取向硅钢织构的影响
Effect of Rolling Process on Texture Evolution of Cold Rolled Non-Oriented Silicon Steel
-
冷轧无取向硅钢的织构和组织性能分析
An Analysis on Texture and Structure Property of Cold Rolled Non-Oriented Silicon Steel
-
窄带状冷轧无取向硅钢片磁性能测量的方法研究
Study on Magnetic Property Testing Method of Narrow Cold-rolled Non-oriented Silicon Steel Sheet
-
冷轧无取向硅钢热带钢生产工艺研究
Research on Production Technology for Cold Rolled Non-orientation Si Steel Hot Rolled Strip
-
含硼冷轧无取向硅钢的研制
Research and production of boron bearing cold rolled non - oriented silicon steel
-
冷轧无取向硅钢的实验研究
Experimental research on cold rolling non-oriented silicon steel
-
电磁搅拌工艺在冷轧无取向硅钢的开发及应用
Development and Application of EMS Process for Cold Rolled Non - Oriented Silicon Steel
-
磁场退火对冷轧无取向硅钢微观组织的影响
The effects of magnetic annealing on microstructure of the cold rolled non-oriented silicon steel
-
冷轧无取向硅钢连续退火线干燥炉设计
Design of drying furnace in continuous annealing line for cold rolled non & oriented silicon strip
-
低牌号冷轧无取向硅钢的织构及电磁性能的对比分析
Comparison and Analysis of the Low Grade Cold Rolled Non-oriented Silicon Steel on Texture and Magnetic Property
-
研究了不同电流条件下退火冷轧无取向硅钢组织的变化规律。
The change rule of the microstructure of the coldrolled Sisteel annealed under different current was researched .
-
高牌号冷轧无取向硅钢片磁畴、晶粒尺寸对铁损的影响
Effect of Domain Structure and Grain Size on the Loss in High-guality Cold-rolled Nonoriented Silicon Steel Sheet
-
退火温度对冷轧无取向硅钢组织结构和磁性能的影响
Influence of Annealing Temperature on Structure , Texture and Magnetic Properties of Cold Rolled Non-Oriented Silicon Steel
-
冷轧晶粒取向硅钢的生产及市场动态分析
Recent advances in producing grain oriented silicon steel the production of cold rolled oriented silicon steel and the market trends
-
针对冷轧无取向硅钢冲片在热处理后铁损值升高的问题进行了分析研究,并提出了解决措施和建议。
Based on analysis and study , this paper advances suggestions and solutions to the problem about iron loss increasing of punched cold-rolled non-oriented silicon steel sheet after heat treatment .
-
结果表明,降低铸坯加热温度,提高终轧温度和卷取温度,有利于改善该冷轧无取向硅钢成品的磁性能;
The results showed that decreasing heat temperature of cast slab , increasing finishing rolling temperature and coiling temperature were available to improve magnetic properties of the cold rolled non-oriented silicon steel ;
-
研究了冷轧无取向硅钢片晶粒尺寸及其均匀性对铁损的影响,统计出不同温度氢气热处理和真空热处理后各种晶粒尺寸所占百分比。
Effects of the grain size and homogeneity of cold-rolled disorientation silicon steel sheet on the core loss was studied . Percentages of different grain sizes were calculated statistically after performed in hydrogen atmosphere and in vacuum at different temperatures .
-
除钢质的纯净度、夹杂物聚集程度、再结晶组织外,织构分布和各组分强度对冷轧无取向硅钢的磁性能磁感应强度和铁损亦具有显著的影响。
Besides cleanliness , degree of inclusion accumulation and recrystallization structure of steel , the texture distribution and intensity of each component have obvious influence on magnetic performance - magnetic induction strength and iron loss of cold rolled non-oriented silicon steel .
-
冷轧高牌号无取向硅钢生产工艺的实验室研究
Lab scale study of production process for cold rolling high grade non-oriented silicon steel