浸渍法

由浸渍法和沉淀法制备了两个系列的Ni/γ-Al2O3甲烷化催化剂，应用程序升温还原（TPR）对催化剂进行了表征，测定了催化剂的CO甲烷化活性及抗硫性。

Two series of Ni Mo / γ Al 2O 3 Methanation Catalysts were prepared by impregnation and coprecipitation , and characterized by TPR . Methanation activity and sulfur resistance of catalysts were examined .

结果表明固定化非晶态NiB合金催化剂活性高、稳定性好、抗硫性能强；浸渍法优于机械混合法。

The results indicated that the fixed alloys exhibited higher activity , stability and stronger sulfur resistance property than unfixed alloy , impregnation was superior to mechanically fixing .

LixMnO2的熔盐浸渍法合成和性能

Performance and synthesis of Li_xMnO_2 with melt-impregnation method

涂层浸渍法在Al2O3片上大面积合成碳纳米纤维

Large-area synthesis of carbon nanofibers and nanotubes on disk of Al_2O_3 by dip-coating

应用浸渍法对加铝样品进行二次Mg2+改性，调节强B酸和B酸的比例。

The aluminum-replenished samples were modified with Mg2 + by impregnation for adjusting the ratio of strong B acid to B acid .

采用TiO2浆料浸渍法在聚丙烯塑料上负载纳米二氧化钛薄膜。

TiO2 films are immobilized on PP by impregnating method .

CO2浸渍法加工软枣猕猴桃酒的研究甲醛浸渍法制备肠溶软胶囊的条件优化

Study on the processing technology of Actinidia arguta wine Studies on the Preparation Conditions of Formaldehyde Dip Method

KF/Al2O3催化剂的传统制备方法是将一定量的KF用浸渍法负载在层析Al2O3表面。

The classical KF / Al_2O_3 was prepared by immersing Al2O3 powder into KF hydrous solution .

本文首先研究了光催化剂的制备方法&溶胶-凝胶法（SG）和沉淀-浸渍法（PD）。

The preparation methods of photocatalysts & sol-gel ( SG ) and precipitation-dipping ( PD ) were studied .

然后再采用溶胶浸渍法将TiO2和ZnO溶胶灌充到PS模板微球的间隙内；

Subsequently , precursors sols of TiO2 and ZnO filled the spaces between the close-packed arrays of polystyrene spheres through sol-dipping method .

超声浸渍法对CuO/CeO2/γ-Al2O3催化剂催化燃烧挥发性有机化合物性能的影响

Effect of preparation by ultrasound-assisted impregnation on properties of CuO / CeO_2 / γ - Al_2O_3 catalysts for catalytic combustion of VOCs

浸渍法VO2薄膜的相变

Phase transition of vo_2 thin films prepared by dip-coating technique

通过混合法和共浸渍法合成了系列负载型WP加氢精制催化剂。

Supported tungsten phosphide catalysts were prepared by mixing and co-impregnation method .

以玻璃纤维布为载体，采用P25高活性TiO2粉末为原料，用浸渍法和粘结剂法制备了负载型TiO2光催化剂。

Glass fiber cloth supported TiO2 photo-catalyst was successfully prepared by using dipping method and adhesive method .

浸渍法工艺制备的多孔HA孔径在15～40μm之间，总孔隙率在65%～75%之间。

The pore size of porous HA by the dipping method was 15 ~ 40um and the porosity was 65 % ~ 75 % .

通过浸渍法对合成MCM-41材料进行氧化锰纳米团簇装载，并研究装载对有序介孔结构的影响。

Manganese oxide nanoclusters were loaded into the ordered mesoporous MCM-41 by using impregnation technique .

用同一浸渍法但焙烧、还原条件不同制成了两种Ir-Al2O3催化剂，考察了浸渍、焙烧及还原后各样品的Ir（4f），Al（2p）N（1s）的XPS谱图。

Two Ir-Al2O3 catalysts prepared by the same impregnation method but under different calcination and reduction conditions were investigated by XPS .

以合成有序介孔材料MCM-41为主体材料，通过浸渍法及后续热处理工艺，在孔道中组装氧化铕的团簇粒子，并对其进行结构表征。

Europium oxide nanoclusters were synthesized within ordered meso porous MCM-41 by using wet impregnation technique .

采用γAl2O3载体，通过浸渍法合成了Mo（W）Ni/γAl2O3系列催化剂。

A series of Mo ( W ) - Ni / Al_2O_3 catalysts were prepared by the dipping method with γ - Al_2O_3 as support .

采用改进的溶胶&凝胶技术制备了TiO2溶胶，并利用浸渍法将贵金属Pt负载到TiO2干凝胶表面制成Pt／TiO2光催化剂。

Titanium dioxide sol was prepared by a sol-gel technique and platinized titania ( Pt / TiO2 ) was synthesized by impregnation method .

为满足环保要求，采用浸渍法研制出一种新型高活性降烯烃催化剂，以Al2O3为载体，过渡金属为活性组分。

A highly-active olefin-reducing catalyst was prepared by impregnation using γ - Al_2O_3 as the carrier and transitional metals as the active components .

目的：探讨慢性胃溃疡时胃粘膜组织和血浆前列腺素E2的变化及不同针刺手法的调节效应。方法：①采用改良醋酸浸渍法造成大鼠慢性胃溃疡模型；

Objective : To study the change of PGE 2 and the effects of the different acupuncture methods on chronic gastric ulcer .

实验结果表明，V被加入到骨架中，而通过浸渍法加入的Co并没有进入到骨架中而是高度分散在孔道的表面。

Experimental results show that V is added to the skeleton , while Co which added by the impregnation method is highly dispersed on the pore surface instead of getting into the skeleton .

本文分别用A1203和NaY为载体，以碱土金属硝酸盐为前驱体，采用热分解法和浸渍法相结合制备固体碱。

Alkaline earth metal nitrate is precursors . Catalyst was prepared by the method that thermal decomposition and impregnated combined .

采用溶剂浸渍法和恒定应变四点弯曲方法研究了HDPE注塑制品的ESC行为。

2 , Using Solvent immersion method and constant strain four-point bending method research the ESC behavior of HDPE injection molded parts .

推论在沉淀法制备过程中铝与SiO2表面的化学作用强于浸渍法。

These results show that chemical interaction between Al and SiO_2 occurred in the precipitation method will be stronger than that in the impregnation method .

结果表明，与普通浸渍法相比，超声浸渍法制备的负载型Pd催化剂金属分散度明显提高，因而对蒽醌加氢反应表现出较高的催化活性。

The results show that the activity of the supported catalysts prepared with ultrasonic treatment for anthraquinone hydrogenation is higher than those without ultrasonic treatment . Methods : WHO standard bioassay ( dipping test ) .

采用溶胶-浸渍法，成功地在三维编织碳纤维的纤维表面涂覆SiO2，并通过碳热还原反应制得厚度约为0.55μm的SiC涂层。

The SiO2 coating on 3-D braided carbon fiber was prepared by the sol-dipping method . And also the SiC coating with about 0.55 μ m thickness was prepared by carbothermic reduction reaction .

在具有不同孔径大小的SiO2及MCM-41载体上，利用传统浸渍法合成了两类具有相同金属担载量、不同粒子大小的催化剂。

Over SiO_2 and MCM-41 supports with different pore sizes , a series of monometallic catalysts were prepared by traditional impregnation method with the same metal loading .

盐水浸渍法试验结果证明了成膜后LY12铝合金表面的腐蚀速率明显降低；

The data of salt solution immersion test indicate that corrosion rate of aluminium alloy LY12 with ceria thin film is decreased .