钎焊

本文主要是研究在爆炸的复合板上开槽钎焊和堆焊后，Cr、Ni、Al三种元素的扩散规律。

The spreading law of three elements of Cr , Ni and Al , after braze welding and surfacing in the exploded composite plates was studied .

影响Ti3Al钎焊接头性能的关键因素探索

Key Factors Effecting on Properties of Ti_3Al Braze Joints

圆环钎焊蜂窝结构超声C扫描检测及其系统研制

Development of Ultrasonic C-Scan System Applied to Inspect the Torus Brazing with Honeycomb

铝基活性钎料真空钎焊Cf/C复合材料焊接接头的组织及性能

Microstructure and Properties of Vacuum Brazing C_f / C Composites Using Reactive Al Based Filler Metals

目的研究工业CT对钎焊焊接试样内缺陷的检测灵敏度。

Objective The flaw detection sensitivity of industrial computed tomography to welding sample was studied .

Al接触共晶反应钎焊接头形成过程和机理

Process and mechanism of Al eutectic contacting reaction brazing

电子束钎焊温度场PID控制系统

Electron beam brazing temperature field PID control system

Al合金接触反应钎焊接头力学响应及中间层厚度的确定

Mechanical Responding of Al Alloy Contact Reactive Brazed Joint and Selecting of the Interlayer Thickness

复相Al2O3基陶瓷/钢大气中直接钎焊连接界面的微观组织结构

Interfacial microstructure of Al_2O_3-based ceramic composite / steel joint by brazing in air

Co含量对（WC-Co/NiCrBSi）复合钎焊涂层耐磨性的影响

Effect of Co Content on the Wear-resistance of ( WCCo / NiCrBSi ) Composite Brazing Coating

用急冷Al基活性钎料钎焊Si3N4陶瓷的研究

Brazing of si_3n_4 ceramic using rapidly solidified Al-based active filler metals

Al2O3弥散强化铜与T2铜的真空钎焊研究

Study on Vacuum Brazing of Al_2O_3 Dispersion-strengthen Copper and Copper T2

铜-铝合金CPU散热器钎焊技术研究

A new technology for brazing of aluminum alloy to copper of CPU radiator

SnCu钎料镀层与Cu/Ni镀层钎焊接头的界面反应

Interfacial reactions between Sn-Cu solder alloy and Cu / Ni coatings during reflow soldering

TEM试样采用银铜钎焊方法及离子减薄等技术手段来制备，成功地制备出用于透射电镜观察的涂层界面试样。

The TEM samples were prepared by the method of welding and ion-beam thinning .

本文主要介绍利用DDZ&Ⅱ系列仪表对高温真空扩散钎焊电阻炉实现PID精确控温。

PDZ-II series instruments are used to attain PID precise temperature control for high temperature vacuum diffusion brazing furnace .

含Ti钎料钎焊碳纤维复合材料与钛合金的界面微观分析

Brazed Interface Microanalysis of Carbon-fiber Reinforced Composite Material and Titanium Alloy by Brazing Filler Metal Containing Ti Element

复相A12O3基陶瓷/钢在大气中直接钎焊的连接工艺

Combination Process of Al_2O_3 Ceramic / Steel Using Braze Welding Method in Air

Cr对Ni-P系钎料钎焊不锈钢接头性能的影响

Effect of Cr on Property of Stainless Steel Joint Brazed with Series Ni-P Filler Metal

活性钎料真空钎焊Si3N4/钢接头性能的研究

Properties of Vacuum Brazed si_3n_4 / steel joint using active brazing filler metal

TiC陶瓷/NiCrSiB/铸铁钎焊连接的界面组织和强度分析

Interface structure and strength analysis of brazing TiC ceramic / NiCrSiB / Iron

本文采用Si作为中间层介质进行了铝的接触反应钎焊，并得到良好的接头。

In this paper , a good contact reactive brazed joint of Al was gained by using silicon as an interlayer .

通过选择接触反应钎焊的中间层成分，采用Si为中间层介质进行钎焊工艺试验。

The interlayer for contact reactive brazing was chosen , and the brazing technical experiments using Si interlayer were carried out .

试验结果为实现SiC颗粒增强铝基复合材料的钎焊连接提供了理论基础。

The theoretic foundation on brazing of SiC particulate reinforced aluminum matrix composites was provided by the testing results .

TIG电弧钎焊钎料液滴内部流场数值模拟及分析

Numerical Simulation and Analysis of Flow Field in Arc Brazed Filler Metal Droplet

采用复合钎料钎焊Si3N4陶瓷

Si_3N_4 ceramics brazing with composite soldering materials

快速凝固Al-Cu钎料钎焊铝Cu对钎缝组织的影响

Influence of Cu on microstructure of soldered joint in Al brazing with rapid-solidifying Al-Cu solder

Hf和Zr是钎焊用中间层合金的降熔点元素。

Hf and Zr are the melting point depressant in the interlayer alloys used for brazing .

研究了Cu，Zn复合层对Al接触反应钎焊过程和接头质量的影响规律。

The effects of Cu Zn compound layer on the process and joint properties of the Al contacting eutectic reaction brazing were studied .

研究了采用钎焊方法，在空气加热炉中实现PTC陶瓷材料与铝合金的连接问题。

Brazing process between PTC ceramic and aluminium alloy within air heated furnace is studied .