胶黏剂

jiāo nián jì
  • adhesive;glue
胶黏剂胶黏剂
  1. 纳米Al2O3改性环氧胶黏剂和钢铁附着机理的研究

    Adhesion mechanism of steel and epoxy adhesive modified by nano-Al_2O_3

  2. 预聚物对UV固化胶黏剂性能的研究

    Study on Effect of Prepolymer on the Performance of UV Curing Adhesive

  3. API胶黏剂在麦秸刨花板上的应用

    The Application of API in Preparing Wheat Straw Particleboard

  4. 并且利用DSC研究了API胶黏剂的固化反应速率随温度变化的规律。

    The change of the curing rate with temperature for API adhesive was characterized by DSC analysis .

  5. PBT的固相增黏研究改性淀粉胶黏剂的研制

    PBT Solid-phase Viscosity Increasing Study on Modifying Starch Adhesive for Plywood Manufacturing

  6. 3M胶黏剂薄膜在航空粘接方面的应用

    The Application of 3 M Adhesive Film in the Adhesion of Aircraft

  7. 当增韧剂Q含量在15~20份(质量)时,固化剂在21~24份(质量)时,胶黏剂的剪切强度和剥离强度最佳。

    Shear strength and peel strength reached optimum value when the dosage toughening agent Q is 15-20 parts and curing agent is 21-24 parts .

  8. CPVC改性SBS接枝胶黏剂的研制

    Preparation of SBS Graft Adhesive Modified by CPVC

  9. KH-550改性纳米SiO2对环氧胶黏剂性能的影响

    Effects of KH-550 Modified Nano-SiO_2 on Property of Epoxy Adhesive

  10. 对水性高分子-异氰酸酯胶黏剂(API)主剂进行改性,以提高API的耐水、耐热及胶接硬木的性能。

    Aqueous vinyl polymer-isocyanate adhesive ( API ) was modified to improve its bonding strength , water - and heat-resistance when it was used for hardwood bonding .

  11. 可见,纳米TiO2的加入对环氧胶黏剂体系具有明显的增强作用。不同磁特性填料对环氧胶剪切强度的影响

    So it enhanced the mechanical properties of epoxy resin adhesive . Effect of fillers on the shear strength of epoxy adhesives exposed in magnetic fields

  12. 胶黏剂力学性能研究结果表明该体系在130℃固化5h,具有良好的耐热性和力学性能。

    The adhesive has good thermal-stability and mechanical property after curing at 130 ℃ for 5h .

  13. 对于FPC工业上应用的胶黏剂,目前市场上应用最多的有改性丙烯酸酯及改性环氧两大类。

    Currently the most popular adhesives applied to FPC industry are two categories modified acrylic and modified epoxy resins .

  14. 封端率对PTMG型聚氨酯胶黏剂性能的影响

    Effect of End - closing Rate on Performance of PTMG Polyurethane Plastic Adhesive

  15. 此外,用FTIR和光学显微镜对SPI胶黏剂内部结构进行了表征,初步分析了提高粘接强度和耐水性的机理。

    The structures were analyzed with FTIR and optical microscope , the mechanism was preliminarily studied to improve the adhesive strength and water resistance . 2 .

  16. 目前,SIS主要用于胶黏剂、压敏胶、粘合剂等行业,而SBS主要用于沥青改性、鞋底材料等。

    SIS was mostly used in adhesive , pressure sensitive adhesive and bonding agent , while SBS was mostly used in asphalt modifier and sole material .

  17. 介绍了木材用EPI胶黏剂的特点、粘接机理、在集成材应用中使用的参数控制以及最终检验方法。

    The characters , bonding mechanism , parameters control in glued laminated timber and final test method of EPI adhesives are introduced .

  18. 探讨了SiO2、PVA、固色剂、辅助胶黏剂和润滑剂等对彩色喷墨打印纸涂料流变性能的影响。

    The effect of SiO_2 , mordant , PVA ( polyvinyl alcohol ) and lubricant on rheological properties of the coating for color ink jet paper was discussed .

