燃烧机

燃烧机采用了分体式燃烧机，并用空预热器加热了燃烧用空气。

The burner adopts a separated burner and the air used for combustion is pre-heater .

低压、粗焦炉煤气自动燃烧机在锅炉上应用

The Application of one Automatic Burner for Low Pressure Coke Oven Gas

国外全自动燃油燃气燃烧机现状及发展趋势

The Present Status and Development Trend Worldwide of Full-automatic Oil Combustion Engines

全自动燃烧机叶轮的设计与试验研究

Design and Experiment Study on Impeller for Automatic Burning Machine

全自动轻油燃烧机的设计与分析

Design and Analysis for Automatic Light Oil Burning Machine

燃气燃烧机安全操作的自动控制

Automatic Control of Safety Operation for Gas Burner System

浅谈木粉燃烧机在林产工业中的应用

Application of wooden powder burning machine in forestry industry

国产全自动一体化燃烧机在锅炉上的应用

Application of Domestic fully-automatic Integrated Combustor to Boiler

全自动燃烧机程控器

The Proceeding Controller for Automatic Burning Machine

燃气燃烧机测试装置的研制

Development of Testing Device for Gas Combustor

结果表明，该叶轮完全满足燃烧机的工作要求，其性能达到国外同类产品的先进水平。

The result shows : this impeller totally meets the requirements for the burning machine , reaching the advanced level of the foreign product .

在对该系列气体燃烧机控制系统进行深入分析的基础上，提出采用电子式程控器来取代机电式程控器。

Based on further analysis of this series of gas burning machines , electronic control proceeding controller , instead of electromechanical proceeding controller , was adopted .

按燃烧机的不同型号，对风门进行适当的调节，使风油比达到最佳状态；

The adjustment of the draft , according to the different types , combustion machines for proper regulation , after that the wind than reach the best state ;

介绍了燃气燃烧机用燃气/空气比例调节装置的结构并对其工作原理进行了较深入的分析，描述了其在外界条件变化时的工作过程。

The structure and the working principles of GAS / AIR Proportional Adjusting Device used in gas burners are presented , and its working processes are analysed when the outside condition is changed .

采用UG建模和ANSYS有限元分析相结合的方法对航空发动机燃烧室外机匣进行瞬态动力分析。

The author analyzed the transient dynamical response to combustor outer casing of an aero-engine based on UG modeling and ANSYS FEM analysis .

构建了包含PAH和NOx生成反应机理的正庚烷氧化反应详细模型，应用该模型对富氧燃烧柴油机的燃烧路径进行研究。

The combustion path was researched by a detailed n-heptane oxidation reaction combined model which was constructed in this paper including PAH and NOx reaction mechanism .

排气再循环（EGR）对稀薄燃烧汽油机燃烧特性的影响的试验研究表明，加入适量的EGR，能使NOX排放显著地降低而对HC排放和燃油经济性影响不大。

The experiment of the EGR 's influence on lean burn gasoline engine performance and emissions showed that using moderate EGR ratio , NOX emission can be effectively reduced without suffering much fuel economy and power output and HC emission of the engine .

直喷式油膜雾化燃烧柴油机活塞高温隔热涂层

Thermal Barrier Coating for Direct Injection Film Atomization Combustion Diesel Piston

基于控制的稀薄燃烧汽油机进气模型

Control-Based Intake Airflow Dynamics Model of Lean Burn Gasoline Engine

航空发动机燃烧室外机匣瞬态动力分析

Transient dynamical analysis of aero-engine combustor outer casing

稀薄燃烧汽油机爆震特性

Knock Property of Lean - Burn Gasoline Engine

对于某型气轮机原燃烧室机匣及改进机匣进行了有限元应力分析。

Finite element stress analyses were performed for the original combustor casing and the modified casing of a gas turbine engine .

计算结果表明，转子与静子相碰主要是由作用于刚度及强度均较弱的原燃烧室机匣上的燃气压力所引起。

The results of calculation indicate that the touching of rotor and stator was mainly cuased by the gas pressure exerting on the original combustor casing which has a relatively low strength and stiffness .

G系列两级燃烧气体燃烧机程控器的研究

Study on the Proceeding Controller for Automatic Gas Burning Machine s

对Gardner单缸和Ford四缸两种柴油机燃用含水量为10%容积比的乳化柴油与纯柴油油进行对比试验，以检验柴油掺水乳化燃烧对柴油机排放性能的影响。

The Gardner single and Ford multi-Cylinder two diesel engine burning emulsified diesel oil with 10 % by volume of water and diesel oil were tested , so that the effects of burning emulsified diesel oil for the emission characteristics of diesel engine were examined .

研制了一种高效变通道涡流室式燃烧室柴油机。

Anthors study out high efficient variable passage swirl combustion chamber .

浅析稀薄燃烧与汽油机的排放

The analysis of rare combustion and discharge gas amount in gasoline engine

实现预混合燃烧改善柴油机性能的试验研究

Study of improving diesel engine 's performance by premix combustion

富氧燃烧对柴油机排放特性的影响

The Effect of Lean - burn on Emission Characteristic for Diesel Engines

射流燃烧室汽油机活塞耐久性的试验研究

An Experimental Research on Piston Durability in a Gasoline Engine with Jet-combustion Chamber