磨浆

  • 网络refine;milling;Slurry;pulp grinding
磨浆磨浆
  1. APMP制浆工艺&漂白、磨浆、筛选流程的设计与改进

    APMP pulping process : the design and improvement of bleaching , refining and screening

  2. 制取了兰桉APMP浆,并就其磨浆过程对浆料质量的影响做了初步探讨。

    Making E.globulus APMP and research about the effect of refining process to the characteristics of the pulp have been carried out .

  3. 用西门子PLC控制锥形磨浆机一例

    An Example of Application of Siemens PLC on Controlling Conical Refiner

  4. 锥形磨浆机PLC控制改进实例

    An example of the improvement on PLC of the conical refiner

  5. Papillon~(TM)&磨浆新概念

    Papillon ~ ( TM ) & A New Refining Concept

  6. 基于可视化虚拟设计技术的双螺杆磨浆机芯轴CAE分析

    CAE Analysis to the Shaft of Twin-Screw Pulping Machine Based on Visualized Virtual Design

  7. TMP低浓磨浆

    Low Consistency Refining of TMP

  8. 荻CMP高浓磨浆时纤维微细结构的变化和浆张性能

    Changes in Microfibril Structure and Properties of Pulp Sheet of Amur Silver Grass CMP during High Consistency Refining

  9. 辊式磨浆机用于落叶松SCMP的应用试验

    Application of the Twin Screw Roller Refiner to the Refining of Larch SCMP

  10. 根据磨浆机工作特点,设计了基于S7-200的新型磨浆机控制系统。

    According to the working characteristics of refiner , a new refiner control system based on S7-200 was designed .

  11. 采用可视化虚拟设计方法,利用工程分析软件ANSYS对双螺杆磨浆机中的主要元件芯轴进行了应力分析,并提出优化设计方案。

    Based on visualized virtual design , stress analysis was done to the Shaft of Twin-Screw Pulping Machine with engineering analysis software ANSYS as platform . Optimum design results are obtained .

  12. 漂白麦草浆与白杨P-RCAPMP共磨浆特性的研究

    Study on the Co-refining Properties of Bleached Wheat Straw Pulp and Aspen P-RC APMP

  13. 介绍了西门子PL(CS7-200)在制浆车间锥形磨浆机控制中的应用,主要包括锥形磨浆机控制的硬件组成、控制系统及打浆度软测量技术。

    The application of Siemens PLC on controlling conical refiner is introduced with the focus on the hardware composition , control system and the soft-measuring technique of beating degree .

  14. 在高得率浆生产过程中,磨浆消耗大量的能源,主要原因是常规打浆很难打破纤维细胞壁的P层和S1层。

    The refining stage consumes a great deal of energy in HYP producing process , and the main reason are that the P and S1 layer of cell wall are difficulty to break in conventional refining .

  15. 通过TMP盘磨机磨浆的大量试验数据,提出并建立了控制磨浆质量的数学模型,即控制磨浆浓度的数学模型和控制盘磨间隙的数学模型。

    The in paper discnssed to mathematical model of quality control for TMP pulp , establishing an set mathematical model for consistency control and interstice control of disc refiner .

  16. 三倍体毛白杨P-RCAPMP二段低浓磨浆初探

    Study on the Low Consistency Refining at the Second Stage of P - RC APMP with the Triploid of Populus Tomentosa

  17. sorokiniana弱。动态挤压磨浆早一中侏罗世为弱挤压背景下的山间盆地;

    An inter-mountain basin under the background of weak extrusion in the Early and Middle Jurassic ;

  18. Na2S03用量是影响成浆白度和强度的主要因素,经Na2SO3处理可以显著降低磨浆能耗。

    The dosage of sodium sulfite is the main factor to effect the brightness and physical strength of pulp , and the refining energy consumption can be significantly decreased after sodium sulfite treatment .

  19. 麦草H-ACMP与ACMP相比较,磨浆后可以提高浆料的抗张指数和撕裂指数分别约7%和5%。

    Compared to the ACMP , H-ACMP respectively increases 7 % and 5 % in tensile index and tear index of chemi-mechanical pulp .

  20. 本文介绍了引进的BCTMP生产线的工艺流程,并结合实践对马尾松新闻纸浆的磨浆、漂白工艺进行了理论总结和探讨。

    This paper introduces the technical process of the introduced BCTMP production line and provides a theoretical summarization and exploration of the refining and bleaching processes in the newsprint making from masson pine .

  21. 通过记录磨浆能耗以及对成浆扫描电镜观察分析,对粉单竹PRC-APMP的磨浆性能进行了研究。

    Refining performance of white powdery bamboo PRC-APMP is studied in the paper by recording refining energy and a scanning electron microscope analysis of stock .

  22. 在生物制浆方面主要有两个发展方向,一是利用白腐菌脱去部分木素再用机械法制浆,所得浆料与CTMP浆相比,纸浆性质相仿,而磨浆电耗可明显降低;

    At present , it includes two methods : one uses white-rot fungi to degrade lignin partly and then to adopt mechanical pulping , as a result , the quality of the pulp obtained is similar to CTMP , but the refining energy is reduced obviously ;

  23. 最佳工艺条件为原料磨浆加水量15%、熬制时间4min。

    The optimal condition of processing technique is that the dosage of water while grinding kelp and auricularia-auricula to paste is 15 % , the time of paste decocting is 4 minutes .

  24. 在磨浆转数为20000r时,纤维长度和纤维粗度减小明显,细纤维化程度显著,此时的无石棉胶乳抄取板的抗张指数达到最大值。

    The plant fibers were defibered effectively , the average length and the fiber-coarseness of plant fibers dropped evidently . Moreover , the tensile index of the non-asbestos sheet reached the maximum at 20000r .

  25. 双螺旋辊式磨浆机筒体离心铸造工艺及性能研究

    Study of Centrifugal Casting Technology of Double Spiral Roller Grinded-paste Machine

  26. 磨浆过程中添加碱性过氧化氢技术研究

    Refiner Bleaching of Poplar High Yield Pulps with Alkaline Hydrogen Peroxide

  27. 中浓磨浆机在箱纸板生产中的应用

    The application of middle-density refiner to the production of carton board

  28. 新型圆柱磨浆机的结构及其性能试验分析

    A structure and performance experimental analysis of a new cylindrical refiner

  29. 磷矿磨浆时球磨机研磨体的选择

    Selection of Grinding Parts of Ball Mill for Phosphate Rocks Slurry

  30. 造纸高浓度锥形磨浆机的研究与设计高浓度制浆造纸废水的深度治理技术

    Advanced Treatment Technology for High-Concentration Wastewater from Pulp and Paper Mills