锌铁合金

汽车零部件锌铁合金滚镀工艺

Barrel plating process of Zn-Fe alloy for motor components and parts

介绍了适宜于锌铁合金电镀后的直接磷化工艺；

The direct phosphating process applicable to electroplated Zn-Fe alloy coating was introduced .

本文研究了硫酸盐镀液中添加剂、pH值、电解液成份对锌铁合金镀层的影响。

The effect of additives , pH , and bath composition on electrodeposition of Zn-Fe alloy were investigated .

而镀层中的含Fe量又直接影响镀层的耐蚀性。含Fe0.4%～0.8%的锌铁合金镀层其耐蚀性大大优于普通镀锌层。

Corrosion test show that the corrosion resistance of Zn-Fe alloy deposit with 0.4 % ~ 0.8 % Fe is superior to that of Zinc coating .

本文讨论了抗坏血酸的氧化还原反应以及对锌铁合金镀液中Fe2+和PH值的稳定作用。

Redox-Reaction of ascorbic acid and its stabilization for Fe 2 + ion and pH value in the plating solution of an alloy of zine and iron were discussed .

锌铁合金在防护电镀领域的应用实践

The Usage of Chloride Brightened Zn-Fe Alloy in Electroplating Protection Field

硫酸盐电沉积锌铁合金及腐蚀、力学性能

Electrodeposition and Corrosive-mechanical Behaviors of Zinc-iron Alloy Coatings from the Sulphate Baths

锌铁合金电镀工艺及黑色钝化研究

A Study on Electroplated Coatings of Zinc-Iron with Black Chromating

氯化物锌铁合金电镀工艺应用及改进

Application of Zinc-Iron Alloy Electroplating with Chloride Bath and the Process Modification

钢管电镀光亮锌铁合金生产经验

Experiences in Bright Zn-Fe Alloy Plating of Steel Pipes

锌铁合金在电缆桥架电镀中的应用

Application of Zn-Fe alloy to cable bridge rack plating

稀土铈对锌铁合金镀层耐蚀性的影响

Influence of Rare Earth Cerium Additive on Corrosion Resistance of Zn-Fe Alloy Coating

锌铁合金电镀层中铁含量影响因素的研究

Influence on Fe content of Zn-Fe Alloy Electrodeposits

从废锌铁合金中制备硫酸锌

Preparation of Zinc Sulfate from the Waste Mechanical Parts of Zinc and Iron Alloy

锌铁合金镀层铁含量与其性能的关系

Effect of Iron Content in Electrodeposited Zn-Fe Alloy on Some Properties of the Deposits

氯化物全光亮锌铁合金电镀工艺及应用

Bright Chloried Zn-Fe Alloy Electroplating and Its Application

镀液成份对锌铁合金化学和相组成的影响

Effect of Bath Composition on the Chemical Constitute and Phase Structure of Zn-Fe Alloy

碱性锌酸盐体系锌及锌铁合金电镀添加剂

Additives for zinc and zinc-iron alloy electroplating

全光亮锌铁合金电镀工艺

A Fully Bright Zn-Fe Alloy Plating Process

抗坏血酸在锌铁合金镀液中的作用

The Function of Ascorbic Acid in the Plating Solution of an Alloy of Zinc and Iron

碱性490型锌铁合金电镀工艺

490 Alkalescent Ferro-zinc Alloy Plating Technology

碱性锌铁合金工艺试验及其应用

Alkalinity Zinc-iron Alloy Test and Application

为适应国家有关淘汰含氰电镀的规定，提出以氯化物锌铁合金电镀工艺替代含氰电镀。

To meet the directive of rejection of cyanide plating in China , chloride Zn-Fe alloy plating was presented to replace cyanide plating .

用光亮锌镍合金或锌铁合金镀层代替光亮镍层是可行的，但在镀铬前必须闪镀镍。

It is feasible to substitute nickel coating with bright Zn-Ni alloy or Zn-Fe alloy coating if a strike nickel deposit is applied before the subsequent chromium plating .

综述了碱性锌酸盐体系锌及锌铁合金电镀添加剂的研究和发展，添加剂产生光亮作用的机理。

Research and development of additives of zinc and zinc-iron alloy electroplating and brightening mechanism of its functioning additives in alkaline zincate solution were reviewed with 16 references .

为了保持基体金属硬度、磁性以及电镀层性能等均不变，将锌铁合金电镀工艺与磷化工艺进行了组合，以提高钢铁件的防护性能。

Holding primary hardness , magnetism and plating properties of matrix , protection performance of steel was improved by combining the Zn - Fe alloy electroplating and phosphating technology .

某厂汽车零部件滚镀自动线采用锌铁合金新工艺取代了原氰化滚镀锌工艺。

A new Zn-Fe alloy plating process alternative to former cyanide zinc plating was adopted for barrel plating auto lines of motor components and parts in the factory of Chang'an group Co.

简要介绍了已开发的多层镍电镀工艺、铜锡合金、铜锌合金、锌铁合金、镍铁合金等代镍工艺，以及厚（薄）铜薄镍电镀工艺。

The developed processes such as multi-layer nickel plating , tin-copper alloy plating , zinc-copper alloy plating , iron-zinc alloy plating , iron-nickel plating and thick copper with thin nickel layers electroplating were described .

锌铁磷合金镀层是在Zn-Fe、Zn-P或Fe-P合金的基础上发展起来的一种钢铁表面的防护与装饰性镀层。

Zinc - iron-phosphorus alloy electrodeposits are protective and decorative coatings for iron and steel which were developed on the basis of zinc-iron , zinc-phosphorus and iron-phosphorus alloy deposits .

锌铁及其合金镀层黑色钝化膜耐蚀性能的研究

Black Passivation and Corrosion Resistance of Zn-Fe Alloy Coatings