  19. 水性聚氨酯(WPU)胶黏剂是聚氨酯溶于水或分散在水中形成的胶粘剂。

    Waterborne polyurethane ( WPU ) adhesive is prepared by dispersing polyurethane particles in the media of water .

  20. 本文研究了改性热塑性聚氨酯(TPU)的制备、表征以及在胶黏剂中的应用。

    In this study , the preparation , characterization and adhesive application of modified thermoplastic polyurethane ( TPU ) were researched .

  21. 采用溶液聚合法合成了以BA、AN为主链结构的液态含羧基丙烯酸酯低聚物,并用其对双酚A型环氧树脂胶黏剂进行增韧改性。

    Liquid acrylate oligomers containing carboxyl groups with BA and AN as main chain structure were synthesized by solution polymerization , and used for toughening modification of bisphenol A epoxy resin adhesive .

  22. 顺-苯(M-S)型自交联乳液胶黏剂的研制

    Preparation of M-S Self-crosslinking emulsion adhesive

  23. 论文分析讨论了引发剂用量、羟基丙烯酸树脂含量,HEA含量等对胶黏剂性能的影响。

    Effect of content of initiator , content of hydroxy acrylic resin and content of HEA on properties of PUR were discussed .

  24. 运用Brabender黏度仪研究改性大豆分离蛋白(SPI)胶黏剂制备过程中的黏度变化,并对它们的黏合性进行了研究。

    The viscosity changes of modified soy protein adhesives during making them were studied with Brabender viscometer , and their adhesive properties were also researched .

  25. 聚氨酯胶黏剂(PU)由于综合性能优良而被广泛地应用于民用、体育、航天、军事等领域,成为不可缺少的重要材料之一。

    Polyurethane adhesive ( PU ) has become one of the important and indispensable materials because of the excellent overall performance and is widely used in civil , sports , aerospace , military and other fields .

  26. 基于前期对改性三聚氰胺-甲醛树脂(MF)的研究成果,以改性MF为胶黏剂,选取热压温度、单位压力和时间为试验因素,研究竹帘胶合板制造工艺。

    Taking modified MF and PF resin as the adhesive and using " cool-hot-cool " technology , this paper designs two groups of technological parameters of hot-pressing to press bamboo curtain plywood .

  27. 其中水性聚氨酯(PU)和水性聚丙烯酸酯(PA)同其它溶剂型产品相比,具有价廉,无毒,不污染环境等优点,在涂料、胶黏剂、皮革、织物涂层等方面得到广泛的应用。

    Compared with other solvent products , polyurethane ( PU ) and polyacrylate with these advantages of low price and no poison , so has been utilized widely in coating , adhesion , leather , textile coat etc.

  28. 第二代丙烯酸酯胶黏剂(SGA)由于具有室温快速固化和可进行带油表面的胶接等一系列优点,得到极大的推广应用。

    The second generation acrylate adhesives have been largely applied in the bonding field just because their advantages such as room temperature curing and suitable for oleic surface bonding .

  29. 针对大理石复合板的脱层问题,提出用活性碳酸钙粉改性台湾生产的饰面AB胶,自制性能稳定的胶黏剂。

    With regard to the lay separation of Calcium Carbonate composite plates , using the active Calcium Carbonate powder to modify the AB adhesive of Taiwan , a kind of adhesive substance with stable properties has been obtained .

  30. 介绍了以SBS为主体粘接树脂,氢化松香酯为增黏树脂,白油为增塑剂,无水乙醇为黏度调节剂的溶剂型丙纤滤棒专用胶黏剂的研制。

    Special propylene fiber adhesive for cigarette filter candle with SBS as main bonding resin , hydrogenated rosin ester as tack-producing resin , white oil as plasticizer and anhydrous ethanol as viscosity modifier was introduced in this paper .