石墨制品

以某电炭厂石墨制品的废料为原样，对其进行了不同最高热处理温度（HTT（max））的热处理。

The processing graphite wastes from an electric-carbon materials factory were heat-treated with different maximum heat treatment temperature ( HTT_ ( max )) .

为了考察某电炭厂石墨制品废料用作锂离子电池（LIB）负极活性材料的可行性，将其原试样进一步进行了不同最高热处理温度（HTT（max））的热处理。

In order to examine the possibility of using the processing graphite wastes from an electric-carbon factory as the negative electrode materials in lithium ion batteries ( LIB ), the original samples were heat-treated with different maximum heat treatment temperatures ( HTTmax ) .

炭石墨制品抗冲击强度试验方法的研究

Study on resisted impact strength test procedures of carbon graphite products

应用于电池电极中的碳和石墨制品的导电性

Conductivity of carbon and graphite products used in the batteries ELECTRODS

炭石墨制品焙烧开裂的分析与研究

Analysis and Study on Crack of Carbon Graphitic Products during Baking

炭-石墨制品冷模压及模具设计

The cold-moulding process of carbon - graphite products and its mould design

填料粒度对石墨制品传导性能的影响

Effect of granularity of starting material on conductive properties of bulk graphite

柔性石墨制品及其生产工艺

Finished Products from Flexible Graphite and Their Production Technology

炭-石墨制品石墨化裂纹原因分析

Analysis on reasons of graphitization cracking for carbon-graphite products

柔性石墨制品的安装、使用与失效分析

Installation ;; Use and Failure of Flexible Graphite Products

用生石油焦粉制造高密度细结构石墨制品

Manufacture of graphite artifacts with high density and fine structure by green petroleum coke powder

国外提高炭石墨制品性能的一种有效的补强措施&浸渍

Effective reinforced measure of improving the properties of carbon & graphite products from abroad impregnate

含硼石墨制品总硼含量化学分析方法的探讨

An approach to the chemical analysis method for total boron content of graphite contained boron

石墨制品废料用作锂离子电池负极活性材料的研究

Research on using the processing graphite wastes as the negative electrode active materials for lithium ion batteries

石油焦煅烧是预焙阳极和石墨制品生产的主要工序之一。

The calcinations of Petroleum coke is one of the main for producing pre-baked anode and graphite products .

以煅烧石油焦为基本填料，煤沥青为粘结剂，采用热压工艺制备石墨制品。

The bulk graphite was prepared from starting materials of calcined coke and coal-tar pitch by the hot-pressing process .

柔性石墨制品、陶瓷纤维制品、尼龙制品、聚四氟乙烯包衬垫、四氟软棒、金属缠绕垫；

Flexible graphite products , ceramic fibre products , nylon , ptfe liner , four fluorine soft bag sticks , metal winding pads , Etc series products .

实验结果表明：用粒径为1.50～0.90mm的煅烧石油焦颗粒与其细粉配合使用，可使石墨制品的导电和导热性能最佳。

Results show that the best conductive properties of the bulk graphite can be obtained by using the calcined coke with size of 1.50 ~ 0.90 mm and powder .

概述了炭石墨制品抗冲击强度试验方法的研究过程，并用误差估计理论论证了该方法的科学性和可行性。

Summarized the research course of resisted impact strength test procedures of carbon graphite products , demonstrated science and the feasibility of this method with the error estimation theory .

针对国防配套用炭石墨制品的特殊性、重要性、广泛的应用性，从四个方面介绍炭石墨材料的性能，应用状况及存在的问题。

The properties application and presence questions of carbon-graphite materials were introduced from 4 parts according to the special property , importance , extensive application of carbon-graphite prod - ucts for national defence mating .

配料、混捏工序是炭和石墨制品生产过程中的前期生产工序，也是主要生产工序，工艺参数及设备运行情况决定着后续工序的成品率。

The batch and mixing process is the previous and major process of charcoal and graphite products . And the end products ratio of subsequent processes is counted on the process parameters and the equipment statuses .

列举了炭－石墨制品常见的焙烧裂纹形状，分析了各种裂纹产生的原因，提出了生产过程减少焙烧开裂废品的一些工艺措施。

The common roasting craze shapes of carbon-graphite products were lits , the reason of all kinds of craze were analyzed , some technology measures in order to reduce roasting craze waste during production were put forward .

焦炭颗粒是生产碳石墨制品的主要原料，它的粒度组成、分布及其微观结构不仅对碳石墨制品的机械性能和理化性能有一定的影响，而且还直接影响到各生产工序的成品率。

Coke particles are main raw materials for carbon graphite products . Its grain size composition and distribution , and microstructure have an effect on mechanical , physical and chemical properties for carbon graphite products and finished product ratio in manufacture of carbon graphite products .

从粘结剂焦化过程、炉内温度分布、升温速度、炉内气氛等方面分析了造成炭－石墨制品在焙烧中开裂的原因，并提出相应解决措施。

Abstract : The causes of the cracking of the carbon-graphite during roasting from the following aspects , the coking process of binder , furnace temperature distribution and thermometric speed and furnace atmosphere etc. , were analyzed and the appropriate measures to solve were suggested .

2D-C/C复合材料及其石墨化制品烧蚀特性分析

Ablation characteristics of 2D-C / C composites and their graphitized products

本公司为德国独资企业，是国际著名的石墨电碳制品专业制造商，产品被广泛用于电动工具、电器、汽车、工业等领域。

We are a Germany-invested world-leading manufacturer of carbon products with wide applications in power tool , home appliance , automotive and industrial fields .

碳电极、碳刷、灯碳棒、电池碳棒及电气设备用的其他石墨或碳精制品，不论是否带金属。

Carbon electrodes , carbon brushes , lamp carbons , battery carbons and other articles of graphite or other carbon , with or without metal , of a kind used for electrical purposes .

是一家专业生产销售石墨模具、石墨制品的厂家。

Is a professional production and sale of graphite mould , graphite products manufacturers .

温度场不均匀的主要原因是发热体布置方式和功率配比不合理以及石墨舟和烧结制品的摆放和结构不合理。

The unreasonable arrangement of heaters ' structure and power , and the unreasonable distribution of graphite boards and sintered products are the major causes of the uneven distribution of temperature field .

主要介绍了在石墨化生产工艺过程中，引起炭-石墨制品裂纹的各种因素，分析了在石墨化热处理过程中产生裂纹废品的主要原因，并提出了相应的预防措施。

This article will introduce the factors that cause the cracking of carbon-graphite products in the process of graphitization producing technology and give the preventive measures on the basis of analyzing the main reasons for the waste products with cracking during the heat treated of graphitization .