热加工

无氧化加热技术是热加工技术发展的主要方向之一。

The heating technology in a non-oxidation state is one of the main development directions for hot-work .

葡萄酒冷冻处理技术，葡萄酒热加工技术，葡萄酒稳定性研究，葡萄酒用水树脂处理新技术等方面都取得了重大的成就。

And the techniques of freezing treatment , hot-work , stability research and plastic resin treatment of water utilized for wine have also made great achievements .

千瓦级组合式CO2激光热加工机

Combined CO_2-laser Heat Treating Machine of 1000 W Class

残余Cu对钢材热加工性能的危害及其抑制措施

Harmfulness of Residual Cu to Hot-working Properties of Steel and Its Suppression Measures

SiCP/FVS0812的热加工工艺及力学性能研究

A study of mechanical properties and hot working process of SiC_P / FVS0812 composite

有害元素Sn、Pb含量对不锈钢热加工性能的影响

Effect of Deleterious Element Sn and Pb Content on Hot Workability of Stainless Steel

低酸食品或pH值在4.5以上的产品的热加工是依据病原菌的芽孢的抗热性。

Thermal processes for low-acid foods or products with pH over 4.5 are based on thermal resistance of spores of microbial pathogens .

钨极气体保护焊（GasTungstenArcWelding，GTAW）是一种重要的机械制造热加工工艺，在工业生产中得到了广泛的应用。

As an important manufacturing technology , Gas Tungsten Arc Welding ( GTAW ) is widely used in industry .

本文研究了Nb对NiCrAlTi系镍基高温合金动态再结晶及热加工延性的影响。

The effect of Nb on the dynamic recrystallization and the hot ductility of Ni Cr Al Ti base superalloys was investigated .

TIG焊是一种重要的机械制造热加工工艺，在工业生产中的应用十分广泛。

TIG welding is an important thermal processing technology , and is widely used in industrial production .

MIM零件的先进热加工工艺及设备

Advanced thermal processing and equipment of mim-parts

结果表明，在热加工过程中，葡萄糖、果糖、蔗糖和抗坏血酸均能产生呋喃，pH、温度和加热时间在碳水化合物途径和抗坏血酸途径生成呋喃的过程中起到重要的影响作用。

Results showed that pH , heating temperature and heating time affected profoundly furan formation from solutions of glucose , fructose , sucrose and ascorbic acid in model systems due to thermal processing .

以实验数据为基础，建立了含硼微合金钢高温奥氏体晶粒尺寸及道次间软化程度与热加工工艺参数间的BP网络（人工神经网络）模型。

This paper has developed two BP network models relating austenite grain size and softening fraction with hot working parameters in microalloyed steel on the basis of experimental data in gleeble-1500 system .

Nb对Ni-Cr-Al-Ti系镍基高温合金动态再结晶及热加工延性的影响

Effect of Nb on Dynamic Recrystallization and Hot Ductility of Ni-Cr-Al-Ti Base Superalloys

定量表征了在热加工过程中，小分子酸和醇对PLA流动活化能和降解速率常数的影响。

The influences of the acids and alcohols on the flow activation energy and degradation rate constant of PLA during the thermal processing were quantitative characterized .

可为制订AZ31镁合金的热加工工艺提供理论与数据。

The constitutive equation could be applied to make technology of hot working for AZ31 magnesium alloy .

热加工对Zr-Sn-Nb合金显微组织的影响研究

Effects of Thermo-mechanical Processing on Microstructure of Zr-Sn-Nb Alloy

热加工和热处理对YBa2Cu3O（7-x）超导带材的相结构和氧的影响研究

Study of Hot-working and Heat Treatment Influence on Phase Structure and Oxygen Content in YBa_2Cu_3O_ ( 7-x ) Superconductor Strip

耐蚀合金G3、G3-Z和825热加工性的研究

A Study on Hot Workability of Corrosion Resistance Alloy G3 , G3-Z and 825

与铸态合金的变形抗力相比，均匀化处理可以显著减低Mg-Mn系合金在热加工过程中的变形抗力。

The homogenization treatment could reduce the resistance to deformation of Mg-Mn alloys during hot working .

柔鱼（OMMASTREPHESBARTRAMI）热加工特性变化的研究

Studies on characteristic changes of squid ( ommastrephes bartrami ) heated in boiling water

对不同热加工状态的AM50镁合金在不同试验温度下的拉伸性能进行了研究。

The tensile properties of magnesium alloy AM50 subjected to various hot-working conditions were investigated at different test temperatures .

SEM扫描电镜发现，经热加工的复合材料中最小的有机刚性粒子粒径可部分分散到60～80nm，该复合材料比超细有机刚性粒子复合的PP有更好的冲击韧性。

SEM photograph found that the organic rigid particles were separated into 60 ~ 80nm size in the composite by melting process , which has belter toughness compare with the PP compounded with ultra-fine organic rigid particles .

采用石油系重质油，在一定条件下热加工调制成各向同性沥青（TY01）和各向异性沥青（TY23）。

The isotropic pitch ( TY-01 ) and an isotropic pitch ( TY-23 ) have been prepared from the heavy oil of petroleum series , under the given conditions by hot working .

Mg-Y-Nd-Zr合金的高温变形行为与热加工性能

Hot deformation behavior and hot workability of mg-y-nd-zr alloy

试验结果表明，W合金化能改变高铌TiAl合金的铸态组织，但不能改变热加工组织以及4种典型组织和温度对其力学性能的影响。

The experimental results show that the W alloying changes the cast structure and does not change the structure after heat process of high Nb TiAl alloy . The W alloying does not change the influence of 4 typical structures and temperature on the mechanical properties .

对IN706合金的均匀化处理工艺进行了探索，同时研究了均匀化处理对材料热加工性能的影响。

The homogenizing treatments and it ′ s effect on hot workability of IN706 alloy was studied in this paper .

介绍了LZ50钢火车轴热加工连续生产线中采用的先进工艺、先进装置、先进技术及使用效果。

This paper introduces the advanced technics , devices , technology that used in the heat-treatment product-time of LZ50 steel axis and the using effect .

本文主要讨论热加工车间用耐热地面浇注料“TUFFLOOR”的性能和使用方法。

Properties and application of the heat-resist floor castable " TUFFLOOR " in heat process workshop are studied .

对低碳Mn-B贝氏体钢制前轴进行疲劳性能、热加工工艺和装车考核等试验。

Experiments on the fatigue properties , hot working technology and assembled truck verification of the front axle made of low carbon Mn-B bainitic steel have been performed .