过热

guò rè
  • superheat;superheating;excessive heating;generation of excess heat;overheat;seek quick success and instant benefits
过热过热
过热 [guò rè]
  • (1) [overheat]∶加热过分,特指将金属加热到很高的温度,以致晶粒构造变粗到不希望但还未到不可补救的程度

  • (2) [seek quick success and instant benefits]∶比喻事物发展速度太快,规模太大

  • 1985年到1988年我国经济发展上了一个台阶,但也有过热现象

过热[guò rè]
  1. 基于BP网络的锅炉过热汽温系统动态特性的辨识

    ANN Based Dynamic Performance Identification for Superheat Steam Temperature of Boiler

  2. 电厂过热汽温控制系统的改进及其PID鲁棒整定

    Redesign of Superheat Steam Temperature Control System and Its PID Robust Tuning

  3. 活动部件的摩擦使发动机过热。

    Friction between moving parts had caused the engine to overheat .

  4. 当指针进入红色区域时,发动机就过热了。

    When the needle enters the red zone the engine is too hot .

  5. 最关键的是不要让液体过热。

    It 's vital not to overheat the liquid .

  6. 离合器因过热而失灵了。

    The clutch has burnt out .

  7. 发动机过热了。

    The engine is overheating .

  8. 发动机过热,车子不好操纵。

    The engine was overheating and the car was not handling well

  9. 私营企业的开支急剧增长造成经济发展过热。

    The private sector is increasing its spending so sharply that the economy is overheating

  10. 系统过热,拍摄工作只好停了下来。

    The system overheated and filming had to stop

  11. 经济过热须降温。

    The overheating economy needs cooling down .

  12. 随着物价日益上涨、资产泡沫膨胀,很多新兴国家经济已经过热

    Many are already overheating , with prices rising and asset bubbles inflating .

  13. 温控方式数字显示,PID调节,过热保护。

    Temp control Digital display , PID control , heat-triggered protector .

  14. 过热处理对人类食管癌细胞及中国仓鼠细胞DNA修补能力的抑制作用

    Inhibition of DNA repair ability of human esophageal cancer cell and CHO-K1 cell by hyperthermia

  15. 基于DSP的过热蒸汽温度的控制系统的设计

    The Design of the Superheated Steam Temperature Control System Based on DSP

  16. 基于改进型PSO算法的过热汽温PID参数优化

    The Improved PSO-based Algorithmic PID Parameters Optimization of Main-steam Temperature Control

  17. 稀土变质与液态过热对共晶Al-Si合金凝固组织的影响

    Effect of RE modification and superheating treatment on eutectic Al-Si alloy

  18. 逆变焊机中IGBT散热及过热保护技术的研究

    Research on the Techniques for IGBT Radiating and Overheat Protection of Inverter Welder

  19. 采用氟盐与过热铝反应,在不同的工艺条件下制取AlTiB中间合金。

    Al - Ti - B master alloys were prepared by the reaction of complex halide salts with molten aluminum in different technological conditions .

  20. 对迅速降压中的CO2的亚稳态平衡特性进行分析,研究CO2过热液的成核机理。

    The metastable characteristics of decompression CO2 in depression were analyzed and the nucleation mechanism in CO2 superheating liquid was explored .

  21. 熔体过热处理对Al-Si过共晶合金凝固组织及耐磨性的影响

    The Effect of Melt Overheating Treatment on the Microstructure and Wear Resistance of AL-Si Hypereutectic Alloys

  22. 熔体过热处理对Al-Cu合金熔体结构和定向凝固组织、性能的影响

    Influence of Melt Superheat Treatment on Melt Structure , Microstructure and Performance of Directionally Solidified Al-Cu Alloy

  23. 由于焊接过程中镁的过热蒸发,导致焊缝相对含Al量升高,共晶体含量增多,从而使焊缝热裂纹倾向增大。

    Due to the super heated vaporization of Mg atom during welding , the Al content and eutectic content in the weld increase , resulting in the increase of hot crack tendency in the weld .

  24. 熔体过热温度及浇注温度的不同将较大程度的影响AlTiB中间合金中TiAl3及TiB2的形态大小及分布。

    The superheating temperature of aluminum melt and pouring temperature have a large effect on the morphology , size , distribution of TiAl_3 and TiB_2 in the Al-Ti-B master alloy .

  25. 本文将基于可变模型的阶梯式预测控制运用于火电厂过热汽温控制中,并用C语言实现了上位机软件包,在大范围工况取得了稳定优良的控制效果。

    This paper applies the stair-like predictive control based on variable models to superheated steam temperature control in thermal plant , and makes the software with C. Simulation results show that the software gets a good performance under different power conditions .

  26. 220kV输电线路耐张线夹过热原因分析

    Analysis on Superheat for Anchor Clamp of 220 kV Transmission Line

  27. 以此为基础,利用合理的散热设计和过热保护电路,设计并实现了一套UHF宽带固态大功率放大器。

    On this basis , by using logical cooling means and superheat protect means , we design and implement a UHF broadband solid-state high power amplifier .

  28. 通过对网络访问日志的挖掘,获取关联网络节点信息和过热节点信息等,并利用挖掘出来的知识指导Chord网络的运行,从而改进网络性能。

    We can get information of related websites and hot-spots by mining network log files and apply mined knowledge on instructing the operation of Chord network to improve network performance .

  29. 600MW发电机电流互感器长期正常工作的过热原因及对策

    600 MW Thermal Generators on Current Transformer Normal Work of the Long-term Causes of Overheating and Countermeasures

  30. 严格控制供水水质,将锅炉水的pH值控制在8.5~9.5,并严格各项工艺操作,第一、二节热器的使用寿命一般可在10年以上,锅炉盘管、过热盘管可在15年以上。

    The service life of both 1st and 2nd sections of the boiler can be extended to over 10 years if the feed water quality is strictly controlled , pH value is limited to 8.5 ~ 9.5 and the operation is improved .