石蜡乳液

GZ&A石蜡乳液的研制与其应用

Study on the preparation of GZ-A paraffin emulsion and its application

石蜡乳液的制备及其在表面施胶中的应用

Preparation of Paraffin Emulsion and Its Application in Surface Sizing

纸用石蜡乳液防水剂的制备及防水效果

Preparation and Application of Paraffin Emulsion Water-Proofing Agent on Paper

石蜡乳液制备工艺研究

Study on the manufacturing technology of paraffin emulsion

铅笔板专用石蜡乳液的配制及应用

Compounding and Application of Paraffin Emulsion for Pencil-slat

制备油酸铵石蜡乳液的最好方法是初生皂法；

The optimal method to manufacture Ammonium oleat paraffin emulsion is primary soap method .

该石蜡乳液泡沫少，稳定性较高，防水性能好。

This wax emulsion has excellent waterproof property with high stability and little foam .

刨花板用石蜡乳液的研制

Manufacture of Wax Emulsion for Partical Board

稳定的铝皂石蜡乳液

Emulsion of Alumina Soap Wax is Steady

切片石蜡乳液的制备专题论坛与召集人

Made for You Preparation of Paraffin Emulsion

新型石蜡乳液添加剂的研制

Preparation of New type Paraffin Emulsion Additive

稳定剂对高固含量石蜡乳液稳定性的影响

The effect of the stabilizing agent on the stability of high solid content wax emulsion

石蜡乳液的检验

Inspection of GZ-A paraffin emulsion

试验表明，此种石蜡乳液防水性能好，成本较低。

The experiment shows that the wax emulsion has the advantages of enhancing waterproof property and low cost .

切片石蜡乳液的制备

Preparation of Paraffin Emulsion

研究了多用途石蜡乳液添加剂的制备方法以及各种最佳工艺条件的选择。

The selectivity of the manufacture method and the best conditions of multifunction paraffin emulsion additive had been studied .

本文利用正交设计法对石蜡乳液制备工艺进行了广泛深入的研究。

This paper widely conducted researches on the manufacturing technology of the paraffin emulsion by using the orthogonal design method .

利用该项工艺与设备制备的石蜡乳液具有成本低、效率高、防水性能好及无氨水刺激性气味等优点。

And its advantages includes low cost , high efficiency , good water-proof property and no the irritant smell of ammonia water .

文内介绍了用于纤维板生产的防水剂&石蜡乳液质量的检验方法。主要包括石蜡乳液颗粒度分布的测定；

The paper recommends the method to inspect the quality of GZ-A paraffin emulsion which is used as a water proof agent for manufacturing fiber boards .

结果表明：乳化温度、乳化水用量和乳化方式是影响石蜡乳液质量的重要因素；

It shows that emulsifying temperature , amount of emulsifying water and emulsifying style are the important factors influencing on the quality of the paraffin emulsion .

通过对用胶体磨生产石蜡乳液防水剂的试验研究，开发出了一套新型石蜡乳液制备工艺与设备。

With the Experiment of the production paraffin emulsion waterproof and admixture with colloid mill , a new set of equipment and technology for paraffin emulsion are devel-oped .

石蜡乳液可填充石膏硬化体中的孔隙，改善石膏和改性秸秆纤维之间的界面黏结，从而显著提高复合材料的耐水性能。

Wax emulsion could fill pores within hardened gypsum to improve interfacial bond between gypsum and modified crop straw fibers , so that the waterproof property of the composite is improved .

提高乳化温度、适当增大搅拌速度、相应减少乳化水用量有利于提高石蜡乳液质量；

If we adopt raising emulsifying temperature , properly increasing the speeds of stirrer and decreasing the amount of emulsifying water , it will be good for improving the quality of the paraffin emulsion .

WinsorⅢ双连续型石蜡微乳液的制备

Preparation of Winsor ⅲ Middle Phase Paraffin Microemulsions

石蜡微乳液的研制

Study on Paraffin Wax Microemulsions

水包油型石蜡油纳米乳液的制备和性质研究

Formation and properties of paraffin oil-in-water nano-emulsions

采用专用高分子表面活性剂和转相法制备了系列石蜡-松香乳液，并考察了这些乳液中的表面活性剂种类和石蜡与松香的质量比对中密度纤维板防水性和力学性能的影响。

Series of wax-rosin emulsion were prepared using polymeric surfactants designed for the emulsion , and the effects of structure of the surfactant and the mass ratio of wax and rosin on the properties of the emulsion were investigated .

用种子乳液聚合法，以OP-10作为乳化剂，以K2S2O8作为引发剂，以丙烯酸（AA）为单体接枝改性石蜡（PF）乳液，合成了石蜡丙烯酸（PFAA）复合乳液。

With nonionic OP-10 as emulsifier , potassium persulfate ( K_2S_2O_8 ) as initiator , acrylic acid ( AA ) modified paraffine ( PF ) hybrid emulsion was synthesized by seed emulsion polymerization .

实验表明：乳化剂的选择及用量、乳化温度、乳化时间、搅拌速度、乳化水的用量及加入方式等均影响着石蜡的乳化及其乳液的稳定性。

The results show that the selection and dosages of the emulsifying agent , emulsifying temperature , emulsifying time , stirring speed , mount and addition method of the emulsifying water affect the stability of the paraffin emulsion .

以石蜡、硬脂酸、氨水等为原料，采用合适的乳化设备研制出刨花板用石蜡乳液防水剂。

Paraffin wax , stearic acid and ammonia are used as raw materials to manufacture paraffin emulsion waterproof agent for particleboard by adopting feasible emulsification equipment .