硬铝合金

  • 网络Hard aluminum alloy;Duralumin alloy;Al-Cu-Mg
硬铝合金硬铝合金
  1. 对LY12硬铝合金进行了热处理工艺试验,获得了该合金热处理工艺与力学性能之间的关系。

    LY12 duralumin was heat treated on a trial basis and the variation of microstructure and mechanical properties with heat treatment process was obtained .

  2. 车铣加工硬铝合金微细轴技术

    Turn-milling machining technology for miniature spindles of duralumin alloy

  3. ECAP变形后超硬铝合金的电化学腐蚀行为

    Electrochemical Corrosion Behavior of Super-hard Aluminum Alloy Deformed by ECAP

  4. 硬铝合金化学复合镀(Ni-P)-聚四氟乙烯性能的研究离子束混合对铝合金腐蚀行为影响的阳极极化研究

    Study of Performance of Electroless Composite Plated ( Ni-P ) - PTFE on Hard Aluminium Alloy Anodic polarization of hard aluminium : the influence of ion beam twice mixing on corrosion behaviour

  5. 采用三相次级整流点焊机和动态参数检测系统,研究了硬铝合金LY12直流点焊焊接性;

    The weldability of alumimum & alloy 508 for DC spot welding is studied by use of DC spot welder and dynamic parameter testing system .

  6. 针对LY12硬铝合金,研究了搅拌摩擦焊焊接中搅拌针与被焊金属间力的作用对整个焊接过程的影响。

    The effect of the acting force of stirring pin upon the welded material on the whole welding process was investigated by studied using LY12 aluminium alloy .

  7. 本文利用Gleeble-1500热/力模拟试验机,采用高温等温压缩试验方法,对7055新型超硬铝合金的高温塑性变形流变应力行为及组织演变行为进行了研究。

    The deformation behaviors and evolution behaviors of the microstructure for the new 7055 aluminum alloy at high temperatures have been investigated by isothermal compression testing method with Gleeble-1500 thermal simulator .

  8. 结果表明,线性摩擦焊可成功焊接LC9超硬铝合金,焊缝的拉伸强度与母材基本相同。

    The results show that the LC9 alloy can be welded by the linear friction welding successfully , and the tensile strength of the welded joint is close to the base metal .

  9. 硬铝合金薄壁杯形件成形工艺与模具

    Forming Process and Die of Hard Aluminium-Alloy Thin-wall Cap-shape Parts

  10. 硬铝合金表面微弧氧化着色工艺研究

    Study on Micro-arc Oxidation Coloring of Hard Aluminium Alloy Surface

  11. 超硬铝合金强度&硬度关系的分析

    Relationship between Strength and Hardness in High Strength Al Alloys

  12. 硬铝合金金相显微组织分析

    The Metallogrophic Microstructure Analysis of the Hard Aluminum Alloy

  13. 硬铝合金剥蚀速率测试方法的研究

    The measurement of the exfoliation rate of aluminium alloys

  14. 随机循环载荷下某硬铝合金的疲劳可靠性分析

    The Fatigue Reliability Analysis of a Hard Aluminum Alloy under Random Cyclic Load

  15. 超硬铝合金试件中斜裂纹脉冲放电止裂

    Oblique crack arrest of super hardness aluminium alloy specimens by pulse current discharge

  16. 硬铝合金焊接性能的研究

    Study on welding properties of hard aluminum alloy

  17. 等径转角挤压的超硬铝合金的电化学腐蚀

    Study on Electrochemical Corrosion of Super-hard Aluminum Alloy Deformed by Equal Channel Angle Pressing

  18. 硬铝合金的侵蚀方法及技巧

    Etching methods and techniques of duralumin alloy

  19. LY&12硬铝合金表面裂纹产生和发展

    Research on Generation and Development of the Surface Flaws of the LY-12 Hard Aluminium Alloy

  20. 小磁镜装置处理镜端损失粒子和杂质气体的硬铝合金真空系统

    Aludur Vacuum System of Small Mirror Machine , which Treats Mirror Loss Particle and Gas Impurity

  21. 超硬铝合金整体精车加工成型壳体外压稳定性研究

    The Stability of shells made of superhard aluminum alloy and formed integrally by precise turning under the external pressure

  22. 高频低压氮等离子体浸没离子注入超硬铝合金表面改性研究

    The Properties of Superhard Aluminium Alloy Implanted with Nitrogen by High Frequency and Low Voltage Plasma Immersion Ion Implantation

  23. 通过对超硬铝合金7175T74的试验研究,给出了7175T74合金的锻造工艺参数。依此工艺生产的锻件其性能达到美国宇航材料规范AMS4149A规定的技术指标。

    By experimental research on the superhard aluminum alloy7175T74 , the parameters of forging process of7175T74 are given , which achieve the mechanical property of the of U.S.'AMS4149A .

  24. 采用电刷镀设备对飞机硬铝合金蒙皮表面局部的腐蚀进行阳极化,然后实施喷漆,从而达到了原位快速修复的目的。

    The local corrosion area on the hard aluminum alloy of aircraft skin surface was rapidly renovated in-situ by anodising with brush electroplating equipment firstly and then spray painting .

  25. 采用浸镀金属锌对预处理后的硬铝LY11合金加以表面改性;

    The surface of pretreated aluminium alloy ( LY11 ) was modified by zinc immerseplating .