超音速火焰喷涂

Ti-Ni-C系反应超音速火焰喷涂合成研究

Study of reactive high velocity oxygen fuel spraying for Ti-Ni-C coatings

反应超音速火焰喷涂TiC-TiB2-Ni涂层的组织性能

Microstructure and property of reactive high velocity oxygen fuel spraying TiC-TiB_2-Ni coatings

超音速火焰喷涂Fe基非晶合金涂层的性能研究

Properties of Iron Base Amorphous Alloy Coatings by High Velocity Oxy-fuel Spraying

空气助燃超音速火焰喷涂WC涂层的性能及应用

Properties and Application of WC Coating Prepared by High Velocity Air Fuel

超音速火焰喷涂WC涂层替代电镀硬铬：疲劳和摩擦磨损性能

WC coatings as candidate to hard chrome plating : characterization of fatigue and friction and wear

超音速火焰喷涂WC-Co涂层结构的研究

Study of structure of WC-Co coatings sprayed by high velocity flame

Ni对超音速火焰喷涂合成TiC-Ni涂层组织和耐磨性能的影响

Influence of Ni on the Microstructure and Wear Resistant Properties of Reactive High Velocity Oxy-fuel Flame Spraying TiC / Ni Coatings

超音速火焰喷涂（HVOF）技术的发展与工艺特点

Development and characteristics of high velocity oxygen-fuel ( hvof ) spray

超音速火焰喷涂（HVOF）具有涂层致密及结合强度高等特点。

High velocity oxy-fuel ( HVOF ) sprayed coating is characterized as dense and high bonding strength .

超音速火焰喷涂Al-Cu-Cr准晶涂层表面不粘性和耐磨性的研究

Surface Non-Sticking and Wear-Resisting Properties of High-Velocity Oxy-Fuel Sprayed Al-Cu-Cr Quasicrystalline Coatings

Ni对Ti-Ni-C体系SHS反应中的热力学与动力学均有重要影响，Ni在超音速火焰喷涂合成中的作用尚不明确。

Nickel plays an important role to the thermodynamics and reaction dynamics in self-propagation high temperature synthesis reactions , but little is currently available on the action of nickel in high velocity oxy fuel flame spraying ( HVOF ) .

利用超音速火焰喷涂（HVOF）和大气等离子喷涂（APS）工艺分别喷涂了雾化（微米结构的）以及球磨（纳米结构的）Fe-Al粉末制备了不同结构的涂层。

FeAl coatings having essentially different microstructures were prepared by spraying the atomized ( microcrystalline ) and milled ( nanocrystalline ) Fe-Al powders using high velocity oxy-fuel ( HVOF ) and atmospheric plasma spraying ( APS ) techniques .

利用球磨方法得到用于喷涂的、粒度约40μm的硫化亚铁（FeS）微颗粒，再用超音速火焰喷涂的方法在45钢表面制备了固体润滑硫化亚铁涂层。

The powder of FeS , with granularity of 40 μ m for spraying , was prepared by ball-mill method , and then the FeS powder was sprayed by ultrasonic flame spraying to form the solid lubrication FeS coating on the 45 steel surface .

本文采用CH-2000超音速火焰喷涂（HVOF）系统以不同结构的金属陶瓷粉末制备涂层，分析了涂层的组织结构和耐磨粒磨损性能，探讨了涂层组织结构对涂层耐磨性能的影响。

Cermet coatings were deposited by high velocity oxy-fuel ( HVOF ) spraying system ( CH-2000 ) using powders in different microstructure . The microstructure and abrasive wear resistance of the as-sprayed coatings were examined . The effect of microstructure on wear performance was investigated .

超音速火焰喷涂涂层评析

Evaluation and Analysis of High Velocity Oxygen Flame Sprayed Coatings

多功能超音速火焰喷涂的燃烧特性研究

Combustion Characteristics of Multi-Function Oxygen Fuel Spraying with Supersonic Velocity

基于超音速火焰喷涂技术的冷喷涂技术实现与流场分析

Cold Spray Realization and Flow Analysis on the High Velocity Flame Spraying System

超音速火焰喷涂的火焰速度特性

Characteristics of the Flame Velocity of Supersonic Flame Spraying

本文介绍了超音速火焰喷涂系统的火焰特性。

In this paper , the characteristics of supersonic spraying system is investigated .

送粉参数对超音速火焰喷涂粒子速度与温度的影响

The influence of injecting parameters on supersonic flame spraying particle velocity and temperature

表面熔融粒子结构对超音速火焰喷涂层结合性能的影响

Effects of Surface Melting Particles on Adhesion of Cermet Coatings by High Velocity Oxy-Fuel Spraying

超音速火焰喷涂技术研究进展

Development of Hypersonic Flame Spraying Technology

超音速火焰喷涂加工工艺在化工行业动密封环上的应用

Application of high velocity oxy-fuel ( hvof ) spraying process to moving sealing ring in chemical industry

柱塞表面的强化采用超音速火焰喷涂技术。

An ultrasonic flame spraying technology is adopted for the reinforcement of the surface of the plunger piston .

超音速火焰喷涂作为热喷涂领域的新技术具有粒子飞行速度高，涂层质量好等优点。

High velocity thermal spraying as a new technology has the characters of high velocity and high quality .

超音速火焰喷涂工艺参数对镍基涂层结构和性能的影响

Effect of Technical Parameters of High Velocity Oxygen Fuel Spraying on the Structure and Properties of Nickel Alloy Coatings

超音速火焰喷涂及封孔处理对低合金钢抗中性盐雾腐蚀性能的影响

Effect of High-Velocity-Air-Flame Spraying and Sealing with Silicon-Fluorine Resin on Corrosion Resistance of Low Alloyed Steel in Neutral Salt Fog

常用的热喷涂方法有火焰喷涂、电弧喷涂、等离子喷涂、爆炸喷涂、超音速火焰喷涂，其中，等离子喷涂、超音速火焰喷涂、电弧喷涂的市场比例越来越大。

Among them the market shares of plasma spray-ing , explosion spraying , ultrasonic flame spraying and arc spraying are increasing steadily .

介绍了气体爆炸喷涂，超音速火焰喷涂和超音速等离子弧喷涂等高能高速热喷涂工艺的发展、原理、特点及其应用。

The development , principle , character and application of high energy and high speed heat spraying including gas detonation spraying , high velocity oxygen-fuel spraying and hypersonic plasma spraying were introduced .

在喷涂工艺方面，制备管道涂层的方法主要有火焰喷涂、电弧喷涂、等离子喷涂、超音速火焰喷涂等。

In the aspect of thermal spraying processes the main techniques applied to water wall tubes include flame spray , arc spraying , plasma spray and high velocity oxy-fuel spray ( HVOF ) .