聚丙烯

含PEPA/纳米Al（OH）3的膨胀型阻燃聚丙烯研究

Study on PEPA / Nano-Al ( OH ) _3 Intumescent Flame Retardant Polypropylene

N型和CS-Ⅱ型催化剂在聚丙烯生产中的应用

Applications of N - type and CS - ⅱ type catalysts in the production of polypropylene

N型高效催化剂在小本体聚丙烯装置上的应用

Application of n-type high efficiency catalyst for bulk polymerization of propylene

N型催化剂合成聚丙烯的物理性能与机械性能

Physical and mechanical properties of PP synthesized with N catalyst

CO2硬化聚丙烯酸钠树脂砂的研究

A Study on Na-polyacrylate Sand Process Cured by CO_2 Gas

利用水溶性的染料（结晶紫和罗丹明B）对接枝后的聚丙烯板进行了染色，并测定了吸收光谱和荧光光谱。

Certain water-soluble dyes ( crystal violet and rhodamine B ) showed a strong affinity for the grafted surface .

聚丙烯酸酯/TiO2复合粒子对PVC性能的影响

Influence of Polyacrylates / TiO_2 Composite Particle on Property of PVC

聚丙烯孔洞型铁电驻极体薄膜的压电性研究单层及多层PP蜂窝膜驻极体的压电性

Piezoelectricity of single-layer and multi-layer cellular polypropylene film electret

聚丙烯（PP）纤维表面改性技术

Research Progress in Surface Modification Technology of PP Fiber

聚丙烯酸酯乳液和硅酸钠处理木质素与PVC的共混

Blending of PVC and Lignin Treated with Sodium Silicate and Emulsion of Polyacrylate

聚乙烯（PE）、聚丙烯（PP）是非常有用的热塑性材料。

Polyethylene ( PP ) and Polypropylene ( PP ) are widely used thermoplastic materials .

壳聚糖·聚丙烯酸配合物半互穿聚合物网络膜及其对pH和离子的刺激响应

Chitosan · polyacrylic acid complex forming semi interpenetrating polymer network membrane and its stimulating response for pH and ions

采用羟丙基甲基纤维素（HPMC）和聚丙烯酸树脂将维生素C制成薄膜衣片。

The Vitamin C coated tablets have been prepared using HPMC and eudragit II .

通过共混复合的方法制备出具有抗静电性能的聚丙烯（PP）。

Antistatic polypropylene ( PP ) was prepared by means of blending PP with antistatic agent .

研究了聚丙烯（PP）的不同加入量对竹材/塑料复合刨花板性能的影响。

Effects of polypropylene ( PP ) content on properties of bamboo / plastic composite particleboard were researched .

用毛细管流变仪和DSC方法研究了马来酸酐接枝改性的聚丙烯（PPgMA）对PP/PPgMA共混体系流变性和热行为的影响。

The effect of PP-g-MA on rheological behaviour and thermal properties has been studied with capillary rheometer and DSC method .

硬质PVC门窗异型材用聚丙烯酸类（ACR）抗冲击改性剂

Acrylic Impact Modifier for R-PVC Door and Window Profiles

将功能化聚乙烯蜡/有机蒙脱土插层复合母粒与聚丙烯（PP）共混，制备了有机蒙脱土填充的聚丙烯。

Organic montmorillonite filled polypropylene was prepared by blending functionalized polyethylene wax organic montmorillonite intercalated master batches with polypropylene .

高SiO2含量硅溶胶/聚丙烯酸酯复合乳液的制备

Preparation of compound emulsion of high SiO_2 sol / polyacrylate

纳米SiO2增韧增强聚丙烯的界面效应与逾渗行为

Interfacial effects and percolation behavior in silica nanoparticles filled polypropylene

聚丙烯（PP）/纳米SiO2复合材料的流变行为、力学性能和相态学研究

Rheological Behavior , Mechanical Property and Morphology of Polypropylene ( PP ) / nano-SiO_2 Composite Materials

短切玻纤增强聚丙烯保持了聚丙烯（PP）的优点，性能已达工程塑料的水平。

Short glass fiber reinforced polypropylene maintains the advantages of polypropylene and its properties reach the level of engineering plastics .

用广角X射线衍射、小角X光散射等手段对硬弹性聚丙烯中排状堆积片晶的形成及结构进行了研究。

The formation and the structure of the unique piled lamellae rows in hard elastic polypropylene have been studied by WAXD and SAXS techniques .

用马来酸酐（MAH）对聚丙烯（PP）进行接枝改性，制得改性PP膜。

It modified the PP through grafting MAH onto PP , and then prepared the modified PP film .

纳米SiO2增强增韧聚丙烯界面模型的研究

Interfacial Model of Nano-SiO_2 Reinforced and Toughened PP

选用轻质聚丙烯（PP）粉末作芯材，在其表面化学镀覆Ni-Cu-P合金，制备出复合导电粉末并进行了测试。

A compound electric powder of electroless Ni-Cu-P plating on polypropylene was prepared .

聚丙烯（PP）由于具有价格低、原材料丰富、力学均衡性好、耐化学腐蚀等特点，近年来成为最热门的汽车零部件材料。

For many advantages of polypropylene ( PP ), so it is become the best part material for auto in recent years .

叙述了聚丙烯（PP）的透明改性方法和机理，并分析了透明改性剂对PP性能的影响。

Methods and mechanism of modification of transparence of polypropylene were described , and effects of transparence modifiers on properties of polypropylene were analysed .

用SEM研究了不同组分对胶粘剂微观形貌的影响，用DMA研究了聚丙烯酸酯的改性对胶粘剂的阻尼性能的影响。

Influence of different composition on adhesive micromorphology was studied by SEM and addition of polyacrylate on damping performance by DMA .

POE与聚丙烯的共混

Blending of POE and Polypropylene