热处理炉

针对间歇式热处理炉，提出了参数在线自调整模糊控制与仿人智能积分相结合的一种新型模糊控制方法。

Aiming to the intermittent heat treating furnace , a new style fuzzy control way by uniting fuzzy control of online adjusting parameter and intelligent integral control is introduced .

改进型双交叉控制在热处理炉中的应用

Improved double cross limit control applied in heat treating furnace

热处理炉计算机智能Fuzzy群控系统

An intelligent fuzzy group control system in heat-treatment furnace

三维非线性有限元在热处理炉CAD中的应用研究

Investigations on Applications of Heat Treatment Furnace CAD by Using 3D Nonlinear FEM

利用高温热处理炉对所有成分的材料进行了热处理，热处理工艺为分别在900？C和1100？C保温24小时。

High-temperature furnace was employed to conduct heat treatments for 24 hours at 900 and 1100 ℃, respectively .

PLC在真空热处理炉控制系统中的应用

The Application of PLC in Vacuum Heat-treatment Furnace

基于DSP的油气储罐罐板热处理炉控制系统的设计

Control System of Heat Treatment Stove for Oil and Gas Tank Steel Plate Based on DSP

基于Fuzzy-PID算法的热处理炉新型控制器

A new controller of heat treatment furnace based on fuzzy-PID

二者通过以太网相连，构成了基于PLC和工控机的热处理炉控制系统。

They are connected together via the Ethernet cable , compose the Roller-founds heat treatment furnace control system based on the PLC & IPC .

通过使用PID等运算指令，该系统能控制热处理炉，使炉温按照设计的温控曲线精确变化。

By using the operational command such as PID , the temperature of the furnace can change accurately according to the temperature controlling curve .

使用热处理炉、X射线衍射仪、电子探针等设备研究了3种18-8不锈钢在700℃氧化性能。

Heat treatment furnace , electron probe microanalyser , X-ray diffractometer were employed to investigate the oxidation behaviour of three kinds of 18-8 stainless steel at 700 ℃ .

热处理炉空气、燃料的控制均采用遗传算法优化的PI控制，炉体温度控制采用自适应的遗传模糊控制器。

Air and fuel controlling of this stove are realized by PI controller , and temperature controlling adopts self adaptive genetic fuzzy controller .

Marc有限元软件对真空热处理炉各层间的温度分布和炉温均匀性进行了计算。

Marc was used to calculate the temperature distribution of All-metal radiation shields and uniformity of furnace temperature .

DMT装置热油加热炉间接加热的热处理炉

DMT device hot oil heater indirect fired furnace

用自制的保温式多功能离子热处理炉对45钢进行了离子氮碳共渗+离子后氧化双重复合处理（Ion（NC+O）复合处理）。

The duplex treatment of plasma nitrocarburizing plus post oxidation ( Ion ( NC + O ) duplex treatment ) was carried out in a self-made heat isolated type of multipurpose plasma heat treatment furnace .

仿真的结果表明：论文设计的台车式热处理炉的燃烧过程的参数模糊自调整PID控制比传统的PID控制效果更好，精度更高。

Simulation results showed that : this paper maked the design the self-adaptive fuzzy-PID control method of the Car-heat treatment furnace combustion process control effect was better and higher accuracy than the traditional PID .

5×22m全耐火纤维台车式热处理炉

5 × 22m bogie hearth heat treatment furnace with full refractory fibre lining

目前热处理炉温度控制系统中常采用的PID控制器难以进一步提高温度控制系统的控制精度，无法与PC机进行通信，难以实现对热处理数据的管理。

The general PID controller adopted usually in the heat treatment furnace temperature control system is hard to improve temperature control performance , unable to communicate with PC and hard to manage the data of heat treatment .

介绍了用PLC可编程控制器、A/D模块、D/A模块、SCR、温度传感器等硬件组合的系统控制热处理炉。

A system composed by PLC programmable controllers , A / D modules , D / A modules , SCR , temperature sensor and so on to control the temperature of the heat treatment furnace were introduced .

基于TMS320X240X系列DSP芯片的油气储罐壁板热处理炉控制系统的设计，包括控制系统控制方案的确定、控制对象的建模、智能控制方法的实现、DSP的应用技术及试验结果等。

Control system of heat treatment stove for oil and gas tank steel plate based on DSP includes control project devising , plant modeling , realization of intelligent control methods , technology of DSP applying and testing result , and so on .

对炉温均匀性进行了实验测量，模拟结果与实验结果吻合较好。Marc对400kW立式真空热处理炉的温度场进行了模拟计算。

An experiment for measuring the uniformity of furnace temperature was carried out . The results of numerical simulation agree well with the experimental results . Marc . The uniformity of furnace temperature was measured .

TMR-13.85燃煤台车式热处理炉的设计与应用

Design and Application of TMR-13.85 Coal fired Bogie Hearth Type Heat treatment Furnace

D-200A型网带式热处理炉计算机控制系统设计

Design of A Computer Control System of D 200A Mesh Belt Heat Treatment Furnace

采用PCS7控制系统在轧钢厂实现了辊底式热处理炉钢坯生产过程的在线优化控制和管理。

An on-line optimizing control and management of processing of roller-hearth furnace have been realized in the rolling plant using PCS7 control system .

介绍蓄热式钢丝热处理炉的工作原理和特点，与传统钢丝热处理马弗炉进行对比，结果显示：对于直径5.0mm的钢丝，热处理能力由5084t/a提高到10800t/a；热效率由13%~15%提高到45%~49%；

To introduce working principle and characteristic of accumulation heat treatment furnace for steel wire . T , the heat treatment ;

本文列举了单片机在热处理炉中的一个实际应用，并对设计的WDY-1温控仪的组成及主要电路的作用进行了详细的介绍。

Practical application of one-chip computer in heat-treatment furnace is listed , and detailed introduction is given to the compositions and the main functions of WDY-1 temperature control meter .

网络理论在热处理炉温度测量上的应用

Application of network theory to measurement of heat treatment furnace temperature

热处理炉的结构对聚碳硅烷纤维不熔化均匀性的影响

Influence of Furnace Structures on the Curing Uniformity of Polycarbosilane Fibers

基于模糊控制规则自修正算法的热处理炉系统

Heat Treatment Furnace System in Rule Self-Revise Algorithm of Fuzzy Control

产生式算法的热处理炉炉温控制系统

The Temperature Control System With Productive Algorithm for Heat Treatment Furnace