耐冲击性

  • 网络impact resistance;shock resistance;Dent resistance;Kg.cm
耐冲击性耐冲击性
  1. 试验发现,本工艺中的侧沟具有很强的固液分离效果,且耐冲击性较好。

    It was found through the test that the side channel in this technology had strong solid liquid separating effect , together with good shock resistance .

  2. 出色的平衡性能的终端撤军和耐冲击性。

    Excellent balance of properties between terminal pullout and impact resistance .

  3. 基于ANSYS的耐冲击性客车车体模态分析

    Modal Analysis for the Crashworthy Passenger Train Based on ANSYS

  4. 加入聚丙烯酸酯改性剂可以有效的提高PVC材料缺口冲击强度,并且表现出很好的低温耐冲击性。

    By adding polyacrylate modifier , the notched impact strength of PVC increased . And show better impact strength than CPE at low temperature .

  5. 具有较好的柔韧性、耐冲击性、透明性、粘结性等,但机械强度不高、热稳定性差、不耐磨,限制了EVA的进一步应用。

    It has good flexibility , impact resistance , transparency , adhesion , etc. , but its low mechanical strength , poor thermal stability and resistance , limit its application .

  6. 采用表面处理的纳米TiO2微粒分级混合于聚酯环氧粉末涂料中,研究了纳米TiO2对涂膜耐冲击性、抗弯性能的影响,以及所产生的优秀抗菌性能。

    The surface pretreated nano TiO 2 particle is mixed in the polyester / epoxy hybrid powder coatings system . The influence of nano TiO 2 on impact and flexibility of coatings film and its excellent antibacterial effect is investigated .

  7. 介绍了基于ANSYS软件的模态分析方法,并对耐冲击性客车进行了详细地模态分析,确定了相对合理的结构,为高速铁路客车的合理设计提供参考依据

    This paper introduces the modal analysis method based on ANSYS software , and analyzes in detail the modal of the crashworthy passenger train , In the end , the relatively reasonable structure is obtained . It has reference value for the design of high-speed passenger trains in China

  8. 添加纳米AY-2粉体可在一定程度上提高涂膜的光泽、耐冲击性和T弯;添加纳米AY-2粉体的漆膜耐盐雾性能得到提高,电化学性能测试结果也与耐盐雾性测试结果一致。

    Incorporation of nano AY-2 can improve the gloss , hardness , impact ability and T-bend of the coatings , as well as its salt spray result .

  9. 刀尖圆弧半径对金刚石薄膜涂层刀具耐冲击性的影响

    Influence of Corner Radius on Impact Resistance of Diamond Film Coated Tools

  10. 普通型环氧树脂的粘度高、耐冲击性及耐候性差。

    But general-purpose resin with high viscosity , impact resistance and poor weatherability .

  11. 它改善了耐冲击性和良好的加工特性。

    It has improved surface aesthetics , excellent dimensional stability and low warpage characteristics .

  12. 耐磨性,耐冲击性良好。

    Good impact and abrasion resistance .

  13. 初步结果表明,树脂膜的耐冲击性、硬度、透明性等性能均有一定提高。

    Preliminarily it is shown that the impact resistance , hardness and transparency of the resin are improved .

  14. 涂膜可室温固化,硬度适中,耐冲击性好。

    The coating can be solidified in room temperature , and has proper hardness and good impacting resistance .

  15. 但环氧树脂固化物存在着脆性较大、耐冲击性差的缺点,限制了其在更高要求方面的应用。

    However , the application of epoxy cured in the higher-requested fields is limited as its brittleness and poor thermal properties .

  16. 悬挂系统:采用独具特色的新式悬挂系统,强度高、耐冲击性强;

    Suspension system : it uses typical and new type suspension with the features of high strength and good impacting resistance ;

  17. 介绍了漆膜耐冲击性的检测方法标准及其实施中应注意的问题。

    The test method standard of film impact resistance and the problem had to be paid attention to when implementing were introduced .

  18. 氮气保护可以提高釉层的抗热震性、耐冲击性及金属与瓷层界面的致密性;

    The resistance of the coating to thermal shock , and impact and its densification can be improved by using nitrogen as protector .

