聚氨酯

jù ān zhǐ
  • polyurethane;Flexane;Flexurane
聚氨酯聚氨酯
聚氨酯[jù ān zhǐ]
  1. 类似聚氨酯和PVC革的动物皮革替代品或许已经解决了时装业的动物虐待问题,但它们并非最环保的方案。

    Animal leather alternatives like Polyurethane and PVC leather may have solved the fashion industry 's animal cruelty problem , but they are not the most environmentally friendly solutions .

  2. UV固化聚氨酯丙烯酸酯预聚体的合成及其性质

    Preparations and property of UV curable polyurethane acrylates prepolymer

  3. 介绍了一种无游离异氰酸酯基聚氨酯胶粘剂的制备方法,采用端环氧基聚氨酯为A组分,多胺化合物为B组分。

    A method for preparing a polyurethane adhesive without free isocyanate monomer is introduced .

  4. 制备了含有品红颜料的喷墨印花用聚氨酯丙烯酸酯油墨的UV固化油墨为。

    UV ink , containing magenta pigment in ink-jet printing , was prepared .

  5. 热塑性聚氨酯弹性体主要由含OH的低聚物多元醇、小分子扩链剂和异氰酸酯等原料聚合而成。

    Thermoplastic polyurethane elastomers are prepared with polyol ester containing OH , isocyanate and a chain extender .

  6. 选用聚合物H和改性异氰酸酯K为主要原料合成聚氨酯灌封胶。

    Polyurethane ( PU ) pouring sealant was synthesized with polymer H and modified isocyanate K as basic materials .

  7. TiN聚氨酯复合材料抗冲蚀磨损性能是聚氨酯的2.81倍。

    Erosion wear resistance of polyurethane TiN ceramic composite is 2.81 times that of polyurethane .

  8. 硬质聚氨酯泡沫塑料(PU)在建筑节能中的应用

    The application of rigid polyurethane foams in the energy saving of construction

  9. RIM聚氨酯加工设备及其在汽车内饰件生产中的应用

    RIM Polyurethane Equipment and Application in the Automotive Interior Trim

  10. RIM聚氨酯弹性体预聚物的反应动力学研究

    Reaction Kinetics of RIM Pu Prepolymer

  11. 采用减压共沸蒸馏工艺制备的聚氨酯材料在低温区的tanδ峰消失。

    The tan δ peak of PU material at low temperature disappeared through decompress co-boiling distilling technology .

  12. 其次通过分析聚氨酯(PU)的透声和降噪机理,讨论了PU的声学性能;

    Then the acoustic properties were discussed by analyzing the mechanism of minimizing flow noise while maximizing transmission of signal .

  13. IPN改性的丙烯酸芳香族聚氨酯涂料的研究

    Study on the Modified IPN Acrylic Aromatic Urethane Paint

  14. TiO2-SiO2溶胶的制备和在水溶性聚氨酯中的分散行为

    Preparation and characterization of TiO_2-SiO_2 sols dispersed in water soluble polyurethane

  15. 探讨了肼基、酰胺基的含量对水性聚氨酯(PU)乳液、苯丙(PA)乳液性能的影响以及交联反应对漆膜性能的影响。

    The effect of the content of the keto group and the hydrazine group and the crosslinking reaction on the emulsions was discussed .

  16. HTPB/液化改性MDI型聚氨酯弹性体的合成、结构与性能的研究

    Study on Synthesis , Structure and Properties of Polybutadiene / Liquefication Modified MDI-Based Polyurethane Elastomer

  17. 无游离异氰酸酯聚氨酯胶粘剂的研制分光光度法测聚氨酯胶粘剂中NCO含量的研究

    Study on Isocyanate Monomer Free Polyurethane Adhesive

  18. 短Kevlar纤维增强的热塑性聚氨酯弹性体

    Thermoplastic polyurethane elastomers reinforcing with short Kevlar fibre

  19. 采用聚醚、TDI、丙烯酸羟基酯等合成出具有优良柔韧性的聚氨酯UV树脂,并经工业化扩大,生产出性能优异的UV树脂。

    The polyurethane UV resin with excellent flexibility is prepared by polyether , TDI , hydroxyl acrylate and et al . It is already industrialized .

  20. IPN改性聚氨酯/丙烯酸酯涂料

    IPN Modified Polyurethane / Acrylic Coating

  21. 研究了热塑性聚氨酯(TPU)与丙烯腈-丁二烯-苯乙烯共聚物(ABS)共混对ABS结构和性能的影响。

    This paper studied the influence of blending ABS with thermoplastic polyurethane ( TPU ) on the structure and properties of ABS resins .

  22. 所制备的高固含量水性聚氨酯表现出优越的粘接性能,未加固化剂的单组分水性聚氨酯剥离强度(PVC/PVC)高达8.8N/mm。

    Without external cure agents , the unique one-component waterborne polyurethane displays excellent adhesive properties , T-peel strength test ( PVC / PVC ) yielded a maximum value of 8.8N/mm .

  23. 分光光度法测试表明TiO2质量分数为20%的复合微粒在聚氨酯水乳液中具有良好的分散性能,而加入质量分数为1%的十二烷基磺酸钠后,对SiO2/TiO2纳米粉末的分散性能改善最大;

    Spectrophotometer shows the composite materials containing 20 % have good dispersibility in the PU aqueous emulsion which can be optimized through adding 1 % SDS .

  24. IPN聚氨酯乳胶漆

    IPN Polyurethane latex paint

  25. 采用原位乳液聚合法,合成聚氨酯-丙烯酸酯(PUA)复合乳液。

    The title acrylate-polyurethane ( PUA ) hybrid emulsion has been prepared by in-situ polymerization process .

  26. 我们推测bFGF通过上调内皮细胞β1整合素表达,增强了内皮细胞在聚氨酯材料上的黏附。

    It is concluded that the bFGF may induce the overexpression of endothelial cell integrin β 1 subunits to increase the cell adhesion onto polyurethane material .

  27. 结合我单位实际设计情况,为了在模具设计过程中避免重复劳动,提高CAD运用效率和设计质量,缩短产品开发周期等,提出建立聚氨酯塑料三维模具系统这一课题。

    Associate with the department practically design condition , the subject of urethane plastics 3D mould system is brought forward for avoiding repeat labor , raising CAD using efficiency and quantity , shortening product development cycle .

  28. 研究了废聚氨酯(PU)的溶解特性,以及用其制造的粘合剂和防水透气薄膜的性能。

    The dissolution character of waste PU was reported . The performance of binder and water-repellent and ventilate film which were synthesized by waste PU was also investigated .

  29. 以聚醚多元醇、扩链剂、异氰酸酯、增塑剂、填料等为原材料,制备了MDI型双组分聚氨酯塑胶跑道用浆料。

    Two-component polyurethane synthetic-rubber track resin slurry was prepared by polyether , chain extender , MDI-based polyisocyanate , plasticizer , filler .

  30. SBS接枝MMA、AA聚合物和活性单体及交联剂与聚氨酯胶的组合,广泛用于各种表面,可产生最好的粘附力。

    A combination of a graft polymer formed CR-SBS / MMA-AA , reactivmonomer and crosslinking agent with polyurethane gave best adhesion between a wide variety of surfaces .