液氢

yè qīng
  • liquid hydrogen
液氢液氢
液氢[yè qīng]
  1. 为此,提出了一种基于D-检验指标的优化PCA故障检测方法,并对其在液氢生产过程故障检测中的应用进行了研究。

    A optimized PCA fault detection method based on D-detection index is put forward , and its application to liquid hydrogen production fault detection is studied .

  2. 经过优化的冷包结构和尺寸分别为:内插件剖面为偏心椭圆,外壳为圆柱形;液氢厚度为2.6cm、开口尺寸为18cm。

    The optimal configuration and size are : transverse figure of insert is eccentric ellipse and that of crust is circle ; the thickness of liquid hydrogen is 26 mm and opening size is 180 mm .

  3. ICF靶丸中液氢层厚度的确定

    Calculation about the liquid H_2 thickness of ICF target

  4. H2-H2O气液氢同位素交换反应中Pt-SDB憎水催化剂的制备

    Preparation of Pt-SDB Hydrophobic Catalyst Used in H_2-H_2 O Isotope Exchange Reaction

  5. 介绍用作液氢贮罐等场合的扁平绕带式低温高压容器的设计理论与方法,提供了一只10m3液氢贮罐计算实例。

    The article is on the subject of the design theory and method about low temperature and high pressure vessel wound by steel strips used to hold liquid hydrogen , with the example of 10m 3 storage .

  6. 对液氢液氧火箭发动机,采用6种组分、8个反应有限速率的化学反应模型和Baldwin-Lomax代数湍流模型,得到流场参数在喷管中的分布。

    The combustion process in the LH 2 / LO 2 rocket engine was modeled using a 6 species and 8 step finite rate chemical reaction model , and the Baldwin Lomax algebraic turbulent model was adopted . The distributions of the flow parameters in nozzle were presented .

  7. 氢动力车用液氢贮罐的发展现状及展望

    The advance and Prospect of liquid hydrogen tank for hydrogen-powered vehicles

  8. 这种飞机将以液氧和液氢为燃料飞行。

    The plains will cruise on liquid oxygen and hydrogen fuel .

  9. 液氢诱导轮内部流场数值研究

    Numerical investigation of the flow field inside the liquid hydrogen inducer

  10. 液氢生产中防止固氧爆炸的方法

    Methods of avoiding the explosion of solid oxygen in liquid hydrogen production

  11. 液氢-液氧火箭发动机的推力测量

    Thrust Measuring of Liquid Hydrogen and Liquid Oxygen Rocket Engine

  12. 大型绕带式高压液氢容器的设计

    A Unique Flat Steel Ribbon Wound LH_2 High Pressure Vessel

  13. 多级液氢泵级间导叶的设计与改进

    Design and Improvement for Interstage Crossover of the Multistage Liquid Hydrogen Pump

  14. 铝液氢的界面反应过程动力学研究

    Study on the Kinetics of Hydrogen Aluminum Melt Interface Reaction

  15. 气枕压力对液氢贮箱热分层的影响规律

    Influence rule of tank pressure on thermal stratification in liquid hydrogen tank

  16. 液氢贮存及使用中安全监测技术的研究

    The research on safety monitoring technology in liquid hydrogen storage and utilization

  17. 一种新型液氢动力装置和它的热力学分析

    A New Type Liquid Hydrogen Powerplant and Its Thermodynamic Analysis

  18. 滚动轴承-火箭发动机液氢涡轮泵转子系统的动力特性分析

    Dynamic Properties Analysis of Ball Bearings-Liquid Hydrogen Turbopump Used in Rocket Engine

  19. 液氢液氧发动机喷管化学反应流数值模拟

    Numerical simulation of reacting flows in lo_2 / lh_2 rocket engine nozzle

  20. 液氢汽车前景展望浅谈汽车制动液

    Prospects for Liquid Hydrogen Car Discussion on auto brake fluid

  21. 浅谈制动液的吸水性液氢加注系统

    Discussion on water absorption of brake fluid Filling system of Liquid Hydrogen

  22. 基于模糊数据融合的液氢供应系统健康评价方法

    Health evaluation of liquid hydrogen providing system based on fuzzy data fusion method

  23. 液氢无损储存系统的最新研究进展

    Recent development of zero boil-off storage of liquid hydrogen

  24. LE-7发动机液氢涡轮泵研制中的问题

    The Problems Encountered in the Development of Liquid Hydrogen Turbopump of LE-7 Engine

  25. 使用的燃料为液氢、甲烷、丙烷和航空煤油。

    The fuels used are liquid hydrogen , methane , propane and kerosene .

  26. 液氢、液氧真空管路抽空技术探讨

    Discussion of deflation technology for vacuum tube of liquid hydrogen and liquid oxygen

  27. 与液氢相比,浆氢具有许多优点。

    Compare with liquid hydrogen , slush hydrogen has a lot of advantages .

  28. 火箭发动机液氢涡轮泵转子-密封系统的非线性动力稳定性

    Nonlinear Dynamic Stability of Liquid Hydrogen Turbopump Rotor-S eal System in Rocket Engine

  29. 液氢/液氧火箭发动机燃烧过程二维数值模拟分析

    Numerical simulation of combustion process in a liquid h_2 / o_2 rocket engine

  30. 液氢管路绝热设计与效果分析

    Insulation design and effect analysis of liquid hydrogen line