金属塑料

金属塑料金属塑料
  1. 分析了影响EMP轴瓦表面油膜厚度的主要因素,给出了油膜厚度的一般表达式,实验证明:弹性金属塑料瓦必须进行瓦面修型;

    This paper analyzed the main factors Which affected the oil film thickness of EMP thrust pad , giving the general equation of oil film thickness .

  2. 采用ADINA(T)程序计算水口巴氏合金瓦和三峡弹性金属塑料瓦推力轴承和镜板推力头的热弹性变形,并对轴承性能的计算结果和测量结果进行了对比分析。

    The thermo elastic deformation ( TED ) of the thrust bearing and runner was analyzed based on ADINA ( T ) program .

  3. 和传统的钨金瓦相比,弹性金属塑料瓦(下文简称EMP瓦)具有运行可靠、性能优良、工况灵活、安装方便及经久耐用等优点。

    Compared with Babbitt pads of thrust bearing , the elastic metallic-plastic pads possess the combination of reliable running , excellent performance , flexible operation , convenient installation and long service life .

  4. 通过对完成磨损试验后的弹性金属塑料(EMP)试样表面轮廓的测量与计算,获得EMP材料的磨损表面轮廓具有分形特性。

    It is concluded that the wearing surfaces of elastic-metallic-plastic ( EMP ) composite specimens , which have been tested on MPX-2000 , have fractal characteristics by measuring and calculating surface profile of EMP .

  5. 研究了稀土元素处理玻璃纤维填充金属塑料多层复合材料在冲击载荷、干摩擦条件下的摩擦和磨损性能,并利用扫描电子显微镜(SEM)对磨损表面进行了观察和分析。

    The friction and wear properties of metal plastic multilayer composites were investigated under impact load and dry friction conditions . The composites were filled with glass fiber with or without rare earth treatment . The worn surfaces were observed and analyzed by scanning electron microscopy ( SEM ) .

  6. 弹性金属塑料瓦(EMP)径向滑动轴承是一种新型的轴承,由于轴瓦所采用的复合材料的特殊性使得其弹性变形和热变形将会远大于传统的金属瓦轴承。

    EMP ( Elastic Metal Plastic ) circular sliding bearing is a new type of bearing . Since special properties of synthetic material use in pad , the elastic deformation and thermo - deformation will be larger than that of traditional bearing with metal pad .

  7. DF-3弹性金属塑料瓦是以聚四氟乙烯为摩擦表面层,以金属丝垫为中间层,通过特殊工艺牢固结合为一体,并通过一定的工艺过程与瓦基钎焊而成的一种推力轴承。

    DF-3 Elastic metal-plastics thrust washing is a composite bearing that takes filled PTFE as overlay , metal wire as interlayer and connects them with steel bases by means of a special welding method .

  8. 结合等磨损率图分析发现,当载荷小于1515N而滑动速度小于3.52m/s时,弹性金属塑料复合材料的磨损率相对较低;

    By analyzing the isogram of wear rate for EMP steel pair , it was found that a lower wear rate of EMP was registered at a load below 1515N and a sliding speed below 3.50m/s .

  9. 弹性金属塑料轴瓦材料蠕变理论模型研究

    Research on Creep Theoretical Model of Elastic - Metal-Plastic Bearing Pad

  10. 立式水轮发电机水导弹性金属塑料轴瓦的设计

    Design of Elasto-Metal Plastic Water Pilot Bearing in Vertical Hydraulic Generator

  11. 烧结钢金属塑料摩擦磨损性能的研究

    A Study on Friction and Wear Behavior of Sintering Steel Plastics

  12. 弹性金属塑料推力轴承瓦的设计与运行

    Plain bearings-Bimetallic bushes with plastic overlay Design and Operation of EMP-Segments

  13. 弹性金属塑料轴瓦压缩性能的实验研究

    Experimental Study on Compressive Performance of Elasto Metal Plastic Bearing Pad

  14. 弹性金属塑料轴瓦的特性及应用展望

    Properties and Application Prospects of Elasto - Metal Plastic Sliding Bearing

  15. 弹性金属塑料轴承润滑机理的特点与改进方向

    Characteristics of lubricating mechanism of elastic metal-plastics bearing and its improvement

  16. 弹性金属塑料推力轴承材料起停磨损性能的研究

    Start / Stop Wear Properties of Elatic Metal-Plastic Composite Thrust Bearing

  17. 金属塑料复合材料减振耐磨性能的试验研究

    Test Research on Vibration and Anti-wear Behaviors of Metal-plastic Compound Materials

  18. 苏联弹性金属塑料推力轴瓦运行总结

    The Operation of the Soviet Thrust Bearing Pads from Spring Metal-plastic

  19. 弹性金属塑料瓦在生产和运行中的一些问题

    Some problems of elastic metal plastic tile in the production and operation

  20. 弹性金属塑料磨损表面的分形特性研究

    Study on Fractal Characteristics of Wearing Surface of Elastic-Metallic-Plastic Composites

  21. 金属塑料复合管材的应用与面临的问题

    Application of Metal - Plastics Composite Pipe and Problems It is Facing

  22. 油润滑条件下弹性金属塑料复合材料的摩擦磨损特性研究

    Study on the Tribological Properties of Elastic-Metallic-Plastic Composite under Oil Lubrication Condition

  23. 国产大型重载弹性金属塑料椎力瓦的应用

    Application of Large size Elastic Plastic metal Thrust Bearings Made in China

  24. 水轮发电机组全弹性金属塑料轴瓦的运行

    Operating of Hydrogenerator Unit with all Elastic Metal Plastic Pad

  25. 弹性金属塑料导瓦在大型水轮发电机上的应用

    Application of Elastic Metallic Plastic Pad to Large Hydrogenerators

  26. 弹性金属塑料瓦的应用和发展

    The Use and Development of Elastic Metallic Plastic Segments

  27. 我国第一台弹性金属塑料瓦推力轴承运行良好

    Good Operation of the First in China Thrust Bearing with Elastic Metal-plastic Pads

  28. 弹性金属塑料在立式水轮发电机水导轴承中的应用研究

    On Application of Elasto-metal Plastic Pad to Water Pilot Bearing of Vertical Hydro-generator

  29. 建立并分析了它们的表面分形维数与磨损率的对应关系,认为改善润滑条件和控制对摩偶件表面形貌是降低弹性金属塑料复合材料与钢对摩时磨损率的主要途径;

    The relation between wear rate and fractal dimension were established and analyzed .

  30. 浅谈弹性金属塑料轴瓦的运行与检修

    The Operation and Overhaul of Elastic Metallic Plastic Pad