钎剂

进一步的研究指出：6063铝合金中的合金元素Mg是使钎剂失效和恶化钎缝质量的主要原因。

Further research shows that element Mg in 6063 is the main cause making the flux ineffective and the quality of brazed seam degraded .

对该钎剂进行了不挥发物含量、腐蚀率试验。

Volatile content and erosion rate of the flux were studied .

不同钎剂对Sn-Zn系无铅钎料润湿特性的影响

Effects of different fluxes on the characteristics of Sn-Zn solders

此外，H2O的存在或形成促进了HF的生成，从而加速了钎剂的去膜进程。

Moreover , the presence or formation of H2O accelerates the generation of HF , which accelerates the Striping rate of oxide film accordingly .

本文用平百铺展试验和T型接头试验，研究了6063铝合金采用AI－St钎料和氟化物钎剂（QF钎剂）钎焊时的钎焊性和钎缝质量。

The brazing-ability and quality of brazed seam of 6063 aluminum alloy brazed by Al-Si eutectic filler metal and QF flux is discussed by means of test of spread-ability and test of T joint .

采用商用水洗钎剂，以铺展面积和润湿角来表征钎料的润湿性能，研究了Ag、RE对Sn-Ag-Cu-RE系无铅钎料润湿性的影响。

The effect of silver and rare earths on wetting properties of Sn-Ag-Cu-RE lead-free solder by adopting commercial water-soluble flux was researched by means of spread area and wetting angle .

新型高温铝钎剂FA-3的研制

Development on the advanced high-temperature aluminum soldering flux-FA-3

结果表明，在钎剂为WC质量4%时复合涂层孔隙度低，复合涂层与45号钢基体为良好的冶金结合，界面区组织致密。

The experimental results suggested that when the quantity of the brazing flux was 4 % of WC mass , the porosity of the coating would become lower and the interface between composite coating and the steel base would be bonded well .

依据银钎剂QJ102的原料配比，通过改进配制工艺，对银钎剂进行了改性处理研究。

According to the material formula of QJ102 for silver bases filler metals , by improving the processing technology , the research of modifications for silver brazing fluxes have been done .

Ag-Cu-In-Sn系合金钎料，熔化温度在557~693℃之间，适合于电真空、半导体及微电子器件在真空或保护气氛中无钎剂中温钎焊。

Brazing filler metals of Ag-Cu-In-Sn series , whose melting temperature is between 557 ~ 693 ℃, fit for the braze welding of electron tube , semiconductor and microelectronic device under the condition of vacuum or protective atmosphere .

研究并配制了新型无腐蚀性铝钎剂。

A new type of non-corrosive brazing flux has been studied .

铝用氟化物钎剂的配制方法及对钎焊性能的影响

Effect of compounded method for fluoride flux on behavior as brazing aluminium

W/O微乳液法制备纳米铝钎剂实验材料与方法

Study on the Preparation of Nano-Aluminum Flux Material in Microemulsion

熔盐钎剂对铝氧化膜作用过程的研究

Action of flux on the oxide film in aluminium brazing

银钎剂中氟化物对钎料铺展性的影响

Influence of fluoride on spreadability of filler metals in silver brazing fluxes

用氟化物钎剂钎焊6063铝合金的试验研究

A Study on Brazing 6063 Aluminum Alloy with Fluoride Flux

含不同氟化物的银钎剂钎焊性能各异。

Different fluoride silver brazing fluxes have different brazing behaviors .

钎剂成分对光束钎焊工艺性的影响

Brazing flux influence on processing properties of light beam brazing

我国航空焊接材料主要是指电焊条、焊粉和钎剂。

Aero-welding material means the materials of welding electrodes , powder and fluxes .

铝钎剂中活性剂的研究

Investigation of Active Agents in the Aluminum Brazing Fluxes

无钎剂钎焊技术的最新发展现状

Analysis for the latest advance of brazing technique without use of brazing flux

电解低钛铝制备铝硅合金的疲劳裂纹扩展行为有机金属型铝用无铅低温软钎剂的试验

Fatigue Crack Growth Behavior in the Al-Si Alloys Prepared Using Electrolytic Low-titanium Aluminum

纳米无腐蚀铝钎剂的制备方法研究

Study on the preparation of nano-aluminium flux material

6063铝合金氧化膜与CsF-AlF3及KF-AlF3钎剂的反应机制

Mechanism of CsF-AlF_3 and KF-AlF_3 fluxes reacting with oxide films of 6063 aluminum alloy

新型无腐蚀性铝钎剂

A new type of non-corrosive aluminum brazing flux

银钎剂的改性处理木材阻燃处理工艺

THE RESEARCH OF MODIFICATIONS FOR SILVER BRAZING FLUXES Fire retardant treatment process of wood materials

高温铝钎剂的选择

Selection of fluxes for aluminum brazing

钎剂对铝合金与不锈钢大气钎焊性影响的二重性

Duality of Influence of Flux on Brazing Property Between Aluminum Alloys and Stainless Steel in Air

无钎剂软钎焊技术可以从根本上解决因钎剂的副作用而带来的一系列问题。

Fluxless soldering can solve a series of problems caused by the side effect of flux essentially .

介绍了各种焊接方法的优缺点以及钎料、钎剂的开发进展。

The advantages and disadvantages of various welding methods and development of filler metals and fluxes are introduced .