白车身

主成分分析在白车身焊装误差控制中的应用

The Application of Principal Component Analysis in BIW Welding Error Control

给出了一个白车身测量数据的计算实例。

An example of calculation about the practical measured data on BIW is given .

基于Web的白车身三坐标测量数据处理分析系统

Three-coordinate measuring data processing analysis system for body in white based on Web

汽车白车身焊装生产线的PLC控制系统设计与实现

Based on the PLC Control System Design and Realization of Car Body-in-white Welding Manufacture Line

桑塔纳2000型白车身检测的DEA测量机

Description of DEA Measuring Basis for Body in White Checking of Santana 2000

面向轿车白车身生产过程的BOM多视图研究

BOM multi - view research on car BIW

通过实验对基于Modbus协议的白车身视觉检测的控制系统进行了验证。

Through experiments , the control system of the car-body visual inspection based on Modbus protocol was authenticated .

主要说明了点焊机器人在白车身焊接中位姿矩阵的计算，并用CATIA软件对机器人的运动轨迹进行仿真。

The calculation of point welding robot 's positional matrixes in wielding car-body-in-white is discussed in this paper , and the spatial motion trail of the robot is simulated with CATIA .

在白车身制造尺寸质量控制过程中，主要采用样架、三坐标测量机（CMM）、在线三坐标测量机（OCMM）进行检测。

In the body-in-white ( BIW ) manufacturing dimension quality control process , three methods used are the checking fixture , CMM and OCMM .

通过实验和CAE模态分析建立了某SRV白车身的有限元模型和声腔有限元模型。

To a certain SRV ( sport recreational vehicle ), firstly BIP ( body in prime ) FE model and acoustic FE model were built by experiments and CAE modal analysis .

建立了某运动休闲车（SRV）白车身的有限元模型并进行了模态分析，得到了SRV白车身的固有频率和振型。

The finite element model of body-in-white of a SRV is established . The implicit frequency and vibration types are obtained by modal analysis .

基于eM-Carbody平台的轿车白车身工艺规划系统

Car-body-in-white Process Planning System Based on eM-Carbody

诸先生非常希望运用自己丰富的技术和商业经验，和汽车行业的客户共同协作，推动铝板在白车身（BIW）部件方面的运用。

Zhu is very interested in working with automotive customers in promoting the applications of aluminium panels in BIW parts while utilizing his rich technical and business experience .

在分析白车身焊接规划的专家系统时采用的是结构化分析方法。通过结构化分析，编写了专家系统，以及专家系统和CAR仿真软件eM-workplace的接口，完成了焊接规划的焊点规划任务。

Based on the structure analysis and programmed expert system and interface of expert system and eM-workplace , the planning of robot-station in the process of the body in-white manufacture is solved .

设计并成功进行了依维柯A40新客车白车身模态试验，获得了其动力学特性。

The modal test of the body-in-white was designed and carried through successfully , and the dynamic properties of the body of the IVECO A40 new bus were obtained .

用有限元法对红旗CA7220轿车白车身的扭转刚度和弯曲刚度进行了研究。

The torsion and bedding stiffness of Hong Qi CA7220 car body-in-white ( BIW ) were analyzed with FEM .

采用UG软件建立了某国产轿车白车身静态分析有限元模型，计算并验证了其主要工况下的静态扭转特性，并进行了轿车车身静态弯曲挠度关于板单元厚度的灵敏度计算分析。

The static analyzing FEM model of a domestic car 's BIW is created with UG . Static twisting characteris-tics under the main modes are calculated and validated , and the sensitivity of the static bending deflection to thickness of plate element are analyzed .

白车身焊装线机器人控制理论及方法基于eM-Engineer的车身焊装车间人机工程仿真研究

Robot controlling and programming for spot welding line of BIW Research on Ergonomics Simulation of Car Body Welding Plant Based on eM-Engineer

分析了轿车白车身工艺规划的需求特点，提出了基于eM-Carbody平台的白车身工艺规划系统。

The paper presents an analysis of car-body-in-white process planning requirements and a proposed car-body-in-white process planning system based on eM-Carbody platform .

构造白车身（BIW）偏差流是提高汽车制造质量的重要手段，当前有着多种方法去构造白车身的偏差流，但效果不是特别满意。

It is a key way for improving the automobile quality to build the variation stream of body in white ( BIW ) . There are several ways to build it , but these ways are not always effective .

研究工作主要在以下两点展开：1.分析现行白车身尺寸质量控制体系并加以改进。

Analysis and improvement of current body-in-white dimension quality control system .

小波分析在白车身装焊误差监控过程中的应用

Wavelet Analysis in Body in White Welding Error Monitoring Process Applications

汽车白车身零部件结构安全性设计实例

Design Example of The Parts Structure for The Car White Body

白车身生产线规划系统软件体系结构的设计开发

The design and development of software architecture for BIW CAPP System

基于实测载荷谱的白车身疲劳寿命计算

Fatigue Calculation of BIW Based on the Measured Road Load Data

基于工业机器人白车身柔性坐标测量系统研究

Flexible Coordinate Measurement System Based on Industrial Robot for Car Body-in-White

虚拟环境下的白车身门、框匹配问题研究

The fitting problem study on the door and body-in-white in detail

白车身质量的评价指标与评价方法

Research on Valuation Indexes and Valuation Methods of the Car-Body Quality

白车身柔性测量机器人本体补偿方法

Main Body Compensation Method of Flexible Measuring Robot for Car BIW

冲压、焊接是白车身制造的两大不可或缺的工序。

Stamping and welding are indispensable processes in automobile body manufacturing .