聚酰亚胺薄膜

H级热固性聚酰亚胺薄膜粘带的研制

Preparation of a class H thermosetting adhesive tape of polyimide film

用X射线衍射法测定聚酰亚胺薄膜取向结构

The Determination of Orientational Degree of Polyimide Films by X-Ray Diffraction Method

利用全息-离子束刻蚀方法研制出了聚酰亚胺薄膜为衬底的金软X射线透射光栅。

Soft X-ray gold transmission grating with polyimide membrance substrate is fabricated by holograph-ion beam etching technique .

研究了高能电子束辐照对聚酰亚胺薄膜（PI）试样电气性能的影响。

The effect of high-energy electron beam radiation to electrical parameters of polyimide ( PI ) was studied .

聚酰亚胺薄膜电容栅FET湿度传感器的研制

Development of a polyimide film capacitive gate FET humidity sensor

SiO2-Al2O3纳米杂化聚酰亚胺薄膜的结构和性能

Analysis on Structure and Properties of SiO_2-Al_2O_3 Hybrid Polyimide Film

纳米粒子掺杂聚酰亚胺薄膜便是其中之一，人们发现掺杂后的PI薄膜在力学、热学以及电学性能都有所提高。

Nano particles doping polyimide film is one of them , people found the mechanics , heat and electrical properties of PI films doped are improved .

叙述了聚酰亚胺薄膜H级热固性粘带的制造过程及主要技术指标，讨论了测试结果和影响质量的主要因素；

This article introduces the preparing process of a class H thermosetting adhesive tape of poly ˉ imide film and main technology index . The main factors of effecting on the tape quality are discussed .

本文对Kevlar面板Nomex蜂窝夹层结构表面粘贴镀铜箔聚酰亚胺薄膜的工艺进行了研究。

This paper study the technology of kevlar / Nomex honeycomb sandwich sticking up copper facing polyimide film .

用SEM考察了聚酰亚胺薄膜的磨痕形貌和对偶Si3N4陶瓷球表面的转移膜的形貌。

The morphologies of the worn polyimide films and their transfer films on the counterpart Si 3N 4 ball surface were observed with a scanning electron microscope .

并对所获得的系列含羟基聚酰亚胺薄膜进行了傅立叶红外、DSC、TGA、紫外可见光、接触角、表面能、吸水率及机械性能表征。

The tests of DSC , TGA , FTIR , UV-visible transmittance , contacting angle , water absorption and mechanical performance were performed on the series of polyimide films . 3 .

以聚酰亚胺薄膜为靶子，用高电导硅作为衬底，KrF准分子激光器作为辐射光源，利用脉冲激光沉积技术制备出了类石墨薄膜，并以该薄膜为阴极对其进行了场致电子发射特性测试。

The graphite-like films were prepared on silicon substrate by using the pulsed KrF laser ablation of a polyimide target , and the field electron emission from the film was observed .

此外，采用溶胶-凝胶法制备了重量比分别为5%、10%、12.5%、15%和20%的Al2O3杂化聚酰亚胺薄膜，并对其相关的电参数进行了测量。

In addition , the Al2O3 hybrid polyimide films with the content of 5 % , 10 % , 12.5 % , 15 % and 20 % in weight ratio were prepared by sol-gel reaction , and then their electric parameters were measured .

用石英晶体微天平（QCM）原位监测并研究了聚酰亚胺薄膜在地面原子氧模拟装置中暴露时的质量变化。

The variations of mass changes of polyimide films during exposure in different flux of atomic oxygen ( AO ) beams which was a ground-simulated low earth orbit ( LEO ) space environment , were in-situ studied using QCM .

介绍了一种采用铜-聚酰亚胺薄膜多层基板的多芯片组件（MCM），它解决了高频下维持较低交调噪声带来的传输损耗增大，以及大量LSI芯片的同时切换噪声增大的问题。

This paper describes a multichip module having a copper-polyimide thin-film multiplayer substrate . This new substrate overcomes the problems of increased transmission loss at high frequencies while maintaining low crosstalk noise and the increased simultaneous switching noise with the large number of LSI chips .

电子束辐照聚酰亚胺薄膜的热刺激电流研究

Thermally stimulated current investigation of polyimide films irradiated by electron beam

激光感应聚酰亚胺薄膜表面电镀金属的研究

The Research of Electrical Plate on the Laser Induced PI Film

聚酰亚胺薄膜制备中温度的影响

The Effect of Process Temperature in the Production of Polyimide Film

激光诱导聚酰亚胺薄膜表面制备周期性纳米结构

Production of Periodic Nano - structure by Laser on Polyimide Surface

无机纳米聚酰亚胺薄膜耐局部放电测量及其特性研究

Measurement and Characteristic Study of Partial Discharge-Resistance of Inorganic-Nano Polyimide Films

纳米无机杂化聚酰亚胺薄膜的热激电流谱特性

Thermally Stimulated Current Spectrum Characteristics of Nano - Inorganic Hybrided Polyimide Film

方波脉冲电压下聚酰亚胺薄膜老化特征研究

Study on ageing characteristics of polyimide film under pulse voltages

高压力下聚酰亚胺薄膜热激电流的研究

Thermally Stimulated Current Study of Polyimide Film at High Pressures

本论文主要研究以聚酰亚胺薄膜为原料制备碳材料，通过层压、碳化等工艺，制备出表面光洁、完整的碳膜。

The preparation of carbon material derived from polyimide films have studied .

聚酰亚胺薄膜受γ射线作用后的电性能变化

Variation of electrical properties of polyimide films irradiated by γ - ray

影响聚酰亚胺薄膜热收缩率因素的探讨

Factors to Influence the Heat Shrinkage Radio of Polyimide Film

以聚酰亚胺薄膜为原料制备碳膜的结构与性能的研究

Study on Structure and Properties of Carbon Film Derived from Polyimide Films

1,4-双（2,4-二氨基苯氧基）苯的合成及其支化型聚酰亚胺薄膜

Synthesis of 1,4-Bis ( 2,4-diaminophenoxy ) benzene and Branched Polyimide Film Therefrom

聚酰亚胺薄膜中电荷输运机理和空间电荷特性

Charge Transport Mechanism and Space Charge Characteristic in Polyimide Film

聚酰亚胺薄膜流涎机自动调偏控制系统原理及设计

Theory and Design of Belt-tracking System of Casting Machine for Polyimide Film