薄膜太阳能电池

  • 网络Thin Film Solar Cell;CIGS;OPV;TFSC
薄膜太阳能电池薄膜太阳能电池
  1. 铜铟镓锡(CIGS)电池作为最有前景的新一代薄膜太阳能电池产品,由于其转换效率较高、制作成本较低、没有性能衰减等优良特性而受到了广泛的关注。

    As the most promising and new generation thin film solar cell product , CIGS is widely concentrated due to its advantages of high conversion rate , low production cost , no performance degradation , etc.

  2. 此外,实验上制备出玻璃/ITO/CdS/CdTe/Cu金属背电极薄膜太阳能电池,并得到了一些有益的结果。

    A Glass / ITO / CdS / CdTe / Cu thin film solar cell is also prepared in the thesis .

  3. Nd∶YAG激光器切割硅薄膜太阳能电池的工艺参数研究

    Research of technical parameters of Nd ∶ YAG laser scribing silicon film solar cell

  4. 非晶硅(a-Si)薄膜太阳能电池是取之不尽的洁净能源&太阳能的光电元(组)件。

    Large-area a-Si solar cell in a photoelectric element served as a clean and limitless energy source .

  5. 二硫化铁(Pyrite)薄膜太阳能电池材料的制备及展望

    The Fabrication of Pyrite ( FeS_2 ) Thin Films for Solar Cell and Their Prospects

  6. SnS2/SnS薄膜太阳能电池的制备与性能研究

    Preparation and performance of SnS_2 / SnS thin film solar cells

  7. 碲化镉(CdTe)和硫化镉(CdS)是制造薄膜太阳能电池的常用半导体材料。

    Cadmium telluride ( CdTe ) and cadmium sulfide ( CdS ) are common semiconductor materials used in thin film solar cells .

  8. 首先,根据建筑膜材PVDF与柔性薄膜太阳能电池两者的力学特性提出了两种不同的复合方式。

    First , according to the mechanical properties of membrane PVDF and flexible thin-film solar cells to proposed two different composite mode .

  9. CIGS薄膜太阳能电池之单靶溅镀制程及应用

    Production process and application of in-line sputter for CIGS thin film solar cells

  10. n-CdTeSchottky势垒薄膜太阳能电池中嵌入p型层对其势垒高度影响的计算机模拟

    Computer Simulation for the Effects of Inserted p Type Layer on Barrier Height of n CdTe Schottky Barrier Thin Film Solar Cell

  11. CIGS薄膜太阳能电池材料的制备、结构及性能研究

    Preparation , Structure and Properties of the CIGS Thin Films Solar Cells ' Materials

  12. 本文利用直流磁控溅射技术研究了应用于硅基薄膜太阳能电池前电极上的掺铝氧化锌(AZO)透明导电薄膜的制备和性能表征。

    AZO thin films were grown by DC magnetron sputtering and characterized for its applications in Si-based thin film solar cells as the front electrode .

  13. 为了推进CIGS薄膜太阳能电池的商业化进程,需要开发大面积和低成本的薄膜沉积方法。

    In order to developing commercial production , a large-scale and low-cost deposition method is needed .

  14. 随着无定形硅(简称a-Si)薄膜太阳能电池的诞生,非晶硅科技已转化为一支大规模的产业。

    With the appearance of amorphous silicon ( abbreviated from " a-Si ") thin film solar cells , amorphous technology has changed into a large-scale industry .

  15. 本论文综述了太阳能电池的研究现状,在讨论了各种太阳能电池结构与太阳能电池材料的基础上,提出了FeS2量子点敏化TiO2多孔薄膜太阳能电池的设想。

    In the thesis , the principle and structure of different kinds of solar cells were reviewed . The pyrite QDs sensitized TiO2 photoelectrode was proposed .

  16. 通过摸索和优化溴-甲醇化学蚀刻条件,作者制备出了光电转换效率为12.4%的CdTe薄膜太阳能电池。

    Through the exploration and optimization of bromine-methanol chemical etching conditions , the author has produced a CdTe thin film solar cell with 12.4 % conversion efficiency .

