耐久性试验

  • 网络Durability test;Endurance Test
耐久性试验耐久性试验
  1. 基于PLC的汽车起动机耐久性试验系统

    Durability Test System of the Automobile Starter Motor Base on PLC

  2. 实现了ISA总线与试验台中自定义总线的接口转换功能,目的是改造原有试验台使其满足新型号汽车空调压缩机耐久性试验的要求。

    It implements interface transfer between ISA bus and self-defining bus . The aim is to reform the initial test-bed to satisfy the durability test requirements of the newfashioned automobile air-conditioning compressor .

  3. FRP加固混凝土结构耐久性试验研究

    Experimental Investigation on Durability of FRP Strengthened Concrete Structure

  4. NATOAEP&5耐久性试验标准浅析

    Analysis on Standard of NATO AEP ── 5 Endurance Test

  5. 应力腐蚀下FRP全包混凝土柱的耐久性试验研究

    Experimental Research on Durability Performance of FRP Entire Packaged Concrete Columns under Stress Corrosion Environment

  6. 介绍一种具有3个检测工位的汽车点火开关耐久性试验台及其计算机数控(CNC)系统。

    This paper introduces a kind of auto ignition switch durable tester with 3 test gear and its CNC systen .

  7. 干湿交替环境中CFRP加固预裂RC梁耐久性试验

    Endurance experiment of the precracked RC beams reinforced by CFRP in dry and wet alternative environment

  8. FRP筋酸碱盐介质腐蚀与冻融耐久性试验研究

    Durability Experimental Research on Resistance of Acidic , Alkali , Salt Solutions and Freeze-thaw Properties of FRP Bar

  9. 干湿环境下FRP全裹与条带间隔加固混凝土圆柱耐久性试验研究

    Experimental study on durability of FRP entirely-wrapped concrete cylinders and FRP strip-wrapped concrete cylinders under wet-dry cycles in salt solution

  10. 在FRP材料、浸渍树脂及CFRP-混凝土粘结性能的系列耐久性试验的基础上,从理论上提出了一种评价其耐久性的方法。

    On the basis of the experiments of durability of FRP , saturating resin and adhesive behavior of CFRP and concrete , a theoretical evaluation method was proposed .

  11. 结果表明,DSP胎体轮胎与改性锦纶66胎体轮胎相比,轮胎静态断面宽小;耐久性试验后,DSP胎体轮胎断面宽变化率小于改性锦纶66胎体轮胎;

    The results showed that compared to modified nylon 66 cord tire , DSP cord tire featured smaller static cross-sectional width , lower change rate of cross-sectional width after endurance test , higher change rate of cross-sectional width after high speed test ;

  12. 尽管现阶段针对FRP筋的耐久性试验考虑了侵蚀环境的影响,但侵蚀性海洋环境下FRP筋与混凝土粘结性能尚未见报道。

    Although the durability test for FRP rebars at present has taken the influence of erosion environment into consideration , the bonding performance of FRP rebars and concrete in erosion marine environment has not been reported .

  13. RPC-NC组合截面梁的耐久性试验研究

    Experimental Study on the Durability of RPC-NC Combined Section Beams

  14. 该试验台可以覆盖全系列的汽车点火开关的耐久性试验,该试验台的CNC系统具有很高的柔性;系统软件采用GUI技术,人机界面新颖、友好、操作方便

    The tester covers the durable test of oll series auto ignition switch The CNC system of the tester has high flexibility , its software adopts GUI technology , and the man computer interface is novel and friendly and the operation is convenient

  15. 100P转向节衬套及平面轴承耐久性试验装置开发

    Developing of Endurance Test Apperatus of 100P Steering Knuckle Bush and Plain Bearing

  16. 本试验台采用工业控制计算机作为耐久性试验台控制核心,文中通过介绍Windows98操作系统内核的管理机制与虚拟环境的实现,对Windows98环境下的虚拟设备驱动程序VxD进行了深入的研究。

    This test-bed adopts industrial control computer as the control core of durability test-bed . The paper researches deeply the VxD under windows 98 environment via introducing the implementation of the administer mechanism and virtual environment of windows 98 core .

  17. 在高压交流断路器合成试验的瞬态恢复电压(TRV)调节回路中,其调频电容的工作条件有特殊的要求,必须按其实际运行工作负荷进行特殊的耐久性试验。

    In transient recovery voltage ( TRV ) adjusting circuit of synthetic test of high-voltage alternating-current circuit-breakers , the frequency-modulation capacitors work in special conditions and the endurance test must be performed under actual load .

  18. 对采用陶瓷-金属梯度功能材料的发动机进行的400h耐久性试验表明,气缸体及活塞的主要接触面磨损量为5~6μm,发动机功率下降仅为5%。

    The 400-hour durability tests of the engines with the ceramics-metal gradient functional material show that wear of the main surfaces of cylinder body and piston is 5 ?

  19. 在汽车车轴的室内耐久性试验方法中,等幅试验是最快速、最简单的方法,而应用远程参数控制(RPC)或迭代传递函数补偿(ITFC)技术的随机加载试验是最复杂的方法。

    Of the indoor endurance test methods of vehicle axles , the constant amplitude test is the fastest and easiest test and the random load test with remote parameter control ( RPC ) or iterative transfer function compensation ( ITFC ) technique is the most complicated one .

  20. 以哈尔滨工业大学开发的有限元专用软件并结合室内耐久性试验,研究轮胎整体结构优化设计理论(TECO)和平衡轮廓设计理论所设计的轮胎。

    The tires designed with the Tire Entire Configuration Optimum ( TECO ) theory presented by Shanghai Double-coin Truck Tire Company and the classical Balance Profile theory respectively were investigated using the proprietary FEA software developed by Harbin University of Technology combined with the indoor endurance test .

  21. 汽车交流发电机高速冲击耐久性试验系统的结构设计

    Structure Design of High-speed Shock Durability Test System on Auto Alternator

  22. 高压脉冲电容器耐久性试验线路的设计及实施

    Design and Implementation of Endurance Test Circuit of High-voltage Pulse Capacitor

  23. 基于自动驾驶机器人的汽车排放耐久性试验台的研制

    Development of test rig for vehicle emission durability based on robot

  24. 起动机的耐久性试验汽车起动机衬套的使用

    Endurance Test of the Starting Motor Using of Vehicular Starter Bushing

  25. 桥面铺装用纤维混凝土耐久性试验与分析

    Durability Experiment and Analysis on Fiber Concrete Applied in Bridge Pavement

  26. 塑料钮扣耐久性试验法:冲击力

    Test method for durability of the plastic buttons to impact force

  27. 城市垃圾熔渣骨料混凝土耐久性试验研究

    Experimental research on durability of urban garbage molten slag aggregate concrete

  28. 几种环氧胶胶接接头耐久性试验

    A test for the Durability of Some Epoxy Adhesive Joints

  29. 汽车空调压缩机耐久性试验台总线接口转换板的开发

    Development of Bus Interface Conversion Card of Automobile Air-conditioning Compressor Durability Test-bed

  30. 比较了两种设计并与两种设计的台架耐久性试验进行对比。

    Two designs are analyzed and two bench durability experiments are compared .