聚乙烯纤维

  • 网络POLYETHYLENE;UHMWPE;Dyneema;UHMWPEF
聚乙烯纤维聚乙烯纤维
  1. 纳米SiO2改性超高分子量聚乙烯纤维的制备及其结构性能研究

    Preparation and studies on the structure and properties of ultrahigh molecular weight polyethylene / nano-sio_2 composite fibers

  2. 实现这种分子结构的方法是使用原子力显微镜的微悬臂(cantilever)从材料的溶液中缓慢拉出聚乙烯纤维细丝。

    This arrangement was done by slowly drawing a polyethylene fiber from a solution using the cantilever of an atomic force microscope .

  3. 利用粉煤灰和有机溶剂溶解的EVA混合在聚乙烯纤维基体上涂层,制备新型涂层导水纤维。

    The new water-conducting fiber made use of the fly ash and EVA solved by organic solvent , both of which were mixed together to coat on the PE fibers .

  4. 本文对不同铺层方式的碳纤维(CF)和高强聚乙烯纤维(UHMWPEF)混杂复合材料的力学性能进行测试,同时对UHMWPEF表面处理前后的混杂复合材料性能进行了比较。

    In this paper the mechanical properties of the different hybrid modes and UHMWPEF surface modification for CF / UHMWPEF composites are investigated through tests and comparison .

  5. 采用石蜡作稀释剂,用增塑熔纺的方法制备高强高模聚乙烯纤维(UHMWPE),弥补了传统凝胶纺存在的生产周期长、生产效率低的不足。

    The melt-spinning method has been used to produce high strength high modulus PE ( UHMWPE ) fibres ( paraffin wax as diluent ) . This method remedies the defects of long production period and low efficiency of the gel-spinning method .

  6. 研究了四种不同面密度的超高分子量聚乙烯纤维增强层合板(UFRP)的抗高速立方体破片侵彻的能力,并比较了四种不同面密度UFRP的吸能情况。

    Ballistic tests were performed to investigate the anti-penetration properties of ultra-high molecular weight polyethylene fiber-reinforced laminated plates ( UFRP ) against high-speed cubic fragments .

  7. 渔用超高分子量聚乙烯纤维绳索的研究

    Studies on ultra-high molecular weight polyethylene fiber ropes for fishing gear

  8. 超高相对分子质量聚乙烯纤维

    QUALITY Introduction to the Research of Ultra-high Molecular Weight Polyethylene Fiber

  9. 超高强高模聚乙烯纤维及其复合材料的研究进展

    Research progress of ultrahigh strength high-modulus polyethylene fiber and its composites

  10. 高性能聚乙烯纤维及其复合材料研究进展

    Review of high performance PE fiber and composite material application study

  11. 高强聚乙烯纤维的产业化及其复合材料应用

    Industrialization of High Strength Polyethylene Fibers and Applications of Their Composites

  12. 表面改性超高相对分子质量聚乙烯纤维的热性能研究

    Thermal Properties Study on Treated UHMWPE Fiber for Surface Modifying

  13. 超高分子量聚乙烯纤维性能及其应用

    Properties and application of ultra high molecular weight polyethylene fiber

  14. 铬酸处理的超高分子量聚乙烯纤维粘接性研究

    Study on adhesion of UHMWPE fiber treated by chromic acid

  15. 液态氧化法处理超高分子量聚乙烯纤维

    Surface Modification of Ultrahigh Molecular Weight Polyethylene Fiber by Chemical Etching Method

  16. 多级拉伸中超高相对分子质量聚乙烯纤维的结构与性能研究

    Study on Structure and Properties of Multistage Drawing UHMWPE Fiber

  17. 超高模量聚乙烯纤维复合材料的制备与性能研究

    Manufacture and properties of ultra high modulus polyethylene fiber composites

  18. 用于增强复合材料的聚乙烯纤维表面改性技术

    Surface Modification Technology of Polyethylene Fiber for Reinforced Composite Material

  19. 聚乙烯纤维增强有机玻璃复合材料性能影响因素的研究

    Study of influence factors on uhmwpe / pmma composite properties

  20. 超高分子量聚乙烯纤维蠕变性能改性研究

    Investigation on Modification of Creep Behavior of UHMWPE Fiber

  21. 聚乙烯纤维束温度和应变率相关性的实验研究

    Effect of temperature and strain rate on tensile properties of PE fibre bundles

  22. 超高分子量聚乙烯纤维表面处理

    Surface treatment of ultra - high molecular PE fiber

  23. 超高分子量聚乙烯纤维级专用料的开发

    Development of special ultra-high molecular weight polyethylene fiber-grade material

  24. 超高强度聚乙烯纤维复合材料表面改性研究

    Study on surface modification of ultra-high strength polyethylene composite

  25. 超高分子量聚乙烯纤维紫外接枝处理

    Uv - photo initiated grafting treatment of UHMWPE Fibers

  26. 超倍拉伸是制备高强高模聚乙烯纤维的有效途径。

    Ultra-drawing is an effective method to obtain high strength high modulus polyethylene fibers .

  27. 聚乙烯纤维-聚乳酸复合材料修复兔跟腱的研究

    Study on polyethylene fiber and poly-lactic acid complex in repairing of rabbit achilles tendon

  28. 新型防弹材料&超高分子量聚乙烯纤维

    New ballistic material ultra-high molecular weight polyethylene fiber

  29. 凝胶质量分数对超高分子质量聚乙烯纤维加工及结构性能的影响

    Effect of Gel Concentration on the Processing and Structure and Property of UHMWPE Fibers

  30. 常压等离子体设备对高模量聚乙烯纤维的表面改性

    Surface Modification of Ultra High Modulus Polyethylene Fibers by an Atmospheric Pressure Plasma Jet