联轴器螺栓

  • 网络coupling bolt
联轴器螺栓联轴器螺栓
  1. 做一个联轴器螺栓需要多长时间?

    How long will it take to make a coupling bolt ?

  2. 汽轮机联轴器螺栓疲劳特性及寿命预测模型的研究

    An experimental study on fatigue behavior and life prediction model of coupling bolt for the steam turbine

  3. 汽轮机联轴器螺栓低周疲劳特性实验研究

    An Experimental Study on Low-Cycle-Fatigue Behavior of Coupling Bolt for the Steam Turbine

  4. 与传统联轴器螺栓相比,液压螺栓能有效地防止卡涩和咬死。

    Compared with conventional coupling bolts , the hydraulic radial-fit bolts can effectively prevent unsmooth stagnation .

  5. 汽轮机联轴器螺栓剪切疲劳试验研究粘性剪切型阻尼器性能试验研究

    EXPERIMENTAL STUDY ON TORSIONAL FATIGUE BEHAVIOR OF COUPLING BOLT FOR THE STEAM TURBINE Performance experiment for viscous shear damper

  6. 为此,介绍了液压联轴器螺栓组件的结构、特点和工作原理,以达到对液压联轴器螺栓一般认识了解的目的。

    The structure , features and working principle of the proposed bolt are described to give basic knowledge of it .

  7. 查明了汽轮机联轴器螺栓断裂是导致振动的主要原因,更换螺栓后振动得以消除。

    After confirming that the vibration was caused by the bolts breaking of steam turbine 's coupling mainly , the bolts were replaced so that the vibration was eliminated .

  8. 针对传统汽轮发电机组联轴器螺栓拆卸时往往出现卡涩的问题,大亚湾核电厂引进了一种新型的联轴器液压螺栓。

    In view of the clamping stagnation during the disassembly of conventional coupling bolts on steam turbo units , a new type of hydraulic bolt is introduced in Daya Bay Nuclear Power Station .

  9. 针对KJ型提升机主轴齿轮联轴器联接螺栓断裂问题,应用强度理论对螺栓的破坏进行静态和动态分析。

    The troubles for rupture of join bolts on gear coupling of KJ hoist main shaft are analyzed on the base of strength theory and the solution is put forward .

  10. 汽轮发电机轴系联轴器液压螺栓介绍

    Introduction to hydraulic bolts on shaft coupling of steam turbo-units

  11. 十字轴万向联轴器联接螺栓疲劳强度分析与计算

    Analysis and Calculation of Connecting Bolt Fatigue Strength in Cross Shaft Universal Joint

  12. 联轴器液压螺栓的应用

    Application of hydraulic radial-fit bolts onto couplings

  13. 二辊轧机联轴器连接螺栓断裂事故分析

    Analysis of the breakage of the connecting bolt used in the coupling in 2 high mill

  14. 本文采用现代设计方法对齿轮联轴器的螺栓连接进行了强度的可靠性分析,同时对其作了实地使用的调查,结果表明:螺栓连接的强度裕度比需要的大得多。

    In this paper , modern design method is adopted to analyze the reliability of bolt connection in gear couplings . Some investigations have been conducted on its practical use . The results of the investigations show that the strength margin of bolt connection is by far higher than needed .

  15. 汽轮发电机组联轴器液压拉伸螺栓的开发应用

    Development and application of hydraulic tensile bolts for shaft couplings of turbo-generator sets

  16. 汽轮机联轴器的新型螺栓技术&径向紧固螺栓的特点及其使用业绩

    Steam Turbine New Coupling Bolts Technology : Features and Experience for Radial Fit Coupling Bolts

  17. 介绍了我厂近年开发、制造成功的带中间锥套的联轴器液压紧配螺栓,并从设计计算和制造工艺等方面对其进行了论述和剖析。

    In this paper , it is introduces that the shaft coupling bolt to be close fitted by hydraulically expanding an intermediate sleeve during fitness and invented recently by our shipyard , and its design calculation and manufacture process are discussed .