激光核聚变

  • 网络laser fusion;laser nuclear fusion;icf
激光核聚变激光核聚变
  1. 主要研究工作有:论述了激光核聚变系统研究中波前畸变检测的重要意义。

    Main research work and new ideas as below : The importance of qualifying the wavefront distortion in ICF system is recounted .

  2. 在激光核聚变的实验研究中,高质量的靶标是实现点火的基础与保障,因此靶标的制作、装配、测量是激光核聚变中的一个重要环节。

    In the experiments of ICF , targets of good quality are the base and premise of the ignition , so the fabrications , assembly and measurement are very important to ICF experiments .

  3. 实时监测激光核聚变靶球涂敷状态的CCD成像系统设计

    Design of a CCD Imaging System for Monitoring Status of Micro-Sphere in Laser Fusion Target at Real-Time

  4. 重元素高电离的离子特性对研究激光核聚变和X射线激光等领域都很重要。

    The characteristics of the high Z ions are very important to the study of X ray lasing and other field .

  5. 对这种相互作用的深入研究可能会对激光核聚变和X射线激光等应用领域产生重大影响。

    It is hoped that clusters can play an important role in the fields of laser nuclear fusion and X ray lasers .

  6. 为了求解激光核聚变中的X射线能谱,我们在SAND迭代基础上提出了一种带有周期性光滑化的限幅迭代解谱方法。

    In order to solve X-ray spectra in laser fusion , an iterative method with amplitude-limiting and periodic smoothing technique has been developed on the basis of the SAND iteration in this paper .

  7. 介绍了大截面KDP晶体在激光核聚变中的应用,并简述了该晶体的研究动态。

    Application of large section KDP crystals in the study of laser fusion and stateofart in the study are introduced in the paper .

  8. 本文在SAND迭代法的基础上,采取带有周期性光滑化的限幅迭代方法,求解激光核聚变中的X光能谱取得了较好的结果。

    In this paper , an iterative method with amplitude-limiting and periodic smoothing technique has been developed on the basis of the SAND iteration . It has been used to solve the X-Ray spectra in laser fusion and satisfactory results obtained .

  9. LAP是一种新型的有机非线性光学晶体,由于其优异的性能,成为很有希望取代KDP晶体,应用于激光核聚变反应的晶体。

    LAP is a new nonlinear optical organic crystal , for higher damage threshold and harmonic generation in place of the conventional KDP in the laser fusion programme .

  10. 在激光核聚变(ICF)物理实验中,采用相干度较小的宽带倍频激光,能有效抑制高阶非线性效应和提高靶的激光辐照均匀性。

    In the experiment of laser fusion , broadband lasers , which are weak interference , can effectively restrain high order nonlinear effects and smooth the radiation upon the target .

  11. 激光核聚变KDP晶体的3项主要技术指标是:表面粗糙度、波纹度和透射波前,通过分析影响这3项技术指标的因素,提出了实现KDP晶体精密加工的超精密机床和工艺参数。

    The main targets of the KDP crystals in high power lasers are roughness , waveness and transmitted wave front . The ultra-precision machine and process parameters are presented by analyzing the effects on the three main targets .

  12. 激光核聚变装置中基于像传递的激光自动准直技术研究

    Image Transfer Based Automatic Laser Alignment Technique for Laser Fusion Facility

  13. 用于激光核聚变的可长时间单纵模稳定运转的Nd:YAG和Nd:YLF激光振荡器的研究

    Investigation of a single-axial-mode Nd : YLF oscillator for laser fusion system

  14. 由于激光核聚变研究工作的需要,促进了高功率钕玻璃激光器系统的发展。

    Laser fusion research has promoted the development of high power lasers .

  15. 激光核聚变中x-光解谱方法的光滑化技术

    A smoothing technique in method solved X-ray spectra in laser nuclear fusion

  16. 可用于激光核聚变的闪烁中子探测器

    A scintillation neutron detector for the laser fusion research

  17. 激光核聚变诊断设备双光束交汇瞄准技术研究

    Alignment technique for two-beam focus of laser-fusion diagnostic instrument

  18. 电光开关是激光核聚变即惯性约束核聚变驱动器所需的关键技术之一。

    Electric-optics switch is one of the key technologies for the development of ICF drivers .

  19. 激光核聚变靶表面几何参数扫描探针测量技术

    Measurement Technology of the Surface Characteristic of the Inertial Confinement Fusion Targets With Scanning Probe Microscope

  20. 用于激光核聚变装置的光路自动准直

    Automatic Optical Alingment for Laser-Fusion Facility

  21. 此后,中国就开始系统研究激光核聚变问题。

    Following this , China began its systematic research on the technology of laser-based nuclear fusion .

  22. 激光核聚变的一维三温度计算

    One-dimensional three-temperature calculations for laser fusion

  23. 曾从事激光核聚变的计算机模拟研究和奇异摄动问题的数值解法研究。

    He has researched in computer simulation for laser fusion and numerical methods for singular perturbation problem .

  24. 应用超精密加工技术解决了激光核聚变光学元件的大批量加工问题。

    The problems of batch manufacturing optical components in laser nuclear fusion are solved by applying the technology of the ultra precision machining .

  25. 激光核聚变研究是人类解决未来能源危机及改善严重环境污染的一项重大举措。

    The research of Inertial Confinement Fusion ( ICF ) techniques is a powerful act to resolve the energy crisis and environment pollution .

  26. 变线距光栅在同步辐射装置、激光核聚变装置上有着广阔的应用前景,它的制作和检测方法尚未成熟。

    Varied-line-space grating is very useful in synchrotron radiation devices and laser fusion devices , but there are no good ways to measure them .

  27. 高精度大口径光栅是天文物理学以及激光核聚变等领域必不可少的元件。

    High accuracy and large-aperture grating is an indispensable part not only in astrophysics but also in inertial confinement fusion systems and many other domains .

  28. 顺利建成了用于磷酸盐钕玻璃激光核聚变系统的准连续主动锁模调QNd:YLF振荡器。

    A quasi-CW actively mode-locked and Q-switched ( AMQ ) Nd : YLF oscillator for a phosphate Nd : glass laser fusion system has been developed successfully .

  29. 接着,在70年代末到80年代,中国建造了自己的用于激光核聚变研究的激光器&神光装置。

    Between the late 1970s and the 1980s , China manufactured its own laser device Shen Guang ( magical light ) for research into laser-based nuclear fusion .

  30. 激光核聚变是当今世界研究最多,发展最快的重大前沿科技领域之一。

    Inertial confinement fusion ( ICF ) is one of important science domains which are developed significantly quickly and studied by so many researchers in the present world .