高能球磨

  • 网络high-energy ball milling;high-energy ball mill;high energy ball milling
高能球磨高能球磨
  1. 高能球磨法制备高电位梯度的ZnO压敏电阻

    High voltage gradient of zinc oxide-based varistors prepared by high-energy ball milling

  2. 高能球磨纳米CeO2/Zn复合粉末的热压烧结

    Hot-press Sintering of CeO_2 / Zn Nanocomposite Powders Prepared by High-energy Ball Milling

  3. B,高能球磨混料-真空焙烧-酸洗除杂。

    B.high energy ball mill mixing - vacuum , roasting-acid pickling for impurity removal .

  4. 高能球磨纳米Co系催化剂粉末的微观应力

    Micro stress for nano Co catalyst fines by high energy ball milling

  5. 高能球磨法制备铁基CO高温变换催化剂及其性能表征

    Preparation and Characterization of Iron-based High-temperature Water-gas Shift Catalysts with Ball Milling Method

  6. 高能球磨制备Al3Ti/Al块体纳米晶复合材料

    Preparation of bulk Al_3Ti / Al nanocomposite by high-energy ball milling and in-situ reaction sintering

  7. 高能球磨制备Ti(C,N)基金属陶瓷硬质相超微粉

    Ti ( C , N ) - based Cermet hard phase Ultrafine Powders Prepared by High Energy Ball-milling

  8. 氮气气氛高能球磨Al2O3相变研究

    Study on Phase Transformation of Al_2O_3 during High Energy Ball Milling in Nitrogen Atmosphere

  9. 高能球磨制备纳米掺La硬质合金粉末

    Preparing Nano-crystalline La Doped WC / Co Powder by High Energy Ball Milling

  10. 纳米CeO2/Zn复合粉末的高能球磨法制备与表征

    Preparation and Characterizations of CeO_2 / Zn Nanocomposite Powder by High-Energy Ball Milling

  11. 高能球磨过程中Ti与BN的反应

    Reaction of Ti with BN during high energy ball milling process

  12. 高能球磨对Fe2O3粉末形貌和成分的影响

    The influence of high energy ball milling on the morphology and composition of ferric oxide powder

  13. 以粗颗粒Al2O3粉为试样,采用高能球磨法制备了纳米Al2O3粉。

    The nano-Al2O3 powders were prepared from the coarse Al2O3 powders by high energy ball milling method .

  14. 结果表明:在高能球磨过程中软相Pb颗粒细化速度优于硬相Al颗粒;

    It 's results show that the soft phase Pb grain was refined preceding hard phase Al powder .

  15. 高能球磨Si还原CuO的固态还原反应

    Solid state reduction reactions of CuO by Si using high energy ball milling

  16. 高能球磨粉末冶金SiCp/Al复合材料的界面结构

    Interfacial Structures of SiC_p / Al Composites Fabricated by High Energy Milling Conjunction with Powder Metallurgy

  17. 高能球磨制备纳米TiC粉末

    Fabrication of nanocrystalline TiC powder by high-energy ball milling

  18. 高能球磨制备纳米TiO2/纳米晶Cu超细复合粉体

    Preparation of Nanocomposite Powders of Nano-TiO_2 / Nanocrystal Structure 's Cu by High Energy Ball Milling

  19. 轻稀土氧化物(La2O3,CeO2)对高能球磨制备纳米Co基催化材料的影响研究

    Influence of La_2O_3 , CeO_2 on Preparing the Nanometer Cobalt-based Catalysis Material by the High Energy Ball Mill

  20. 高能球磨25h,粉末中Co相的X射线衍射峰消失。

    The XRD peak of Co phase disappears after 25 h ball milling .

  21. Fe3O4/聚苯胺纳米复合材料高能球磨法制备及其性能研究

    Fe_3O_4 / polyaniline nanocomposites prepared by high energy ball milling

  22. 高能球磨对TiC钢结硬质合金孔隙度影响的研究

    Influences of High Energy Ball Milling on Pore Ratio of Steel Bonded Titanium Carbide

  23. 高能球磨锐钛矿型TiO2晶型转变的研究

    Polymorphic transformation of anatase TiO_2 caused by high-energy ball milling

  24. 高能球磨与反应烧结合成YAG∶Ce~(3+)荧光粉的研究

    Synthesis of YAG ∶ Ce ~ ( 3 + ) Phosphor by High Energy Milling and Reactive Sintering

  25. 高能球磨制备超细活性SiO2微粉工艺研究

    Preparation of active super-fine SiO_2 powder by high-energy ball mill

  26. 高能球磨与热压烧结制备TiAl基合金

    Preparation of TiAl-based Alloys by High-energy Ball-milling and Hot-pressing Sintering

  27. 采用高能球磨法,制备出了晶粒度约11nm的掺Ce硬质合金粉末。

    Ce doped hard metal powder of 11 nm grain size was prepared by high energy ball milling method .

  28. XRD结果表明高能球磨能有效地固溶Al2O3弥散相到铜基体中。

    XRD results showed that the high-energy ball milling can dissolve Al2O3 and alloy elements into Cu matrix .

  29. 高能球磨与无压烧结制备高铌TiAl合金

    Fabrication of High Nb Containing TiAl Alloys by High-Energy Ball Milling and Pressureless Sintering

  30. 高能球磨处理非晶合金Fe(78)Si9B(13)的晶化特点

    Crystallization Characteristics of Amorphous Alloy Fe 78 Si 9B 13 Treated by High Energy Milling