硬件配置

yìnɡ jiàn pèi zhì
  • hardware configuration
硬件配置硬件配置
  1. 本文总结了大型Linux集群的硬件配置说明。

    That concludes the instructions for hardware configuration for a large Linux cluster .

  2. 在相同的硬件配置下,在这种模型下运行的Web服务器比每个连接一个线程模型具有更好的扩展性。

    With the same hardware configuration , web servers running in this mode scale much better than in the thread-per-connection mode .

  3. 整个系统用VC++6.0和OPENGL,辅助以必要的硬件配置,成功地开发完成。

    The system is developed by VC + + 6.0 and OpenGL .

  4. 当然了,实际的限制取决于硬件配置,比如内存、CPU等等。

    The actual limit of course depends on the hardware configuration , such as memory and CPU .

  5. 论述了实验室烟丝处理控制系统的硬件配置和软件设计,以及恒温PID闭环控制回路的实现。

    The hardware configuration and software design of the control system and the realization of closed loop PID temperature control circuit were explained .

  6. 介绍一种基于Internet和现场总线的远程实时检测与控制系统方案,详细阐述了系统的整体结构、软硬件配置、系统关键技术等。

    Introduce one project of long-distance measuring and control technology based on Internet and field bus . The system 's overall structure , software and hardware configuration and key technology etc.

  7. 阐述了TPS系统的基本结构、该系统硬件配置、冗余技术的应用。

    The basic structure of TPS system , the system hardware arrangement and the redundancy technique application was described .

  8. 本文全面介绍了一个散装水泥站的PLC控制系统,包括其硬件配置和软件结构与功能。

    This paper introduces a PLC control system used for a seaport bulk cement terminal , including its hardware configuration , software structure and function .

  9. 修改新VM的硬件配置并装入作为CD的ISO文件

    Modifying the hardware configurations of the new VM and mounting the ISO file as a CD , and at last

  10. 分析了由位置控制器、直流传动装置和PLC组成的半浮芯棒连轧机组限动链控制系统的硬件配置及软件组成。

    Hardware and software configuration of drive system with position controller , DC drive unit and PLC for a retainer of semi-floating mandrel mill are analysed .

  11. 本文介绍了一种基于PLC的冷媒自动充填机的控制方案,并详细介绍了系统的工作原理、硬件配置、软件设计方法。

    This paper has introduced a kind of auto-controlling system about cool-medium filler and explained the system 's working principle , configure of hardware and software ;

  12. 讨论了本设计产生的背景,并给出系统的总体设计,详细解释了网关的协议转换方法,给出了通过Web服务器/浏览器方式实现信息交互的方法,对软硬件配置作了简单的介绍。

    The overall structure of the system is described , the methods for protocol conversion and information exchanging through the Web server / browser mode are detailed . The software and hardware configuration are demonstrated .

  13. 具体介绍了可编程序控制器性能指标,PLC硬件配置,软件设计,编程器,操作方式以及炉膛吹扫,火焰检测及火检原理等。

    The specification of programmable controller , PLC hardware configuration , software design , programmer , operation mode and furnace purging flame detection and it principle are presented concretely .

  14. 针对原全自动软水处理器运行中存在的问题,提出了基于PLC的控制系统改造方案,文中介绍了系统硬件配置和软件设计,给出了硬件系统结构框图。

    To solve the problems of the automatic softener , a PLC-based reconstruction project of is proposed . This paper explains the system 's hardware configuration and software design .

  15. 详细介绍了PLC在改造香烟小包机控制系统中的应用情况,并给出了系统的组成、硬件配置以及软件设计方法。

    The application of PLC in the reformation of cigarette packer 's control system is introduced detail . The system constitute and hardware disposal and software design method are also presented .

  16. 对系统的控制功能、硬件配置和软件设计进行了讨论,提供了PLC模块配置图,给出了程序设计流程。

    Furthermore , this paper gives detailed discussions on the control system , hardware configuration and software design , and provides the PLC modular diagram and the program design flow chart .

  17. 介绍可编程序逻辑控制器(PLC)在硫铁矿制酸装置渣仓贮卸系统的应用,以及相应的硬件配置和软件设计。

    The application of programmable logical controller ( PLC ) in the cinder storing and discharge system of a pyrite-based sulphuric acid plant , its hardware configuration and software design are described .