  19. 此时复杂黄铜具有简单黄铜所不具备的高强度、高耐磨性及高耐冲击性,其强化方式为固溶强化和颗粒强化。

    It has strength , wearability and impact resistance much higher than simple brass does due to Its solution strengthening and particle strengthening .

  20. 另外,环氧树脂固化后存在性脆,耐冲击性、耐候性差等缺陷而阻碍其应用,有必要对环氧树脂进行适当改性以适应不同需要。

    In addition , the application of epoxy resin has been hindered by their fragile performance , poor impact resistance and weather fastness after curing .

  21. 它具有测力范围较大、不受电磁干扰、耐冲击性好、灵敏度高、易加工等特点,应用前景看好,因此开展该项技术的研究不仅具有重要的科学意义而且具有重要的实用价值。

    This new technology has many advantages such as large-scale force measurement , not affected by electromagnetism , shock proof , high sensitivity and easy to fabricate .

  22. 性能测试表明:涂膜的硬度、耐冲击性、光泽等性能优于溶剂型的氨基醇酸树脂涂料。

    The performance tests show that the property of the film , such as hardness , impact resistance and gloss , are better than those of the solvent-base alkyd melamine coating .

  23. 运用有限单元法来分析轮毂结构可以很好地平衡这些设计要求,而铝合金轮毂的耐冲击性是设计中主要的强度指标。

    Finite Element Method is used to analyze the wheel structure , which can effectively balance those design requirements , while anti-impact property is the main strength indicator of the design .

  24. 水性聚氨酯具有优良的柔韧性、耐冲击性、耐磨性和耐低温性能等特点,其作为鞋用胶黏剂的应用更是成为近年来研究的热点。

    The application of waterborne polyurethane as shoe adhesives has become a hotspot of recent research due to the excellent flexibility , impact resistance , abrasive resistance and low temperature resistance .

  25. 采用了附着力测定仪、冲击试验器、冲蚀磨损试验机等手段,对纳米复合涂层、普通涂层的附着力、耐冲击性和抗冲蚀磨损性能进行了研究。

    The properties of nanocomposite coatings and common coatings have been studied by means of adhesion , impulsion and flowing wear test machine , which include adhesion , impulsion-resistance and abrasion resistance .

  26. 结果表明:硬度预测值与实验值相对误差的绝对值的平均值为5.90%,附着力预测准确率为100%,耐冲击性预测准确率为100%。

    The results show that the average absolute value of relative errors between predictive and measured values of hardness is 5.90 % , the prediction accuracies of adhesion and impact resistance are 100 % .

  27. 该涂料体系的防腐涂层可常温固化,厚度达到275μm,防腐蚀寿命可达20年之久,其防腐效果、耐冲击性和耐候性良好。

    This coating system can be cured at ambient temperature , film thickness can reach 275 μ m , anti-corrosion lifetime is almost 20 a. Its anti-corrosion performance , impact-resistance and weatherability are good .

  28. 液晶环氧树脂与普通环氧树脂相比,其耐热性、耐水性和耐冲击性都大为改善,可以用来制备高性能复合材料;

    Compared with other ordinary epoxy resin , the liquid crystalline epoxy resin 's capabilities of heat-resistant 、 water-resistant and impact-resistant are improved and the liquid crystalline epoxy resin are also prepared to high-powered composite material ;

  29. 反应器的容积负荷可达5kgCOD·m-3d-1以上;上流式厌氧过滤器启动期短,耐冲击性好。

    The volumetric loading rate of the reactor exceed 5 kgCOD · m - 3 d - 1 . The up-flow anaerobic filter had the advantages of short time to start-up and high tolerance for loading shock .

  30. 通过断续车削试验研究了刀尖圆弧半径对金刚石薄膜涂层刀具耐冲击性的影响,指出适当增大刀尖圆弧半径可有效提高金刚石薄膜涂层刀具的耐冲击性。

    The influence of the corner radius on the impact resistance of diamond film coated tools is studied through the interrupted turning test . It is proposed that properly increasing the corner radius can effectively improve the impact resistance of diamond film coated tools .