交流伺服电动机

通过分析数控玻璃雕刻机加工工艺的特点，提出了一种基于工业PC机、PMAC卡运动控制器及交流伺服电动机为主体的玻璃雕刻机数控系统，并对它的硬件和软件设计作了详细的论述。

In this paper , the author analyzes the characteristics of working process of NC glass groove machine , deve-lops the NC system of the machine based on industrial PC 、 PMAC board and AC servo motor and describes its hardware and software designs in detail .

交流伺服电动机神经元PID自适应控制器的研究与开发

Study and Implementation of the AC Servo Motor Neuron PID Self-adapt Control Strategy Control System

直接驱动容积控制电液伺服系统（DDVC）是交流伺服电动机技术在液压领域中的成功应用。

Direct Drive Volume Control Servo System ( DDVC ) which combines AC servo motor technology and frequency conversion technology is a successful application in hydraulic .

单芯片交流伺服电动机速度控制器的实现

Single chip implementation of speed servo controller for AC servo motor

数控交流伺服电动机的性能特点及发展趋势

The features and developing trend of NC alternating current servo motor

交流伺服电动机在液压调速回路中的应用

The Application of the AC Servo-motor to the Hydraulic Timing Loop

一种新型交流伺服电动机旋转感应电压的计算

The Rotating Induction Voltage Calculation of a New Type AC Servomotor

永磁交流伺服电动机定位转矩的消除方法

Remove method on position-setting torque of permanent magnet AC servo motor

交流伺服电动机转子初始位置的精确测定

The Precise Measurement of the Rotor of AC Servo Motor

交流伺服电动机采用半闭环伺服控制系统。

Communicate the servo electric motor adoption half shuts wreath servocontrol system .

永磁交流伺服电动机的设计特点

The design feature of permanent magnet AC servo motor

永磁交流伺服电动机运行性能仿真

The Research of the Simulation of Permanent-magnet AC Servomotor

一种新型无需外配位置传感器交流伺服电动机的研究

Study of a New Type AC Servo Motor no need for External Position Sensors

矢量控制永磁同步交流伺服电动机初始磁极位置搜索方法

Initial Magnetic Pole Position Detect Method for Vector Control Permanent Magnetic AC Servo Motor

机械压力机交流伺服电动机直接驱动方式合理性探讨

Probing into Reasonableness of Direct Driving Mode of AC Servo Motor of Mechanical Press

削弱永磁交流伺服电动机转矩波动的措施研究

Research on the Measures for Reducing the Torque Ripple in Permanent Magnet AC Servo Motor

交流伺服电动机数字控制系统

Digital Control Syrian for AC Servo Motor

本文讨论了模糊控制的原理以及交流伺服电动机的控制结构。

In this paper the elements of fuzzy control and architecture of servo alternating motor are discussed .

实践证明这种方法快速准确，为永磁交流伺服电动机设计提供了新思路。

The veracity and speediness of this method is proved by experiment and new mind is achieved for design of PM servo motor .

该系统具有交流伺服电动机传动控制灵活性和液压传动功率密度大的双重优点。

Direct drive volume control electro-hydraulic servo actuator has advantages in the good flexibility of AC servo motor and large density in hydraulic power .

永磁交流伺服电动机力矩分析微分积分结合方法在轴向气隙永磁电机三维磁场计算中应用

Analysis on Torque of PM AC Servo Motor The Application of Integral-Differential Method to 3-Dimensional Magnetic Field Calculation of PM Electrical Machines with Axial Air-Gap

随着矢量变换理论的提出，以及微处理器技术、新型功率半导体元件、电动机永磁材料的发展和成本的降低，交流伺服电动机得到越来越广泛的应用，交流伺服系统已成为当今发展的主流。

With the development of the Vector Transformation , Micro Processor , Power Semiconductor and the reduction of PMSM cost , AC servo has become more popular .

确定了这种交流伺服电动机的有效齿极配合关系、最佳斜槽角度以及位置检测环节的最大原理性测角误差；

The effective cooperating relationship between the poles and the teeth , optimum skewing-slot angle and maximum principle-error of angle measurement of this kind of motor are determined .

该控制系统以方波电流控制型永磁交流伺服电动机（多称为直流无刷电动机）为控制对象，采用转速、电流双闭环控制。

This system takes the permanent magnetic motor of square wave current regulated ( The Brushless DC Motor ) as control object and realizes speed & current double closed loop control .

探讨了两种不同运行原理永磁交流伺服电动机的设计特点，指出磁路计算与传统电机的不同之处；

This paper studies the design features of permanent magnet AC servomotor with two kinds of different operation principles , and points out the difference magnet circuit calculating from traditional motor .

试验结果表明：冲箱式造波机在造规则波的过程中，其交流伺服电动机的轴端输出功率，呈周期性变化，且电动机的平均负载功率实测值与理论计算值吻合较好。

The experimental results reflect that the output power of the AC servo motor changes periodically and the actual values of the average load power coincide well with the theoretical values of it .

详细研究了一种新型无需外配位置传感器、少槽交流伺服电动机的原理和设计特点。

The principle and design characteristic of a kind of new type AC servo motor which is no need for the external position sensor and has the feature of few slots are studied detailedly .

鉴於此，海军装备部要求我们研制以工控机作为数字控制器、以KOLLMORGEN驱动器为放大器、以稀土三相永磁交流同步伺服电动机为执行电机的高炮数字伺服系统。

The research of alternating current digital servo system with permanent magnetic electromotor and KOLLMORGEN drives based on industrial computer and windows operating system was required by the Weapon Department of the Navy .

分数槽在正弦波交流永磁伺服电动机中的应用

Apply Fractional Slot Winding into AC Sine Wave PM Servo Motor

正弦地改变方向的电流。介绍分数槽绕组在正弦波交流永磁伺服电动机中的应用及实例。

This paper introduces the application of the fractional slot winding in the AC sine wave PM servo motors as well as its prototype .