  17. 全球太阳能利用技术称为铜铟镓硒(CIGS)将其薄膜太阳能电池。

    Global Solar uses a technology known as copper indium gallium selenide ( CIGS ) to make its thin-film solar cells .

  18. CIGS薄膜太阳能电池因其转换效率高、成本低等优点,成为最具有发展潜力的一种太阳能电池。

    CIGS thin film solar cell is one of the most potential development solar cells , forit high efficiency and low costs .

  19. 本文主要做了如下方面的研究工作:对CIS薄膜太阳能电池缓冲层CdS的传统制备工艺作了说明。

    There are several aspects discussed in this thesis : The thesis made the elucidation to the traditional manufacturing methods of the CdS buffer layers of CIS ( CIGS ) thin film solar cells .

  20. CIGS吸收层的研究对制备高质量的薄膜太阳能电池尤为重要。

    The study of the CIGS absorb layer is the key part for the fabrication of high quality CIGS thin film solar cells .

  21. 染料敏化太阳能电池(Dye-SensitizedSolarCell,DSSC)属于第三代新型薄膜太阳能电池。DSSC由光阳极、电解液和对电极三部分组成。

    Dye-sensitized solar cell ( DSSC ) is one of the third generation thin film solar cells , which is composed of a photoanode electrode , electrolyte , and a counter electrode ( CE ) .

  22. 而在CIGS薄膜太阳能电池中,CIGS吸收层是关系到电池转换效率的关键。

    CIGS thin film is the most important structure in CIGS solar cells , which decides the conversion efficiency of the thin-film solar cells .

  23. 从制备方法、材料和结构的观点出发,概述非晶硅(a-Si)和多晶硅(poly-Si)薄膜太阳能电池研究的进展。

    Progress in amorphous Si ( a-Si ) and polycrystalline Si ( poly-Si ) thin film for solar cells is summarized here from fabrication method , material , and structural viewpoints .

  24. 在此基础上,探索了两种电极衬底制作CZTS薄膜太阳能电池的流程。

    Based on the above results , the CZTS thin film solar cells with two different electrode configurations have been attempted .

  25. 在硅基薄膜太阳能电池中,常使用透明导电氧化物(TCO)与金属组成的复合背反射电极,以增加对太阳光的收集效率,从而提高太阳能电池的转化效率。

    People often apply multi-layer back reflectors including transparent conducting oxides and metal to a-Si solar cells , which helps in collecting more sunlight and increasing the conversion efficiency of the solar cells .

  26. CIS系太阳电池是最有潜力的薄膜太阳能电池之一,但复杂、难控的CIS系吸收层薄膜的制备技术是其实现大规模产业化的瓶颈。

    CIS-based solar cells is one of the most promising thin film solar cells , but this type of solar cells has bottleneck in large scale industrialization for that the preparation technologies of CIS-based absorption layer are very complicated and less of controllable .

  27. 铜铟镓硒(CIGS)薄膜太阳能电池具有转换效率高、生产成本低、抗辐射性能强和弱光特性好等许多优点,是极具发展前景的薄膜太阳能电池之一。

    Copper indium gallium selenide ( CIGS ) thin film solar cell is one of the most promising solar cells for its high conversion efficiency , low cost , strong radiation resistance and excellent weak light response .

  28. 铜铟硒(CIS)或铜铟镓硒(CIGS)和硫化镉(CdS)是制造薄膜太阳能电池的非常优良的化合物半导体材料,CIGS太阳能电池有非常高的光电转化效率,目前已经达到19.9%。

    Copper indium diselenide ( CIS ) or copper indium gallium diselenide ( CIGS ) and cadmium sulfide ( CdS ) are both promising semiconductor compounds for fabricating thin film solar cells . CIGS solar cells have reached a very high photo-electric conversion efficiency of 19.9 % .

  29. 德国太阳能电池板制造商q-cells试图出售一家开发出创纪录的薄膜太阳能电池板技术的子公司,也在中国找到了买家。

    And when German solar-panel maker Q-Cells was trying to sell a subsidiary that had developed a record-breaking technology for thin film solar panels , it found a buyer in China .

  30. 硅薄膜太阳能电池背部反射结构设计

    Design of the Back Reflectors of Thin-film Silicon Solar Cells