石墨纤维

  • 网络GRAPHITE;Graphite Fiber;graphite fibre
石墨纤维石墨纤维
  1. PAN系石墨纤维的拉伸断裂机制

    The tensile failure mechanism of pan - graphite fiber

  2. 本文较为系统、全面地研究了各种气氛冷等离子体对石墨纤维(GrF)的表面处理。

    The surface treatment of graphite fibers with Ar , N2 , O2-plasma was studied .

  3. 提高PAN石墨纤维插HNO3后电阻率稳定性的探讨

    Study on Raising Stability of Resistivity for Graphitized PAN Carbon Fiber Intercalated Nitric Acid

  4. 对以PEEK塑料和环氧树脂为基的石墨纤维增强复合材料的试验计算结果与应力法确定的材料的断裂韧性值符合得较好。

    The fracture toughness values determined with energy method were close to ones with stress method for the graphite / PEEK and Epoxy Laminates .

  5. 激光拉曼光谱(LRS)可用来研究碳纤维和石墨纤维的结构。

    Laser raman spectrum ( LRS ) were studied on structure of carbon and graphite fibres .

  6. 用石墨纤维毡和活性炭颗粒分别制备了多硫化钠/溴(PSB)液流储能电池用流通型(flow-through)电极和流经型(flow-by)电极。

    Based on graphite felt and activated carbon particle , flow-through and flow-by electrodes for sodium polysulfide / bromine ( PSB ) redox flow battery are prepared respectively .

  7. 本文采用离子束溅射技术(IBS),以石墨纤维布为基底,制备了Pt/C、PtRu/C、PtTi/C和PtNi/C催化电极材料。

    In the present paper , the Pt / C , PtRu / C , PtTi / C and PtNi / C electrode materials were prepared by ion beam sputtering ( IBS ) Pt and its alloys on graphite fibrous cloth .

  8. 非连续石墨纤维增强镁基复合材料热性能研究

    The Thermal Properties of Uncontinued Graphite Fiber Reinforced Magnesium Matrix Composites

  9. 石墨纤维表面冷等离子体处理的研究

    The surface treatment of graphite fibers with cold - plasma

  10. 挤压法制取银-石墨纤维型触头材料

    Silver & graphite fibre type materials used for making contacts

  11. 石墨纤维阳极氧化表面处理的研究

    Studies of anodic oxidative surface treatment of graphite fibers

  12. 国产石墨纤维及其复合材料层板工艺试验研究

    Processing Tests for Domestic Graphite Fiber and Composite Laminate

  13. 电化学插层后,石墨纤维的电阻率下降。

    The electric resistivity of graphite fiber can be decreased by electrochemical intercalation .

  14. 低电阻率插溴石墨纤维的制备及其性能

    Preliminary investigation on the preparation and properties of the low electrical resistivity bromine-graphite fiber

  15. 石墨纤维在不同气氛下的高温热稳定性研究

    Thermal stability of graphite fibers under different atmosphere

  16. 碳纤维和石墨纤维增强铝复合材料界面反应与性能的关系

    Correlation between interface reaction and properties of carbon and graphite fibre Reinforced Aluminium Composites

  17. 微观结构的改善是石墨纤维抗拉强度和弹性模量提高的主要原因。

    This contributes to the increase of tensile strength and modulus of the graphite fibers .

  18. 石墨纤维增强铝基复合材料在空间遥感器镜筒结构中的应用

    Application of graphite fiber reinforced aluminum matrix composite to body tube structure in space remote sensor

  19. 本文利用冷等离子体技术对石墨纤维表面进行了连续空气冷等离子表面处理。

    In this paper , the surface of graphite fiber is treated continuously by using air-cold plasma .

  20. 通过阳极氧化法将HSO-4插入石墨纤维中,研究了插层前后石墨纤维电阻的变化及其稳定性。

    HSO - 4 can be intercalated into graphite fiber ( GF ) by anodic oxidation . The resistance variation and stability of the intercalated GF have been investigated .

  21. 纳米碳纤维是通过裂解气相碳氢化合物制备的一种非连续石墨纤维,是近年来兴起的一种新型亚微米增强材料。

    Carbon nanofibers ( CNFs ), a kind of discontinuous graphite fiber prepared by pyrolysis of vapor-phase hydrocarbon , is a new type submicron reinforcing material arisen in recent years .

  22. 用阳极氧化法可以在不添加氧化剂和不使用发烟硝酸的情况下,将NO3~-插入石墨纤维中,降低石墨纤维的电阻率。

    Under no adding oxidant and no using fuming nitric acid , nitric acid can be intercalated into graphite fiber by anodic oxidation method , thus the electrie resistivity of the graphite fiber will be decreased .

  23. 介绍了高温测量中传统温度传感器的缺陷,提出了一种新型的非金属温度传感器&石墨纤维热电偶,并对该传感器的特性、加工方式、应用环境进行了分析。

    The limitation of traditional temperature sensor in high temperature measurement is introduced . A new nonmetal temperature sensor & graphite fibre thermoelectric couple is put forward , and the characteristic of sensor , machining manner , and application environment are presented .

  24. 因此对石墨纤维布上负载铂基(铂铜合金)掺镧薄膜电极的研究有望制备出载铂量低、催化性能好的催化剂,即可保证高催化活性的同时大幅度降低催化剂成本。

    So , the research of platinum-based membrane electrode doped with lanthanum and supported with graphite fiber is expected to prepare out the catalyst with low volume of contained platinum and high catalytic performance , which can cut cost largely and insure high catalytic activity .

  25. 对国产的三种原丝工艺和三种预氧化工艺制成的碳纤维进行了试验和分析对比,并就国内外三种不同原料制成的石墨纤维做了研究。

    Experiments for the purpose of comparison have been made on the technology for three kinds of precursors and on the carbon fibres manufactured by three kinds of methods of pre-oxidation , and research has carried out on three kinds of graphite fibres manufactured at home and abroad .

  26. 进行了高模炭(石墨)纤维工艺的研究。

    The processing technology of high modulus carbon fibers were studied .

  27. 连续碳(石墨)纤维增强铜基复合材料的摩擦磨损行为

    Friction and wear behavior of Cu MATRIX-CANBON ( graphite ) fiber composite materials

  28. 碳(石墨)纤维增强镁基复合材料的界面研究

    Study of the C / Mg Interface in Magnesium Matrix Composites Reinforced by Carbon ( Graphite ) Fiber

  29. 研制了以石墨碳纤维吸附物质为代表,作为简单、耐用且性能优良的固相微萃取装置的吸附基质。

    A simple and durable solid-phase microextraction ( SPME ) device with excellent function was made using carbon fiber as an alternative adsorbent .

  30. 碳纤维或石墨碳纤维已经被开发制作各种各样的产业用纺织品,并且也可以制作某些服用织物。

    Carbon or graphite fibers have been developed for use in various types of industrial textiles and in some types of consumer goods .