测功器

  • 网络Dynamometer;hydraulic dynamometer;Absorbed torque
测功器测功器
  1. 用MATLAB软件对柴油机带水力测功器系统进行PID控制器的设计

    Design of the PID Controller for the System of Diesel Driving Hydraulic Dynamometer by means of MATLAB

  2. DMC预测控制提高了测功器扭矩控制的响应速度;

    DMC predictive control improves torque responsive of dynamometer .

  3. 基于Windows的测功器试验台半实物仿真优化技术

    Hardware-in-the-Loop Simulation and Optimization Approach of Dynamometer Test Bed Based on Windows

  4. 第二是说明分压式线性传感器及其测试系统在柴油机水力测功器磅秤读数P(公斤)测量上的应用。

    The second is the application of this sensor which is used for measuring the parame - ter P ( kq ) of Diesel .

  5. 最后给出了所提仿真技术应用于电涡流测功器仿真和PID控制算法优化的实例。

    Finally , the application of HILS approach in the eddy current dynamometer test bed and the PID control algorithm optimization is given .

  6. 讨论了电流滞环控制的脉冲整流器在电力测功器中的实际应用,基于数字信号处理器TMS320F240设计了控制电路。

    This paper presents the application of hysteresis current control PWM rectifier in electric dynamometer .

  7. 利用MATLAB软件包及Robust-ControlToolbox对柴油机带水力测功器系统进行了H∞鲁棒控制器的设计研究,介绍了设计方法、设计过程和设计结果,并对设计控制器进行了仿真分析。

    This paper investigates the design of H ∞ robust controller for the system of diesel driving hydraulic dynamometer , using the software package of MATLAB with robust-control toolbox . The method and procedure of design are provided , and the design results are presented and analyzed .

  8. 在Froude水力测功器发动机试验台架上,借助于微机处理系统,对Ford柴油机燃用菜籽油与花生油对半掺合的植物油和柴油进行对比试验。

    A Ford diesel engine fueled by vegetable oils ( a 50 ∶ 50 blend of rapeseed and soybean oils ) and diesel oils was tested on Froude hydraulic dynamometer by using a computer system .

  9. CODAG测控系统实现了燃气轮机、柴油机和水力测功器的计算机远程集中控制。

    The testing and control system of CODAG carried out gas turbine , diesel and hydrodynamic power measure plant 's remote computer control .

  10. 关于提高D350型水力测功器读数精度及其稳定性调节性的问题

    Some questions about improving the scale reading precision , stability and adjustability of the d_ ( 350 ) hydraulic dynamometer

  11. 计时显示电路采用集成块,简单可靠,显示直观。本仪器和JGW电涡流测功器配套使用,适合于3~15kW手扶拖拉机在不拆卸条件下,对功率和油耗进行同步测量。

    The instrument is characterized , by high accuracy , simple and reliable operation and intuitive display , and able to be used in cooperation with JGW eddy current power meter , and applicable to synchronous measurement of fuel consumption and 3-15 kW walking tractor .

  12. 在测功器上,扭矩是与功率一道测量出的。

    Torque can be measured along with power on the dynamometer .

  13. 小功率交流电力测功器系统的研制

    Development of an Alternative-Current Dynamometer System for Testing Small Power Engines

  14. 提高水力测功器测试精度的方法探讨

    Discussion the Method of Improving Test Precision of Waterpower Dynamometer

  15. 水力测功器转子装配过程仿真分析

    A Simulative Analysis of Assembly Process for Hydraulic Dynamometer Rotors

  16. 国产电力测功器及其控制系统的可靠性分析

    Reliability Analysis of Domestic Electric Dynamometer and Its Control System

  17. DM&1型模拟加载测功器的计算机控制系统

    A Computer Control System for DM & 1 Simulation Load Power Meter

  18. 发动机测功器试验台架发电机组动态特性试验

    Dynamometer engine test bed dynamic characteristic test for generator set

  19. 交流电力测功器的结构与控制

    The Structure and Control of Alternative - current Electric Dynamometer

  20. 电涡流测功器自适应控制研究

    A Study on Adaptive Control for Eddy Current Dynamometer

  21. 再生能馈式电力测功器的设计与实现

    Design and Realization of Energy Feedback Type Electric Dynamometer

  22. 燃气轮机性能试验用的康氏水力测功器

    Kahn Hydraulic Dynamometers for Performance Testing of Gas Turbines

  23. 柴油机与水力测功器配合问题及对策研究

    On the Countermeasures of Match for Marine Diesel Engine and Hydraulic Power Detector

  24. 发动机测功器试验台架

    The engine works first-rate . dynamometer engine test bed

  25. 用于研究开发的汽车底盘测功器

    The Ultrasonic Motor R & D Chassis Dynamometer

  26. 汽车底盘测功器的标定方法和精度分析

    Calibration Method and Accuracy Analysis of Chassis Dynamometer

  27. 汽车底盘模拟测功器加载方案的优化设计

    Loading Optimization of Simulation Dynamometer for Vehicle Chassis

  28. 轮制测功器制动测力计移动电站自动测试设备

    Brake dynamometer mobile power station automatic test equipment

  29. 测功器数字显示的新方法

    The New Method of Digit Display for Dynamometer

  30. 对水力测功器转子的承载过程进行了仿真研究。

    This paper did a simulation research on the loading process of hydraulic dynamometry rotor .