  18. 重点阐述了该系统基于Profibus-DP总线的软硬件配置及网络通信的设计。

    It emphatically describes the configuration of software and hardware and the design of network communication based on the Profibus-DP .

  19. 本文讨论了网络计算体系结构的演变、网络计算机(NC)的产生、NC的软硬件配置以及NC的特点等。

    This paper introduces the evolution of network computing architecture and the conception of network computers ( NC ) . Moreover , it presents the hardware and software configurations of network computers .

  20. 消费者需要什么硬件配置来运行Vista呢?他们是应该现在购买新PC,还是等到Vista发布后再购买呢?

    What sort of hardware will consumers need to run Vista and should consumers buy new PCs now , or wait until Vista is launched ?

  21. 介绍了在Windows环境下开发多线程串行通信程序以及智能流量监控系统中串行通信的系统构成,硬件配置和程序设计方法。

    This paper introduces how to design and develop multi thread serial communication program and the structure of intelligent flow measurement monitoring system under the Windows ' environment , including hardware configuration and programming method .

  22. 概述了风电机组电能质量测试的方法,并依据IEC标准提出了现场测试方案和硬件配置。

    The methodology of power quality measurement of wind turbine is described . The measurement scheme and instruments deployment based on IEC standards are given .

  23. 介绍了大型单轴燃气-蒸汽联合循环机组分散控制系统(DCS)的硬件配置和软件功能,阐述了联合循环机组的顺序启停和跳闸保护。

    The paper introduced the characteristics of DCS system for large single shaft gas-steam combined cycle units , which is designed to meet the demand of Mark ⅵ control system .

  24. 市场比较法评估信息系统以GIS技术作为手段,其技术系统包括软硬件配置、数据结构、输入输出系统、空间数据管理和用户界面等,初步设计并实现市场比较法评估GIS。

    With the help of Geographical Information System technology , the market date approach system includes computer setup , data structure , input / output system , spacial data management , user interface , and so on .

  25. 从硬件配置到软件设计两个方面进行了论述,介绍了OMRON的PLC产品在玻壳生产线上的应用。

    The paper expounds the use of OMRON 'S PLC products in the glass shell production line , and discusses problems from hardware allocation to software design .

  26. 在介绍了子午胎全自动裁断机控制系统的基本原理与组成的基础上,给出了PLC的硬件配置及人机交互系统的设计。

    Introduces the compose of the automatic radial ply tire cut control system in this paper , and poses a hardware configuration of PLC control system , and the design of human machine system ( HMS ) .

  27. 本文介绍PLC在矿井提升机安全控制中的应用,对PLC系统进行了软硬件配置,并设计PLC程序以实现部分保护功能以及提升机的双线制保护回路,包括继电器安全回路和PLC安全回路。

    This paper presents the application of PLC in safety control of mine hoist . Software configuration and hardware configuration of the PLC system are discussed , and the PLC program is given to achieve some protection functions .

  28. 主要针对准柔性生产系统及其控制系统组成原理进行了介绍,详细阐述了一种改进型PID控制算法以及使用PLC完成其控制的硬件配置和软件实现。

    A pseudo-flexible manufacturing system its control principle are presented and , and discusses the control rule of the PID control and the hardware configuration performed by PLC as well as the software realization of the control rule .

  29. 在硬件配置中,讨论了DSP的外设配置以及FPGA的逻辑设计,包括触发控制,曝光控制,行采集以及I/O端口设计等。

    In the hardware configuration , the peripherals of the DSP and the logic setting of the FPGA are discussed , including trigger control , exposure contral , line sampling , and the I / O ports setting .

  30. 基于FPGA的SoC与传统的基于ASIC的SoC相比具有开发周期短、风险小,可根据实际硬件配置改变硬件设计等优点,可以预见基于FPGA的SoC必将成为SoC设计的流行趋势之一。

    Compared to the traditional SoC based on ASIC , SoC based on FPGA has the advantages of short development cycle , low risk and reconfiguration of hardware design according to actual hardware resource .